yesterday I started expericing BSOD on startup with the following error message, I can boot system from safe mode; and i have ran memory diagnostic test and hard drive test can no problem has been found. Btw windows boots normally when I removes atikmpag.sys, I have attached a error dump file.
View 5 Replies
I get the BSOD when restarting my machine (which I rarely do). It kicks in several seconds after my desktop comes up. After it restarts, it's usually fine (although sometimes it hits a second BSOD). But, once it's up and stable, no more BSOD.
View 5 Replies View RelatedI've had a nightmare with my computer over the last week with various random crashes whilst play Rift. Now I am struggling to even get past the starting video for Skyrim as the game is freezing and crashing (with the dreaded BSOD). When I see the screen it mentions the atikmpag.sys error.
- Windows 7 x64
- Original OS installed on my PC.
- OEM version
- PC came pre-built and is 4 months old
- Intel Core i5 2500K Sandy Bridge Processor
- Asus P8P67 PRO Motherboard
- 4GB PC3-10666 DDR3 Memory
- Radeon HD 6870 1024MB Video Card
I have had this issue for a while but only recently did I realise that it has resulted in a BSOD, before I when the display had gone I had just rebooted the machine. However after leaving it for a minute or two it BSOD'd and I finally got to see an error to start debugging this problem!
This error occurs seemingly randomly when I am playing games on my EyeFinity setup (Three Monitors), sometimes I can play a game solidly for 5 hours with no problem. or I can start a game and get this error almost instantly. This has lead me to believe that it isn't an issue with a specific game as it happens with pretty much all of them.
The BSOD is STOP 0x00000116 atikmpag.sys
Attached is the dump from SF_Diagnostic_Tool (What an awesome idea).
And here is my system specs: Windows 7 x64 AMD Phenom II X6 1090T MSI 890FXA-GD70 Crucial Ballistix 4x2GB Radeon HD 5870 Asus Xonar DS 1TB Seagate 7200.12 OCZ 700W Thermaltake 2500RPMx2 HP 17" Monitors x3 (EyeFinity)
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6050 Mb
Graphics Card: Intel(R) HD Graphics Family, -1262 Mb
Hard Drives: C: Total - 699443 MB, Free - 332975 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled
I am convinced that my computer has been dishonored and is trying to commit Hari-Kari.This year-old Toshiba P755 came with Win 7 installed. This August after an automatic Windows Update it failed to startup properly. After logging in Explorer would freeze.I was able to start up in Safe Mode. Windows Update log showed that a half dozen updates had just been installed, and several had failed.I used Recovery and selected a restore point just before the update. All went OK and the computer now worked until the next time I shut down, whereupon it headed off to re-install the updates. This time I noticed it hung in the Installing Updates, do not turn off your computer" screen for many, many hours, eventually failing to install them.
I repeated this cycle three times over teh next few days, growing more desperate each time. Finally I found a kb on the MSDN site that sounded applicable. It had me download and install a "Mr. Fixit" utility. I did so, got one more lockup, then upon entering Safe Mode saw a new option: Repair Startup or some such. I tried it and lo, it worked. No more endless "Installing Updates" messages.I then changed the Windows Update mode to manual. It still sent me messages about updates being available, so I then turned off the Windows Update service.
All was quiet for three weeks. Then last Friday the same drill - hung after logging in. Only this time it has invented a more ominous way to die. I did the Safe Mode->Control Panel->Recovery drill (I can do it in my sleep now) and, uh-oh, it says I have no restore points! I used to have dozens....Looking at the update log, I only see three update that (I think) are when I installed Mr. Fixit. I went ahead and uninstalled them anyway. The computer wanted a reboot, and once again locked on the "configuring Updates" screen.Now I can only start up in Safe Mode with Networking, which is how I am able to write this.
1) With no restore points to choose, what next?
2) How do I keep this from happening again?
So I've gotten a BSOD twice and decided to use a diagnosing program to see why it was happening. It picked up that ntoskrnl.exe is causing the BSOD. Why is it happening? What do I do from here?
I attached the .dmp file.
I am getting BSODs because of that damn ntkrnlmp.exe.
View 9 Replies View RelatedI just built my girlfriend's PC a few days ago, all was well but now a BSOD appears randomly, so after using BlueScreenView on the dump files it all originates from one driver.The PC in questions specs are almost identical to my own (minus the 1TB HDD and her MOBO is the Rev 3.1 version of the same MOBO).
