Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6050 Mb
Graphics Card: Intel(R) HD Graphics Family, -1262 Mb
Hard Drives: C: Total - 699443 MB, Free - 332975 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled
I am convinced that my computer has been dishonored and is trying to commit Hari-Kari.This year-old Toshiba P755 came with Win 7 installed. This August after an automatic Windows Update it failed to startup properly. After logging in Explorer would freeze.I was able to start up in Safe Mode. Windows Update log showed that a half dozen updates had just been installed, and several had failed.I used Recovery and selected a restore point just before the update. All went OK and the computer now worked until the next time I shut down, whereupon it headed off to re-install the updates. This time I noticed it hung in the Installing Updates, do not turn off your computer" screen for many, many hours, eventually failing to install them.
I repeated this cycle three times over teh next few days, growing more desperate each time. Finally I found a kb on the MSDN site that sounded applicable. It had me download and install a "Mr. Fixit" utility. I did so, got one more lockup, then upon entering Safe Mode saw a new option: Repair Startup or some such. I tried it and lo, it worked. No more endless "Installing Updates" messages.I then changed the Windows Update mode to manual. It still sent me messages about updates being available, so I then turned off the Windows Update service.
All was quiet for three weeks. Then last Friday the same drill - hung after logging in. Only this time it has invented a more ominous way to die. I did the Safe Mode->Control Panel->Recovery drill (I can do it in my sleep now) and, uh-oh, it says I have no restore points! I used to have dozens....Looking at the update log, I only see three update that (I think) are when I installed Mr. Fixit. I went ahead and uninstalled them anyway. The computer wanted a reboot, and once again locked on the "configuring Updates" screen.Now I can only start up in Safe Mode with Networking, which is how I am able to write this.
last night I did the 13 required updates for my Windows 7. So, when I awoke this morning, in my attempt to load up into Windows 7 again, it failed, I tried again at least 6 time, and still nothing. It would get to "starting Windows" then go to a Grey screen.
've encountered in the last few days on my laptop. I may be wrong but I'm pretty sure it has happened since a Windows Update installed as I remember a big registry update....like I say, may be wrong! [code] My physical memory is pretty stable at around 1.6 to 1.7 Gb but my CPU spikes are just haywire and latency on keyboard strokes is driving me nuts! Even running no programmes the CPU is betwen 26 and 100%...whilst I'm running IE then it's 95 to 100%.The task manager graph is just a total zigzag.Unfortunately, i don't think I have a restore point to go back to pre-Update so I don't think I have that easy route out.
My system get freezes everything and suddenly goes into BSOD stating Driver Power State Failure. I am attaching the mini dump along with the screen shots. With Bluescreen View i could find out that it caused by ntoskrnl.exe
After an automatic update to my HP pavilion laptop computer, all of my word files are now saved in Word 2007 instead of Word 2010. I used the restore point and the problem disappeared. As soon as the update (identified as a critical update) occurred, the problem resumed.
my computer automatically updated on the 8th of may of this year, and now wont completely start up. Once the windows logo appears it restarts and goes through the process all over again, i've been dealing with this all day
yesterday I started expericing BSOD on startup with the following error message, I can boot system from safe mode; and i have ran memory diagnostic test and hard drive test can no problem has been found. Btw windows boots normally when I removes atikmpag.sys, I have attached a error dump file.
I ran into a problem on my Windows 7 Ultimate x64 on my MSI CR700x notebook a few weeks ago. For some reason, when logging in, after entering my password, I was stuck at the Welcome screen, that blue "waiting cursor" was still circulating, but nothing happened even after 10 minutes.Sometimes I didn't even get to the login screen, because after the "Starting Windows" screen, I was stuck at a black screen, where only the mouse cursor was shown. In both cases, the only way to quit was to shut down the computer using the power button. (in safe mode I could log in without problems)To workaround, I booted up from the recovery CD, and chose System Restore. I could only choose restore points related to Updates, after this, I could boot up and log in one time (!), however, after a second restart the same problem occured, and to even use the PC I needed to do a system restore from the recovery CD before each start. Automatic updates were turned on. After a few days I've had enough of it, so I decided to reinstall Windows, but after 3-4 days the same problem occured again. (updates were still turned on). So for a few weeks I even went back to XP. Now I have Windows 7 installed again, but with Automatic Updates turned off, and the system is working properly for a week now.But I don't want to keep Automatic Updates turned off. Which update causes these problems, and how to uninstall/disable it? Or is there a fix for that since then if it's a known/popular problem?
I get the BSOD when restarting my machine (which I rarely do). It kicks in several seconds after my desktop comes up. After it restarts, it's usually fine (although sometimes it hits a second BSOD). But, once it's up and stable, no more BSOD.
