Setting Smaller System Font When Windows 7 Tools Don't Go Small Enough
Dec 2, 2010
Can anyone tell how or if its possible to change the system font to a smaller size than is available at: Control panel / Appearance and Personalization / display..I got a big new monitor where Windows 7 windows now display with a larger font than I need for visibility.I've set the radio button for small and even under Custom DPI setting.It will not let me set anything under 100%.It now shows: 9 point Segoe UI at 96 pixels per inch.I'd probably like 8 point or even 7 point.So, is there anyway to make the fonts smaller beyond those settings
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD A4-3420 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0 Processor Count: 2 RAM: 3570 Mb Graphics Card: AMD Radeon HD 6410D Graphics, 512 Mb Hard Drives: C: Total - 936682 MB, Free - 884422 MB; D: Total - 17083 MB, Free - 2133 MB; Motherboard: PEGATRON CORPORATION, 2ACF Antivirus: Kaspersky Internet Security, Updated and Enabled
When using Word to print return mailing labels on Avery 8167 sheets, the font cannot be reduced to fit the label.
Twice now I have "done" 'adjust clear type text' to improve legibility of font in parts of Google Earth and Chrome. But THAT text is hard to read AGAIN, suggesting that the 'clear type text' setting does not survive rebooting. How to fix in Win7 Ultimate ?
I have 2 lenovo h320 desktop running 7 pro 64 and a dell laptop running 7 pro 32. I have a seagate blackarmor 220 nas as well as a netgear srxn3205 wireless vpn firewall router. My first issue is setting up homegroup. I can create one on any pc and see it to join on the other 2 but when I enter the password it tells me I have a network problem. I can ping each pc's ip address from the others. I have checked all the typical fixes, ipv6 enabled...
Secondly, I need understanding the network layout and how the NAS plays a role in the mapping. When I map the network it shows the 3 pcs all connected to the router and to the internet but it shows the NAS as other devices at the bottom. I have mapped a few folders from the NAS to each pc and can see as well as use them but not sure why it is not part of the map.
I have a duplicate image of my windows 7 system. I want to move my windows 7 system off from my 2TB drive on to a smaller 500GB drive instead. I used an imaging program to duplicate the drive contents onto the 500GB drive. My question now is, is it safe to switch to my 500GB as my primary drive and boot up from it without affecting my Windows 7 activation status, or do I need to de-activate it first on the 2TB drive then re-activate on the 500GB drive?
Whenever I try to open any browser except IE (Mozilla/Chrome/Opera) or even any Windows System Tools like msconfig, cmd, system information or even System Restore, an alert box is popped up saying :
'The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program'
I have tried all the antivirus and malware removal tools available and the problem remains. I don't want to reinstall my windows!
After Microsoft updates my system font is now looking like 'graphics'. It is only circles, different kind lines, cubes, corners, triangles, x-marks and so on. Win7 works alright but it is almost imposiible to use that because Internet explorer has also changed it's font unredable.
I have a problem with my uncle`s computer.. Recently, he was watching Netflix, and lost his internet connection, he said that his computer`s performance was slower than usual. I came over and checked his computer`s status, ran MalewareBytes, I found two items.. However, don`t think that this is the cause of the problem. It`s seems as if he cannot access parts of his computer, such as: Microsoft Management Counsel, Microsoft System Restore, etc. I cannot access the C: drive, or D: drive. They`re currently blank and do not allow access when clicked on. I would be more than happy to restore, but I can not use this option since there isn`t access to it. I cannot install Anti-Virus software, or uninstall programs, since there is no access to C.
How do I change font to Black? The fonts on all the Windows 7 windows, titles, information screens, are all some kind of washed out blue or gray. Almost impossible to read! How do I get just plain Black text?
