We have about 60 of the same model computer and so we have an image we deploy if one goes down so we don't have to start from scratch. A machine went down and we replaced the motherboard but it will not boot from the image we have. It starts to boot, displays the swirly colors and then the Windows 7 logo and then it restarts.
We tried installing a fresh copy of Windows 7 and that works. Using the image that works in all of our other machines of the same model it tries to get us to do startup repair but it fails every time.
Windows 7 boots as normal to "Starting Windows" with MS icon but then goes blank. F8 and "Starting Windows normally" does not work. F8 into Boot Menu with a Windows 7 recovery disk in the drive reads it briefly but does not recognise it. If I can get beyond this stage I have a system image on a connected hard drive.
My computer is a Dell Inspiron Laptop with Windows 7. I just got it like a month ago. Recently it has decided to be a real bugger. Everytime I try to start it up, it either gets stuck on the "welcome" screen or advances past it and goes to a pitch black screen with just a cursor. I've also found that if I try to shut the computer down without just pressing the power button, it can't turn off.
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: unknown Problem Signature 4: 371 Problem Signature 5: Auto Failover Problem Signature 6: 1 Problem Signature 7: failure during setup OS version: 6.1.7601.2.1.0.2561 Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7 Processor Count: 4 RAM: 6050 Mb Graphics Card: Intel(R) HD Graphics Family, -1262 Mb Hard Drives: C: Total - 699443 MB, Free - 332975 MB; Motherboard: TOSHIBA, PEQAA Antivirus: avast! Antivirus, Updated and Enabled
I am convinced that my computer has been dishonored and is trying to commit Hari-Kari.This year-old Toshiba P755 came with Win 7 installed. This August after an automatic Windows Update it failed to startup properly. After logging in Explorer would freeze.I was able to start up in Safe Mode. Windows Update log showed that a half dozen updates had just been installed, and several had failed.I used Recovery and selected a restore point just before the update. All went OK and the computer now worked until the next time I shut down, whereupon it headed off to re-install the updates. This time I noticed it hung in the Installing Updates, do not turn off your computer" screen for many, many hours, eventually failing to install them.
I repeated this cycle three times over teh next few days, growing more desperate each time. Finally I found a kb on the MSDN site that sounded applicable. It had me download and install a "Mr. Fixit" utility. I did so, got one more lockup, then upon entering Safe Mode saw a new option: Repair Startup or some such. I tried it and lo, it worked. No more endless "Installing Updates" messages.I then changed the Windows Update mode to manual. It still sent me messages about updates being available, so I then turned off the Windows Update service.
All was quiet for three weeks. Then last Friday the same drill - hung after logging in. Only this time it has invented a more ominous way to die. I did the Safe Mode->Control Panel->Recovery drill (I can do it in my sleep now) and, uh-oh, it says I have no restore points! I used to have dozens....Looking at the update log, I only see three update that (I think) are when I installed Mr. Fixit. I went ahead and uninstalled them anyway. The computer wanted a reboot, and once again locked on the "configuring Updates" screen.Now I can only start up in Safe Mode with Networking, which is how I am able to write this.
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.
Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]
Specs: Toshiba laptop Win7 home premium 64-bit 3gb RAM freshly formatted hard drive original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
If I shut down my machine it can only start after a startup repair. However, if I hibernate it starts normally. What this means therefore is that I am no longer able to install new updates successfully especially those that require a shut down for a complete successful installation. What should I do?
I recently bought Windows 7. Sometimes when I start my computer, the USB will not work at the login screen. No keyboard or mouse works. If I get past the login, windows finds all my external hd's and starts to scan them. I think this is a problem with the USB.
Last night, i noticed i had low memory on my C drive. so I uninstalled a few programs - games mostly and needless addons - and then restarted. After restarting, the laptop got stuck at the bootup screen, at about 70%, then persisted to say "operating system not found" repeatedly.
This morning, after turning it on, it now gets past this screen, but says theres a "SMART failure predicted" on on my Hard drive. It also says ahard drive fail;ure is imminent. It does this for a few minutes, and then gets 'stuck' again at 70% at startup.
