Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3420 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3570 Mb
Graphics Card: AMD Radeon HD 6410D Graphics, 512 Mb
Hard Drives: C: Total - 936682 MB, Free - 884422 MB; D: Total - 17083 MB, Free - 2133 MB;
Motherboard: PEGATRON CORPORATION, 2ACF
Antivirus: Kaspersky Internet Security, Updated and Enabled
When using Word to print return mailing labels on Avery 8167 sheets, the font cannot be reduced to fit the label.
Twice now I have "done" 'adjust clear type text' to improve legibility of font in parts of Google Earth and Chrome. But THAT text is hard to read AGAIN, suggesting that the 'clear type text' setting does not survive rebooting. How to fix in Win7 Ultimate ?
Can anyone tell how or if its possible to change the system font to a smaller size than is available at: Control panel / Appearance and Personalization / display..I got a big new monitor where Windows 7 windows now display with a larger font than I need for visibility.I've set the radio button for small and even under Custom DPI setting.It will not let me set anything under 100%.It now shows: 9 point Segoe UI at 96 pixels per inch.I'd probably like 8 point or even 7 point.So, is there anyway to make the fonts smaller beyond those settings
I suddenly started seeing this ugly font (see images below) on many webpages.I think this issue began right around the time I installed some other fonts, but I am not sure. Initially, I figured it was a Chrome thing but have since confirmed the issue extends to IE and Firefox, leading me to believe this is a Windows issue. By the time I tried to revert the changes via System Restore, it was too late (restore only went back a few days; maybe I need to adjust settings there?).I tried to reset the default font but Windows does not seem to respond to that. When I click "Restore to default font settings" the button greys out but nothing else happens. No dialog box and no change in the issue.
I deleted a few fonts from my font folder the other day and it seems that a few OS fonts were deleted in the process. Usually Ive got a message saying something along the lines of "this is a OS font" or "in use".Question:I noticed that my default calculator font is missing and was curious if anyone knows what font the calculator uses. I got a substituted font from the deleted one, but it looks terrible.If nobody knows the above.I went into a font deletion frenzy because I had some non-OS fonts that made my font list bulky and it took a while to scroll to the more used fonts.So I deleted some to combat this. Photoshop loads a lot faster as well due to less fonts(my little takeaway tip from all this)
I deleted a few fonts from my font folder the other day and it seems that a few OS fonts were deleted in the process. Usually Ive got a message saying something along the lines of "this is a OS font" or "in use".
Question:
I noticed that my default calculator font is missing and was curious if anyone knows what font the calculator uses. I got a substituted font from the deleted one, but it looks terrible.
If nobody knows the above. Then would anyone happen to know how to change the calculator font?
I went into a font deletion frenzy because I had some non-OS fonts that made my font list bulky and it took a while to scroll to the more used fonts. So I deleted some to combat this. Photoshop loads a lot faster as well due to less fonts(my little takeaway tip from all this).
On laptop computers the Windows certificate of authenticity is printed on a piece of paper which is attached to the bottom of the device. Unfortunately, the license key gets damaged and you cannot read it.Is there some way to overcome this problem? Is there some kind of laminate plastic that can be used to cover the paper
I purchased a LITEON DVD 8X Burner , with lightScribe technology but it did not come with any instructions on how to actually make a label using the DVD burner
I'm running Win7 Home Premium (64-bit)I recently installed [b]Audio Label [/b]software, a CD/DVD label maker, jewel case inserts etc It installed without any problem but whenever I start up Audio Label, I get a small window popping up showing: [b]'Error 557'[/b] with an OK button.When I click on OK, the window disappears, Audio Label opens and can be used fully.However, I'm finding it niggling to have that Error 557 everytime and I believe it's because of a missing 'dll' file, but which exactly?Why on earth give such info if you don't show a person how to 'fix' it or at least direct him in some way. OK is NOT OK!