I suddenly started seeing this ugly font (see images below) on many webpages.I think this issue began right around the time I installed some other fonts, but I am not sure. Initially, I figured it was a Chrome thing but have since confirmed the issue extends to IE and Firefox, leading me to believe this is a Windows issue. By the time I tried to revert the changes via System Restore, it was too late (restore only went back a few days; maybe I need to adjust settings there?).I tried to reset the default font but Windows does not seem to respond to that. When I click "Restore to default font settings" the button greys out but nothing else happens. No dialog box and no change in the issue.
I deleted a few fonts from my font folder the other day and it seems that a few OS fonts were deleted in the process. Usually Ive got a message saying something along the lines of "this is a OS font" or "in use".Question:I noticed that my default calculator font is missing and was curious if anyone knows what font the calculator uses. I got a substituted font from the deleted one, but it looks terrible.If nobody knows the above.I went into a font deletion frenzy because I had some non-OS fonts that made my font list bulky and it took a while to scroll to the more used fonts.So I deleted some to combat this. Photoshop loads a lot faster as well due to less fonts(my little takeaway tip from all this)
I deleted a few fonts from my font folder the other day and it seems that a few OS fonts were deleted in the process. Usually Ive got a message saying something along the lines of "this is a OS font" or "in use".
Question:
I noticed that my default calculator font is missing and was curious if anyone knows what font the calculator uses. I got a substituted font from the deleted one, but it looks terrible.
If nobody knows the above. Then would anyone happen to know how to change the calculator font?
I went into a font deletion frenzy because I had some non-OS fonts that made my font list bulky and it took a while to scroll to the more used fonts. So I deleted some to combat this. Photoshop loads a lot faster as well due to less fonts(my little takeaway tip from all this).
I am looking for a small cloud based system that would allow the following activities:Finances (Buy Price, Sell Price, Profit etc..) Notes Section for people to share their thoughts Plus and other features that may be possible.I don't mind if it is hosted on a secure site or hosted on a server at someones home and made available to others (Would need making secure somehow).
I'm a newcomer to the forums, but I've been having a problem that's been plaguing me for a long time. Whenever I am transferring a large number of small files of maybe when I am installing a game, for example, my system starts hiccuping and fulfilling simply tasks such as opening Microsoft Word take a lot longer. The processor usage remains pretty low, and it hardly uses more than 50% of my available memory.I have bought two 1TB Seagate HD's two days ago and mounted them under RAID0, for I was considering the problem was a faulty HD. The performance of the RAID is where it should be according to HT TACH, but today after installing Armed Assault 2 the same problem happened again.My system is overclocked to 3.7GHz, and I've tried running everything under vanilla BIOS configuration and the problem still persisted
I have been applying different visual styles to my machine, and I recently applied one that had a small font, which I didn't really like.. So I deleted that font from my system fonts, and then reapplied the theme (I really like the theme, except for the font used). However, now I can't view some dialogs, like the windows sounds dialog for example, as you can see in the attached screenshot below. I imagine that somewhere in the visual style, the size of the font is enlarged, so as the accomodate the supplied, smaller, font. I don't know how to change it back.. I've tried applying different visual styles, and even the default visual style (through the Personalize dialog).Does anyone know how I can change the font back to the original size? [code]
i have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
I have Windows 7 64bit and I am trying to set the system up to not automatically restart if it crashes and when it crashes to write a mini dump file. However after I deselect restart automatically and select mini dump and click ok and exit, I see that all settings are reverted to default settings.
My ISP lmits my download to almost nothing, except for three hours in the early morning. I have a monitor in my notification area that tells how many MB I have left (this is from the ISP), and during the day with nothing running my MB slowly drops. I installed NetBalancer, to see where all the download was going, and all I can find downloading is Windows Update, and System Resources. At least for the most part that is.So my question is, Is there any way to limit Windows Update, and other Windows Systems to downloading only during those three hours? I have Windows Update setting set to only Install at 4:00am. But it still downloads during the day. So is there any thing I can do, a reg edit, or something?
i have a hp mini which original came with xp professional, but it got corrupted. i tried doing a repair using my xp cd, but that did not work just keep getting an error. so to save time i when ahead and did a new installation windows 7 ultimate, and its working fine. the only problem is that the old Os (xp professional) is still showing up in the windows boot manager menu and is only defaulting to the xp.in fact three choices are showing up in the windows boot manager, which are 1)Earlier Version of Windows 2)Windows 7 3)Microsoft Windows Xp Professional Setup..what can i do so that only windows 7 is showing up in the boot manager? the other two are not working.
