[DRIVERS] Atikmpag.sys Error
Mar 23, 2012
I installed amd new driver 12.2 for my Radeon HD 6970 graphic card last week. Right after I installed it, my system lockup and I got a blue screen
FFFFF8800B1519E0 atikmpag.sys (no mem dump)
After a few days of trying to fix this problem, I decide to reinstall windows 7 64bit.
All ok till I installed the drive again. Same story, reinstalled again but this time I updated all updates. System still crashed but with a different error. This time I got a mem dump. Can anyone till me what is going on??
AMD 8150
Asus Crosshair V motherboard
2x 8gb G.Skill Ripjaws x ram
XFX Radeon HD 6970
128 Corsair SSD
1000 Corsair power supply
Windows 7 64 bit SP-1
View 9 Replies
ADVERTISEMENT
Dec 24, 2012
yesterday I started expericing BSOD on startup with the following error message, I can boot system from safe mode; and i have ran memory diagnostic test and hard drive test can no problem has been found. Btw windows boots normally when I removes atikmpag.sys, I have attached a error dump file.
View 5 Replies
View Related
Nov 11, 2011
I've had a nightmare with my computer over the last week with various random crashes whilst play Rift. Now I am struggling to even get past the starting video for Skyrim as the game is freezing and crashing (with the dreaded BSOD). When I see the screen it mentions the atikmpag.sys error.
- Windows 7 x64
- Original OS installed on my PC.
- OEM version
- PC came pre-built and is 4 months old
- Intel Core i5 2500K Sandy Bridge Processor
- Asus P8P67 PRO Motherboard
- 4GB PC3-10666 DDR3 Memory
- Radeon HD 6870 1024MB Video Card
View 4 Replies
View Related
Sep 2, 2012
I have had this issue for a while but only recently did I realise that it has resulted in a BSOD, before I when the display had gone I had just rebooted the machine. However after leaving it for a minute or two it BSOD'd and I finally got to see an error to start debugging this problem!
This error occurs seemingly randomly when I am playing games on my EyeFinity setup (Three Monitors), sometimes I can play a game solidly for 5 hours with no problem. or I can start a game and get this error almost instantly. This has lead me to believe that it isn't an issue with a specific game as it happens with pretty much all of them.
The BSOD is STOP 0x00000116 atikmpag.sys
Attached is the dump from SF_Diagnostic_Tool (What an awesome idea).
And here is my system specs: Windows 7 x64 AMD Phenom II X6 1090T MSI 890FXA-GD70 Crucial Ballistix 4x2GB Radeon HD 5870 Asus Xonar DS 1TB Seagate 7200.12 OCZ 700W Thermaltake 2500RPMx2 HP 17" Monitors x3 (EyeFinity)
View 9 Replies
View Related
Aug 16, 2009
Anyone know what to do about this or why i'm getting it, In a pop up box when I try to open CCC
could not load file or assembly 'MOM.implemention, Version 2.0.3470.20910, Culture= neutral,PublicKey Token=90ba70f846762e' or one of its dependencies. The module was expected to contain an assemby manifest.
http://www.dailyanswers.com
View 9 Replies
View Related
Jun 8, 2012
I couldn't find anything wrong specificlly and I the file wasn't something I could open so I had to copy and paste it so sorry if it's hard to read.
Catalyst� Install Manager
Installation Report
06/08/12 18:04:58
Hardware information
NameATI Radeon HD 3200 Graphics
[code]....
View 1 Replies
View Related
Jul 26, 2010
When I try to install windows 7 64 bit on my newly-built computer, it gives me the cd/dvd drivers are missing error.I've tried everything that other people have suggested but to no avail.
-Downloaded the .iso file from the engineering department at my school. (Yay for free, legit software!)
-Tried burning two separate disks using imgburn so I thought it was just a bad burn but when I made a bootable usb, the same error occurred.
-Inserting DVD's drivers disk did not work.
-Tried booting without my usb keyboard plugged in.
-The boot device priority is in the correct order.
-DVD drive is in AHCI and USB is set to forced FDD
I am guessing one of two things:
1)Bad download of the .iso file (although Windows 7 32 bit worked perfectly on my laptop)
2)Bios needs to be updated
Specs:
Amd Phenom II 965 BE
Asus M4A88TD-V
G-Skill Ripjaw series 4 Gb DDR3 1600
Corsair 750W psu
WD Caviar Black 640 Gb
Lite-On iHas324-98
Cooler Master Centurion 534 case
View 9 Replies
View Related
Aug 31, 2011
the message appears when loading Dark Star 1
View 6 Replies
View Related
Dec 4, 2009
while trying to update network adapter drivers on my gf's pc i had an error.
now i cant get it online.
ive tried using asus latest driver but it fails.
ive also tried a few older drivers.
but says not compatable with win 7
if i do a win 7 repair. will it reinstall the network adapter.
or do i need to do a full format?
View 4 Replies
View Related
May 9, 2009
I go to install the drivers and i reboot, yes i did everything correctly. even tryed vista drivers. I try to open up ATI control panel which is showing that its there and i get an error message. I goto the directx tool and its showing nothing for my display. which is very odd? It shows my card in device manager. Somehow i think my card and the drivers are not connecting. Ive tried to clean install the drivers probably 10 different times and nothing has worked.
View 9 Replies
View Related
Jun 18, 2009
"No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"
I Ve been trying to install Windows 7 RC on my Sony Vaio VGN 123 E and i managed to get my DVD fully working (booting windows 7 installation and all), but the las issue im having installing Windows 7 is that eveyrtime i get into the Install now screen, and i click on install now, it goes and show me a screen with this message:
No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok.