I want to be able to clear some of the tag suggestions from the automatic explorer list.Eg:When tagging photos and you mistype a tag (e.g., you meant to type "Mom", but instead you typed "Nom" or something like that). Even if you delete the tag on the file, the tag still shows up in this suggested list of tags in the Info Pane's tag edit box. So, whenever you go to tag a photo the auto-suggest list shows "Nom" with the other recently used tags.I found this for vista but the label assignment file isnt under photogallery How to clear tag suggestions - Windows Live Photo & Video Blog - Site Home - MSDN Blogs
I have been trying to format a partition I created on my harddrive for my laptop. I booted from a disk into a program called GParted (live CD version). I used this to format the partition I created. Then, once I had finished attempting this task, my lack of expertise in computing took it's toll. I chose the option to create a disk label on the partition. I mistook this operation for something innocuous. It gave me a warning of some sort, which I ignored since I didn't think would be a problem since the recently formatted partition would be empty. This operation took a few seconds (30 or so) and once completed the drive map above said 685 GB unallocated space (or the size of my entire hard drive). I was very scared at this point so I restarted my comp and booted to hard drive and all I get is a blank screen and a mockingly blinking cursor. Now I am trying to see what my factory recovery disk can do for me. Using the windows recovery console I have attempted to repair this. Looking at the details, it runs a few tests. then sees that there is no valid partition, and tries to repair the partition. I restart and nothing has changed. Reattempting the repair just does the same thing and doesn't have any visible affect. Although it looked bad at this point there is some good news. In the recovery console I have attempted to load drivers from the other recovery disk. When the window opens to browse the disk I am able to navigate to the other drives (that I thought were gone) and it seems that all my system and personal files are still intact. I rebooted into GParted and it seems that the original hard drive is visible again and intact. However, I still can't boot!
I do have one option that is unnattractive to me. I have considered reinstalling windows to the partition I created, then once in the OS I could backup all my files to an external device, then redo everything from scratch. However, I am concerned that in the process of installing Windows 7 that I might everything for real. Maybe someone could affirm or repair my paranoia about this? However, I don't want to do this because I have been setting up this laptop for the last 2 weeks and I really don't want to spend the next 2 weeks doing it all over again (although it wouldn't be so bad if i could recover all my downloads and personal files).
I am trying to print a disc label on a dvd ,my printer is a Epson stylus photo Px650 .I have the software for the job but when I drag the into the software it says "this is not a epson cd print file.but I have printed dvd labels before with no problems but I can't remember if it was with XP but I am using windows 7 now .The I want to print is a jpeg is there a way to change it to an epson print file? and if so ,how do I do it?
Where do I find the label type or size that Access is currently using? I was given an Access database for a club's membership in order to print out membership cards. But the cards print just a little larger than I want.How do I change the label/card type? Everything I read uses the Label Wizard which takes me through all the steps to set up a label. However I don't want to have to go through selecting fonts, colors, etc as all this data is already correct. I just want to find a screen that shows the existing Avery label number so I can just change or customize that.Put another way, if I did not have any labels, where would I find the Avery label number that the database already uses so that I could order the correct type?
I guess that almost says it all, except when I attempted to clarify this in an edit, I suspect what I am trying to do is a document merge with fields I would need to create on the document that has the labels, one file has all the data and the other has a layout of six labels.I have a custom label sheet (8.5" x 11" paper, 2 rows, 3 columns with margins) that I wish to use in a merge for name tags. The sheet is NOT printed, so I am not feeding it through a printer for the merge, I wish to do the merge on the computer and send the completed label merge file to a printer at a later date. Part of the reason for this is that I do not have a color printer here and the label picture itself uses color.Where it gets a little more complicated is that though each of the six labels per page is the same, it is a picture (when I double click any one of them the "Picture" ribbon comes up).
How can I recover the Windows 7 key if the hard disk has broken (I have changed it) AND I cannot see the Windows key label on the back of the laptop because it isn't there (there's a linux label instead)?, of course my doubt is whether Windows or Linux was the original OS. If Windows 7 was the original OS and is thus an OEM version, can I contact Microsoft and ask them and give them the serial number or product number of the netbook?
I need to install a font thats missing from W7, so I go to Google and get Microsofts answer. Go to Control Panel, click on appearance and open the Font section, then click on "File" and choose "Install a Font". However, as is typical to 40% of their instructions, its not there. There is no " Install a Font" theres everything else however, adjusting, gazing at, painting, thinking about, wondering about or even sleeping with fonts, but there is no "Install a Font" I'm sorry, but I get so annoyed with having to take my time to try to correct something and taking the time to try to find the answers and having to bother someone like you in the 'forum' to find an answer that should be there. It's just so typical of MS and I go back to DOS. So, I apologize to you, educated forum reader, that you have to waste your valuable brain power and tell me how to do this simple thing which a ten year old working somewhere at MS should be able to get correct bullet proof instructions so that a simpleton like myself can actually do it.