So i installed windows 8 transformation pack, and then window update to service pack 1 now my volumn network action center etc cannot be accessed. Sorry for crappy grammar, typing this from an ipad as i am currently restoring back.
Uh, i tried the solution of group policy editing and got a error message with three choice about mmc. i tried sfc scan and it get disrupted at 14 percent and said that the scan cannot be completed. I tried deleting hideScanetwork and rebooted but it doesnt work. I tried editing the dword 00000000 for hidesca but it doesnt work.
I am the sole owner and user of my laptop. When I first set it up, I established 3 'User Accounts' in the Control panel. One account - the one I would be using most frequently - I set up with 'System Administrator' privileges. The other 2 accounts are for guests, and do not have 'SysAdmin' privileges. My problem is that fairly often, I get a pop-up box that says "You require System Administrator privileges to perform this action." This happens when I am trying to make room on my remote HDD by deleting an old backup. It seems that the operating system does not recognize my 'account' - or any other account for that matter - as having "System Administrator" privileges. How can I correct this problem? Using Win7-Home Premium on an HP dv7 laptop.
I recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.
I was trying to recover/reinstall win 7 and bring back my asus laptop to its manufacture state. When I run the recovery media (recovery dvd) that comes with my asus laptop and after answering the prompts, it gives off "missing operating system" message on an entirely black screen. I tried to go to the bios setting by hitting delete key upon boot-up but it does not respond. I switched off and back on several times trying the delete key every time but to no avail. It's an ASUS N61J Series with intel i7.
I want to install my windows 7,office,photoshop,drivers and some other software on my HDD and then save everything in a separate partition of my disk so that if I want to restore my system to the point where I have everything installed and running I can boot from the disk partitions and get it all done.Pretty much what laptops do with the system restore function on boot without needing a working OS.Simply a boot that will get my windows 7,office,photoshop,drivers and some other software installed again.Laptops have this function and I would like to have it on my desktop.
I want to install my windows 7,office,photoshop,drivers and some other software on my HDD and then save everything in a separate partition of my disk so that if I want to restore my system to the point where I have everything installed and running I can boot from the disk partitions and get it all done.
Pretty much what laptops do with the system restore function on boot without needing a working OS. Simply a boot that will get my windows 7,office,photoshop,drivers and some other software installed again. Laptops have this function and I would like to have it on my desktop.
I have a 5900 RPM 1T Hard drive currently running my O.S and a few other programs, but it has gotten to the point where I would like to speed up the boot time and running certain applications. I wam looking at getting a SSD that at most will have 124GB of storrage space. I tried ghosting one hard drive to a smaller faster hard drive on my laptop so I know that it won't work but I have heard some people talking that their is a way to make the computer think that all the free space on the hard drive is gone and the hard drive is only as big as how much space is actually taken up.
I backup my files using windows backup to an external hard disk. But the backup size is smaller than the selected files. The files that are selected to be backed up are 30-40 GB, and the size of the backup shows it is only 3.7 GB. Why is this. It says its 3.7 both in the control panel for windows backup, and when looking at properties on the backup folder.
I have Windows 7 os and an Epson Stylus SX415.I can print perfectly in A4, but when I try to print a page smaller than A4 ie: A5, A6 and labels, the printed area does not fit the paper properly - it is too big.And 'shrink to fit' does not work to make it fit the page. I have tried running MS troubleshooter, updating the latest drivers, uninstalling and reinstalling software and driver.