View 4 Replies View RelatedSo my system have BSOD'd 5 times today, after reformatting it last month due to multiple BSODing of the same nature. After examining what I've been doing on my system today, it appears that uTorrent may be the culprit, as it only seems to be happening when the application is open. This could be a coincidence though as the blue screens seems to happen sporadically.This is the error that pops up after I reboot.
Code: Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
[code].....
i have been gettings BSOD randomly for sometime, i thought i solved it before when updating the drivers for my GPU, but it seems to be back, so maybe it wasnt solved?.
i found a dump file, but not sure if its correct but it probably is, maybe you can find out something?
Q6600 CPU
5670 ATI GPU
Maximus Formula Asus MB
my Windows 7 Ultimate started bugging out of me a couple days ago. Problem first started right after an windows update I believe, and originally presented as no desktop loading after log on, only a black screen with a cursor. Restored, ran chkdsk and repair and they problem disappeared but now these unexpected crashes keep popping up. Have never actually seen the BSOD yet, computer is always rebooted when I come back to it.
View 1 Replies View RelatedQuote :System Information (local)
--------------------------------------------------------------------------------
computer name: ADMIN-PC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:Windows
CPU: GenuineIntel Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 8526381056 total
VM: 2147352576, free: 1928896512
[code]....
I've been getting a BSOD sometimes on start up or shortly after. I've used the debugger to check the dump file and the driver that would appear to be faulty is dtsoftbus01 which from what I read is daemon tools. I had daemon tools on this computer at one point in time but I've since reformatted my hard drive so daemon tools shouldn't still be installed.
View 3 Replies View RelatedSo I've been having random BSOD's for 10 day's now - They appear at complete random and I can't tell why, Each time they display 'Memory Management' - I can normally diagnose them and narrow it down, However I cannot seem to do so. Can an expert have a look at the dumps and see if they can work it out?
View 3 Replies View RelatedI then got a BSOD and my boot disk (an SSD) disappeared from the BIOS. I thought I was in big trouble. I have another controller so I plugged the SSD into the other one and booted to it and rolled back to the MS driver (just for the SATA controller). I then put everything back together.
Everything seems to work now. Do I need to take any further steps to prevent this from happening again? What happened?
My system get freezes everything and suddenly goes into BSOD stating Driver Power State Failure. I am attaching the mini dump along with the screen shots. With Bluescreen View i could find out that it caused by ntoskrnl.exe
View 1 Replies View RelatedMy computer with Windows 7 Home Edition x64 has been getting frequent BSOD as well as being super slow and unresponsive. I have attached a copy of the recent dump files hoping to find anything out as to why this is happening.
View 1 Replies View RelatedFor the past 3 weeks, I have been receiving blue screens serval times. Each time, the caused of the error reports has been "Wdf01000.sys" and address at ntoskrnl.exe+74a90.
View 1 Replies View RelatedI'm using an Alienware M17x R4 with an Nvidia GeForce GTX 660m.
I've been using this laptop for about 3 months now and everything has been running fine. Yesterday, I was playing Skyrim testing out a new mod from nexusmods. I've read on the description and comments and there were no problems associated with the mod. While I was using it a received a BSOD. When I restarted the computer my resolution was reset. I right clicked on the desktop and the options for my Nvidia control panel were gone along with the other options for the Intel Graphics control panel.
After a while my first display adapter came back which was the Intel(R) HD Graphics 4000. I looked up as much as I could about the problem and it was usually associated with the display adapters being reverted to something like Standard VGA Adapter. This applied to the Intel graphics, but that was all. It was as if my graphics card vanished and I can't find it under device manager. When I try installing/reinstalling the Nvidia drivers it says that there is no Nvidia hardware. I've tried waiting a couple of hours with the laptop shut down, finding it in safemode, and searched for even more solutions. I can't seemed to find any. The last thing I did was check the BIOS and it said that the Discrete Graphics Card was not detected.
BSOD at random times, Blue-Screen View said it was ntoskrnl.exe and win32k.sys that caused it
View 4 Replies View RelatedI installed amd new driver 12.2 for my Radeon HD 6970 graphic card last week. Right after I installed it, my system lockup and I got a blue screen
FFFFF8800B1519E0 atikmpag.sys (no mem dump)
After a few days of trying to fix this problem, I decide to reinstall windows 7 64bit.