So.. is this a problem with my HDD? Everything points to this, but I'm not sure of my next step? Do i need to reinstall windows (problem, seeing as i don't have an installation disc)
For sometime now I've been attempting to fix a laptop that I have that was used by my sister. The laptop is a Compaq Presario CQ61 running Windows 7 Home Premium 64-bit. I believe the computer has a virus but cannot actually find out for sure if it does or not. I have ran many virus scans with multiple virus protections and still I'm getting blue screens of death, major jamming, as well as occasional start up fails. The computer jams up so badly that I can't use it for even simple tasks. If I try to up the start menu or any folders the computer jams up for about a minute before it responds. If I try to get on the web nothing at all will load no matter what web browser I'm using. The computer will also freeze up completely at random times and the only way to get it to respond is to restart it.
I have an issue which I need resolved. My hard drive had about 5 different partitions, one for Win7 x86, Win7 x64, Misc, Encrypted Data and Virtual Machines. The Encrypted Data partition was secured with BitLocker - The OS-partitions was _not_ secured with BitLocker. Now what happened was that I had to run the startup repair utility on my Win7 x64 installation and this completely messed up things for me. I have lost the Encrypted Data and Virtual Machine-partition.
I do not care about the VMs, but the Data contains vital information which I have not backed up yet. On top of losing the two partitions, a new partition called HP_tools re-appeared. This partition was removed when I scratched the OEM-installation approx. a year ago. I urgently need to recover this Data-partition. I do have unallocated space (between other partitions) on my hard drive, but none at the exact size of my encrypted partition.
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
Background Info: Dell laptops (E6420,E6410,XPS), Windows 7 Enterprise 64bit, Connected to AD
The laptops are intermittenly hanging at the "Please Wait" screen right before the alt + ctrl + Delete option appears. The time it hangs varies. Sometimes it can hang for 2 minutes, sometimes it could hang for an hour. So far the only pattern we could find is that it happens mainly while the computers are not connected wired to the LAN and on wireless. If we toggle the wifi off during the please wait, a few seconds-mins later it finally shows the option to login. I set the NLA service to manual startup (network list service was already set to manual as well), and it stopped doing it. I enable it, and it starts hanging on message again. It also works fine in safe mode (both networking and without).
Any suggestions or ideas? Would leaving the NLA service to manual cause any major conflicts? Are there any timeout settings we could verify?
Machine has Windows 7 Ultimate. I recently changed the hard drive. When I went boot, the screen displayed "Enter Password ". This machine has never had a password and I am at a loss as to what is wrong. This machine has previously been running well for over six months. Any HD that I substitute (I've tried four) has the same result.
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
Today when I went to turn on my Samsung laptop (with Windows 7), I got a ""Logon Process Initialization Failure" error message. I didn't even get to the screen which asks for my password to access the computer's functions. I tried to reboot into safe mode, but I got the same thing again. I can't open any program or even get to my desktop screen.
I found a Microsoft hotfix that appears to be for this problem, and although I saved the .exe file to my thumb drive from my desktop computer, I'm at a loss as to how to install it on my laptop when it won't operate correctly to download and run it!
(The Microsoft link that seems to address my issue is here: [URL]
The only thing that may have changed is that my old power cord to the laptop was frayed, and I ordered a new one off eBay. It's not a Samsung cord, but a replacement cord. My laptop worked fine with it for an entire day, then the following day is when this happened. I don't know if it's related to the problem or not.
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32 -one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
I have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32 -one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
I have a small three PC home network. Two PC are running Windows 7 and one running Vista.
All three machines have the same homegroup settings. The ability to view machines on the network is very patchy. One machine can see the others, while another machine can only see one other machine. Sometimes machines cannot see any others on the network.
All machines are connected wirelessly with strong signals through a BT 2700HGV Business Hub router. All of the machines can access the Internet without problems.
All machines run Eset Smart Security with the Windows firewall is turned off.
Any advice to create a stable network would be appreciated.
i'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