Since August I cannot install Windows 7 updates.Everything seem to go OK until "restart Computer"The installation gets to 16% then hangs and "Reverting back" message appears.I now have 11 updates but don't know what to do.
Windows 7 boots as normal to "Starting Windows" with MS icon but then goes blank. F8 and "Starting Windows normally" does not work. F8 into Boot Menu with a Windows 7 recovery disk in the drive reads it briefly but does not recognise it. If I can get beyond this stage I have a system image on a connected hard drive.
My computer is a Dell Inspiron Laptop with Windows 7. I just got it like a month ago. Recently it has decided to be a real bugger. Everytime I try to start it up, it either gets stuck on the "welcome" screen or advances past it and goes to a pitch black screen with just a cursor. I've also found that if I try to shut the computer down without just pressing the power button, it can't turn off.
We have about 60 of the same model computer and so we have an image we deploy if one goes down so we don't have to start from scratch. A machine went down and we replaced the motherboard but it will not boot from the image we have. It starts to boot, displays the swirly colors and then the Windows 7 logo and then it restarts.
We tried installing a fresh copy of Windows 7 and that works. Using the image that works in all of our other machines of the same model it tries to get us to do startup repair but it fails every time.
This occured just hours after I first registered for this website.I have had some problems with updating the drivers for my EVGA GTX 460 SE 1GB and it has been giving me h3ll about it.Innocently, just hours after I registered for this site, I was going to do a Windows update as I hadn't yet done one in weeks and decided to do the optional update on Windows 7 Pro for a new nVidia driver as I do with everything.When I downloaded it, installed, then restarted, my computer started to act kind of funny. For the most part it was pristine, but it started and continues to operate funny with the visual display.1) During the second Windows loading screen, the one after the glowing Windows logo, the screen quickly flickers to black and back to the screen during the process. It does this sometimes while I'm navigating in Windows as well using some programs albeit somewhat infrequently.2) The driver update screwed up my desktop display immensely as it is now. When I originally installed the nVidia driver from the EVGA cards software CD, I noticed the picture quality and resolution jumped up immensely and added higher resolutions to my desktop settings. Icons got immensely smaller, more windows with smaller text could fit on the screen, the cursor was half the size about, and my start menu and bar with it's icons, shrunk down a bit smaller too. That was the healthy behavior. Now when I did this Windows Update for the nVidia display driver it messed everything up to what it is now. Everything is blown up in size. And when I tried to uninstall all the nVidia software, restarting, and then installing it again using the latest driver download off of nVidia's website, the same stuff. I can see the uninstallation of the driver causes it to revert to I take it some default Windows visual driver lowering the max desktop resolutions and that reinstalling the driver off of the website does indeed add the higher resolutions and the visual appearance does change where the cursor, icons, etc. aren't as pixelated, but everything is still oversized instead of shrunken down like as is normal. It says my desktop is at 1680x1050 as the monitor is and what stuff on my desktop has on it looks more high-definition, but the actual size of icons, cursor, etc. almost suggest like it's running on a lower resolution.3) As I tried to reinstall the driver from the website and it didn't do much to change the problem, I tried instead to use the CD again and it's giving me h3ll about it. I even went so far as to uninstall it through both normal and safe mode boots and do a Norton Utilities scan to scan for junk files and registry entries as well as try some driver cleaner software to get rid of excess stuff that may not have been gotten rid of, and then use the EVGA driver CD. But the driver CD will show up the autorun window, but then when I try to install the drivers it gives me an error message saying "Access denied". Why is it doing that?And I know fully well it's the Windows Update of the nVidia driver that is doing this because it did it just after I installed it. It screwed things up BAD and will not do something so stupid as taking their nVidia updates from this point on, but the question still remains... How do I get the d@mn drivers to work PROPERLY? How do I get the visual display to be 100% FULLY WORKING?
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: unknown Problem Signature 4: 371 Problem Signature 5: Auto Failover Problem Signature 6: 1 Problem Signature 7: failure during setup OS version: 6.1.7601.2.1.0.2561 Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.
Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]
I have Windows 7 Pro 64bit set to automatically update the OS. Three days ago I lost connectivity on my shared home network that uses a Netgear WN2000RPTv2 wireless extender to connect to my Ruku which had worked perfectly to stream movies. (Amazon Prime). When I began to check out the systems for possible errors, I noticed that there had been updates for Netgear, several optional and one recommended. All failed with the error code of 80070103. I've tried unplugging my routers, did a hard restart to factory defaults, etc., all resulting in no change to the systems. The desktop pc connected to it is as follows:
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit Processor: AMD FX(tm)-8150 Eight-Core Processor, AMD64 Family 21 Model 1 Stepping 2 Processor Count: 8 RAM: 10079 Mb Graphics Card: AMD Radeon HD 7570, -2048 Mb Hard Drives: C: Total - 932364 MB, Free - 856809 MB; D: Total - 21079 MB, Free - 2654 MB; Motherboard: Gigabyte, 2AC8 Antivirus: Microsoft Security Essentials, Updated and Enabled
Specs: Toshiba laptop Win7 home premium 64-bit 3gb RAM freshly formatted hard drive original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
Been trying since 9/21 to install these two updates. I have tried the solutions suggested at Microsoft Community to no avail. I was able to install a Win Defender update today, but not these two
I recently bought Windows 7. Sometimes when I start my computer, the USB will not work at the login screen. No keyboard or mouse works. If I get past the login, windows finds all my external hd's and starts to scan them. I think this is a problem with the USB.
I can't update halo Combat Evolved, the update starts and opens 'chktrust.exe' which proceeds to crash and stops the update. I've searched google and microsoft answers, and the KB articles related to halo, with no luck at all. I even went and bought a new copy of the game and had the same problem. Both copys install and update on my other computer with no problem, which is running win 7 x64. The one I'm having the trouble with is running win 7 home premium x86, it's an eeepc 1201n (dual core atom netbook with nVidia ION). I have had no other problems with the netbook other than this one with halo, other games update fine everything runs great no bluescreens or other crashes, everything is updated and I keep my computers clean and in working order.
I'm running Windows 7 Home Premium 32bit. Windows Security Essentials for antivirus and Windows firewall as my firewall. For a few months now Windows has failed on the automatic updates. The updates are:
Security Update for Windows 7 (KB2556532) Security Update for Windows 7 (KB2532531) Security Update for Windows 7 (KB2536276)
[Code]....
I tried following the steps in this article: You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
I tried starting windows in safe mode, but windows update will not run then. I tried doing a clean boot by following the steps in the article but no success. I tried turning off the antivirus and firewall but that did not help either. Then the article runs out of ideas so here I am.
I have Hp Pavillian, Windows 7 Home Premium Edition, 64bit system. Everytime Windows downloads Windows updates, it is successfull downloading and installing, however, I then get a message saying: Failure configuring Windows Updates, Reverting Changes, Do Not turn off your computer.
I have gotten Windows Fixit for Windows Updates and installed....but that does not clear up the problem. I have not wanted to use Restore feature of Windows 7, since I have installed many critical programs that I use. Is there any other solution out in Cyberspace that will help resolve the "Failure Configuring Windows Updats".
Last night, i noticed i had low memory on my C drive. so I uninstalled a few programs - games mostly and needless addons - and then restarted. After restarting, the laptop got stuck at the bootup screen, at about 70%, then persisted to say "operating system not found" repeatedly.
This morning, after turning it on, it now gets past this screen, but says theres a "SMART failure predicted" on on my Hard drive. It also says ahard drive fail;ure is imminent. It does this for a few minutes, and then gets 'stuck' again at 70% at startup.
So.. is this a problem with my HDD? Everything points to this, but I'm not sure of my next step? Do i need to reinstall windows (problem, seeing as i don't have an installation disc)
For sometime now I've been attempting to fix a laptop that I have that was used by my sister. The laptop is a Compaq Presario CQ61 running Windows 7 Home Premium 64-bit. I believe the computer has a virus but cannot actually find out for sure if it does or not. I have ran many virus scans with multiple virus protections and still I'm getting blue screens of death, major jamming, as well as occasional start up fails. The computer jams up so badly that I can't use it for even simple tasks. If I try to up the start menu or any folders the computer jams up for about a minute before it responds. If I try to get on the web nothing at all will load no matter what web browser I'm using. The computer will also freeze up completely at random times and the only way to get it to respond is to restart it.
I have an issue which I need resolved. My hard drive had about 5 different partitions, one for Win7 x86, Win7 x64, Misc, Encrypted Data and Virtual Machines. The Encrypted Data partition was secured with BitLocker - The OS-partitions was _not_ secured with BitLocker. Now what happened was that I had to run the startup repair utility on my Win7 x64 installation and this completely messed up things for me. I have lost the Encrypted Data and Virtual Machine-partition.
I do not care about the VMs, but the Data contains vital information which I have not backed up yet. On top of losing the two partitions, a new partition called HP_tools re-appeared. This partition was removed when I scratched the OEM-installation approx. a year ago. I urgently need to recover this Data-partition. I do have unallocated space (between other partitions) on my hard drive, but none at the exact size of my encrypted partition.