All ok till I installed the drive again. Same story, reinstalled again but this time I updated all updates. System still crashed but with a different error. This time I got a mem dump. Can anyone till me what is going on??
AMD 8150
Asus Crosshair V motherboard
2x 8gb G.Skill Ripjaws x ram
XFX Radeon HD 6970
128 Corsair SSD
1000 Corsair power supply
Windows 7 64 bit SP-1
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedIm getting blue screen every 35min here is full report..from bluescreen view
Caused By Driver - ntoskrnl.exe, Caused By Address - ntoskrnl.exe+71f00
File Description - NT Kernel & System, File Version 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Full Path C:WindowsMinidump�20112-5850-01.dmp
Crash Address - ntoskrnl.exe+71f00
So I get this BSOD when my machine starts up, right after the BIOS/memory/harddrive screen. Can someone please tell me what this means?
(Sorry I cant get a dumpfile because I cant get past this and get the OS up.)
I hope I have done everything correctly as far as following the instructions to report my bsod problems. I've noctice it usually resets and bsod after I logged into windows? if it doesn't crash in the first few minutes upon entering windows then it seems my system would be stable for hours on end.
View 3 Replies View RelatedRecently I built a new pc and I've been getting random BSOD's while on startup or soon after my desktop loads and also during shutdown sometimes.Here's my recent crash info from WhoCrashed:
[code]...
Had to install in safe-mode. After install, my graphic card was recognized and the drivers started working! 64-bit is WAY faster than 32-bit...Or is it just 7600 being faster than 7100...
View 0 Replies View RelatedI attempted install of RC1 on a new hard drive and got as far
as "Completing Installation". System reboots and after logo goes
to black screen. No error codes.
Reboot and selected Safe Mode. Win 7 says "Can't complete installation
in Safe Mode".
Reboot, press F8, select Low Resolution. Same results. Black screen.
System configure:
Asus P5Q3 Deluxe Wifi
4 gb DDR3 memory
E8500 Intel Processor
EVGA Nvidia GeForce 9800GT with 512 mb ram
On board Marvel Lan
On board Ralink Wifi
On board sound
1 - 500 gb SATA II hard drive
1 - Sata DVD
This machine runs Windows Vista Business with absolutely no problems.
This machine runs Mac OS X 10.5.6 with Absolutely no problems.
This machine runs Windows 7 Build 7000 with absolutely no problems.
I use a different hard drive for each operating system and I have
a brand new drive that I'm using to install Win 7. The drive I'm
using to install Win 7 can run Win 7 Build 7000 perfectly.
I do a clean install attempt to install RC1 and I get above results.
I reinstalled Win 7 Build 7000 on the same drive and just before boot
it says "Checking Vidoe card performance", then reboots and Win 7,
Build 700 is installed.
On clean install of Win 7, Rc 1 it appears to get to the exact same pont
(although I don't see the message about testing performance), reboots,
and gives black screen.
I have been on a couple of board and the predominant them is BSOD's
at boot for machines running Nvidia graphics. It would appear that RC1 has fouled up the Nvidia drivers.
I can't get into Low Res mode to load the approved 9800gt drivers from
EVGA so I can't complete the installation.
I'm hoping someone from Microsoft sees this and comments.
Any other thoughts or suggestions would be welcomed.
This also happened to me (the BSODs) but not after installing RAM - I'm not sure what the error code was though, I upgraded my OS from Windows 2000 Professional to Windows 7 (I actually installed Windows 7 on a different partition) and didn't actually do an "upgrade" - but I wasn't sure if I should "uninstall" or delete the old Windows OS from the other partition. Not sure how to go about doing that - just by deleting, or having to clean registry keys, etc. I also had to install a new video card - since my previous one would not work right under Windows 7.
View 1 Replies View RelatedGetting this BSOD when starting it up in the morning. Afterwards the computer runs normally.I've tried to enable creating minidumps, but 3 days in (and 3 bsod's) it hasn't created one yet.I've copied info from the BSOD and Event Viewer below. Please let me know if any more info is needed.-Technical Information from the BSOD below: Code: *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA00E399B30, 0xFFFFFA800E399E10, 0xFFFFF80002F935F0)
View 9 Replies View Relatedi just recently started getting BSOD at windows startup, ive attached a Windows_NT6_BSOD_jcgriff2 file.
View 2 Replies View Related