That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse i have tried to find those missing drivers but without succeed.
I have read almost every near installation post on this forum and googled that error with no further
FYI:Vista Home Premium already Installed on Laptop. DVD/RW rom is working perfect and window7 does boot perfectly then why the hell it needs drivers again? I do not have drivers for Cd/dvd rom.
View 9 Replies
View Related
Feb 7, 2013
I got a start up error no device drivers found.
View 5 Replies
View Related
Mar 9, 2012
I tried to upgrade my graphics card a AMD Radeon 6650M an Acer 5552G, but appeared to me this strange screen: (Photo below).
View 4 Replies
View Related
Jun 5, 2011
i have sony vaio laptop with windows 7 home edition now i want to install windows 7 pro in my laptop.i have the ISO of win pro, because my CD drive not working i m trying to install from the USB .. windows setup started but it shows error when i click "Install Now""No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse.
View 1 Replies
View Related
Jul 24, 2009
When I am trying to install windows 7 It loads files / then when it reboots i get the windows boot manager saying
insert drivers disc if you do not have this contact xxx
windows.~bt/windows system32/drivers/vmstorfl.sys
status 0xc0000231
windows failed to load critical system driver missing or corrupt
I thought i may have been a bad copy . 3 different copy`s burned with different speeds/discs/ pc still getting error
I also tried to load vista and loads file and reboots
get a blue screen
abit nf7s 2.0
amd socket a 2600
2.5 gigs ram
ATI 9600 128meg agp series vidio
latest bios updated /
View 0 Replies
View Related
Jan 15, 2013
I recently went to update my mobile video card drivers on my ASUS G73JH laptop and after doing so, on boot up I would see this error message after saying my CCC.exe has crashed...I also couldn't access any programs that make use of the video card, every time I would open one, it would crash before opening.So I rolled back my drivers and everything is fine, but obviously, I would like to update my drivers for my video card, but not really sure what to try.
View 1 Replies
View Related
Jun 17, 2012
With my motherboard (asrock n68c-gs) i need to install the windows 7 VIA audio drivers. After doing so, the "No audio output device is installed" error disappears and I can access the volume icon. Upon reboot though, once I login I get the "C:...Desktop refers to a location that is unavailable" error. Now this error ONLY occurs when I install an audio driver that fixes the audio output device error. It also hapened when I installed the realtek 3d blah blah driver, which also fixed the error, but not when I installed the realtek HD audio driver, which didn't fix the problem. The problem IS the correct driver installation, which has to be the most retarded issue I've experienced in the last decade.
I've had to use a restore point every time just to get the desktop back. I've tried solutions such as looking in the location where it says the desktop is unavailable, and also checked regedit User Shell Folders. The registry entries pointed to C:Users(my profile). Checking it now it gives a variable %USERPROFILE%.
View 6 Replies
View Related
Sep 28, 2011
[code] So I get the Comp built, and did not have a windows iso yet, so I put Ubuntu 11.04 on it. When I tried to put on Windows 7 64-bit, via live USB, I get to the Install Windows button (very early in the process), before it gives me the error LOAD DRIVER: No device drivers were found. Make Sure the installation media contains the correct drivers, and then click OK.So I can browse for drivers, and I have downloaded the Windows drivers for the Sata and AMD 970 chipset from Gigabyte, but the install windows screen does not pick them up. I hit browse and then find the folder i saved them in and hit ok, yet it finds nothing.My bios have been changed from AHCI to IDE with no luck.
View 1 Replies
View Related
Oct 9, 2012
I was doing some printing and it was fine. Right in the middle of a multiple page print job I got a printer error. Troubleshooter indicted a HP Photosmart C310 driver was missing. I went to Device Manager and every entry under Other Devices was missing their drivers. The C310 printer, the SM Bus Controller and the Ethernet Controller. Windows Update was unable to find and install any drivers. Why all the Other Device components lost their drivers at the same time?
View 3 Replies
View Related
Dec 27, 2009
I am having trouble in installing the printer (Xerox Phaser 3117) driver on my Windows 7 x64 version. It is giving an error "Windows policy is blocking NT 4.0 drivers".
I have never used Windows NT before.
I have tried changing the disallow kernel mode drivers to install to disable but still has not worked for me. I badly need to run my printer.
View 0 Replies
View Related
Sep 14, 2012
as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
View 1 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Nov 15, 2011
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
View 2 Replies
View Related
Mar 12, 2011
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies
View Related
Mar 7, 2012
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
View 1 Replies
View Related
Dec 1, 2011
Recently whenever I've used an .exe installer I'll get an error as soon as I click start after choosing the directory, in the picture example I include below, it's of SA-MP, but it happens with any installer I try and use. Installers have worked previously, it's only recently it's stopped working.The error is;Error opening files for writing?
What I've tried;
-Full system scan with Comodo AV.
-Revealed hidden files and folders.
-Run the installer in both compatability (Even though it does work on Windows 7, and as an Administrator).
-Also done the scan on CMD (can't remember exact command).
Brief Info:
OS: Windows 7 Home Premium 64bit.
View 9 Replies
View Related
Jun 19, 2011
I am trying to run a certain program and it worked previously for a few days, and then today all of the sudden its giving me this error.Is this a windows thing I can try and fix? Or is it program specific (this program doesnt have much support unfortunately)
View 3 Replies
View Related
Dec 17, 2011
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies
View Related
Jun 4, 2011
How can I fix the run-time 75 error - path/file access error in windows 7?
View 1 Replies
View Related
Dec 21, 2011
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
View 14 Replies
View Related
Apr 5, 2011
I have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
View 11 Replies
View Related