I've formatted my laptop a few days ago and thought that some fonts in some websites looked weird compared to before, I thought I was just being paranoid and that it was my imagination, but after a few days where I couldn't stop to think that, I took a printscreen in the other pc on the house and comparing side to side to mine it as clear as day that it's different On the left it's how mine is, on the right how the other PC is(and how it was before in mine). All I did was formatting and installing most of the programs that was installed before on the laptop, I didn't tweaked the fonts or anything. Oh, also this is not specific to a browser, the font on internet explorer or firefox looks exactly the same. I tried resetting to default and checked that the font used is Segoe UI size 9.
have a Samsung NP-QX411 Laptop running Windows 7 Home Premium 64-bit. About two days ago or so some of my dialogs started missing text. (See attached images.)It's not just Windows related dialogs that are missing text. Some of my programs, such as Team Viewer and Advanced System Care, are also missing text while others such as Malwarebytes are not. Also, some Windows dialogs such as Task Manager and System restore are missing text but others such as Device manager are not.I have tried updating all my display drivers directly from the Samsung website but nothing seems to be working. I want to try a system restore but, as you can see in my posted image, I cannot even run System Restore because there is no text for me to see what I am doing. I am normally really good at fixing computers
I have windows 7, Hotmail, Internet Explorer.When typing in a new email message on say font size 12, after typing the 3rd or 4th lines, the next line font size decreases to 10. How can I stop this happening.
So my Windows looks absolutely normal, except in SOME programs I have a bold font problem that I can't get rid of. I've seem to have tried all the fixes that other people have posted on the web but I cannot fix this. Programs like Ventrilo have this problem, but no where in Windows does this problem exist. url... That is what my Ventrilo looks like. I've only seen this so far in this program and Valve Hammer Editor. url...
This chinese font looks awful in english and more awful in russian:Teamviewer in not the only program that uses this font. I know it can be changed as there is another font in these lines on the other computers.Changing default language for non-Unicode programs does not help.
when I copied over fonts to the windows fonts and told it to replace the current font it didn't do what I wanted. For example I copied over a font with the name HS.ttf, and when I now look at the corresponding font it is called HS_1.ttf. I have a certain program that looks in the WindowsFonts folder for a font called HS.ttf and it currently can't find that file. I thought no big deal I'll just rename HS_1.ttf to HS.ttf. That's where I have a problem, when I try to do that it gives me the error 'Cannot rename HS_1: A file with the name you specified already exists. Specify a different file name.' When I do a search for a file called HS.ttf it can't be found anywhere. How do I go about finding and removing this HS.ttf and renaming my HS_1.ttf file so that my program can correctly find the font file I want it to?
Because my laptop is in FullHD res in 16inch i was forced to set font reescaling in my Win 7 64b if i wouldnt get blind :P
But i discover that if I set font reescaling to 150%, all programs which run in 32 bits mode looks like in Low res with very poor image quality. By the way if i disable font rescaling for the program (by going on properties and compatibility mode) it works and looks fine...
I installed Windows 7 64 bit a few days ago and used a BFG Nvidia 7950GT because I hadn't bought a new video card yet. The fonts looked great and were similar to the ClearType font that I was used to in Windows XP. I then upgraded to a BFG Nvidia 285 gtx yesterday and now the fonts are jagged, even with ClearType enabled.
This is driving me crazy. Anyone have a fix? I've tried unchecking and then checking the cleartype setting and I do see a difference in the font, but it isn't as good as before.
I've googled a bit at work and from what I read it's not standard in the Outlook Admin Templates.I've seen posts about ways to do it via reg key imports and such via GPO and I'll be able to research this some more next week...but if somebody here already knows how to do it, you might save me some research time at work. I'm just tied up with other projects right now..so I don't have time to do the research.In a nutshell, we want to set the default font for about 350 desktops via a GPO that will work in both Outlook 2007/2010.It's not necessary to prohibit them from changing the font, but all new messages will default back to the default font that is being deemed as the standard.
Here's how to disable the font renderer which delays playing a dvd while rebuilding the font cache when you use the latest versions of VLC.http:[url]....
how can i add a font to the program? the one i want to use is not included. idownloaded the right one, installed it on the computer, so it works in otherprograms, but it's not showing up in dvd maker.
