Where To Find Label Type Or Size That Access Is Currently Using

Jul 19, 2011

Where do I find the label type or size that Access is currently using? I was given an Access database for a club's membership in order to print out membership cards. But the cards print just a little larger than I want.How do I change the label/card type? Everything I read uses the Label Wizard which takes me through all the steps to set up a label. However I don't want to have to go through selecting fonts, colors, etc as all this data is already correct. I just want to find a screen that shows the existing Avery label number so I can just change or customize that.Put another way, if I did not have any labels, where would I find the Avery label number that the database already uses so that I could order the correct type?

View 4 Replies


ADVERTISEMENT

How To Find Type Of RAM Memory

Nov 3, 2012

How to find type of my RAM memory? Processor is i7

View 1 Replies View Related

How To Find Packard Bell Laptop Type

Oct 13, 2011

how do find my packard bell laptop type?

View 1 Replies View Related

Windows 7 Can Not Find A Driver For That Type Of Camera

Aug 19, 2012

I tried to find a driver for my web camera canyon. the page you are asking me to write my web camera model, but the camera is only these symbols: CANYON Web Camera F / # 2.0 the problem is that my windows 7 can not find a driver for that type of camera.

View 1 Replies View Related

How To Find What Type Of Windows Memory Diagnostics Test Done

Jul 31, 2012

How to find out what type of Windows memory diagnostics test was chosen. I know that the results are psoted in windows event log but I don't know which number or line corresponds to what type of test was used (standard , default or extended). I don't remember what type I've chosen and I really would like to know how to determine it by files in event log.

View 6 Replies View Related

Damaged Laptop Need To Access Without Being Able To Type Password

Aug 11, 2012

I recently spilled coffee on the key board of my Dell Inspiron 1545 Laptop and believe it shorted the keyboard. I have a new laptop I would like to migrate over the docs and pics I have on that laptop to, but I can't get past the Windows 7 password stage because my keys that I need to use to type it don't work.Does anyone have any suggestions on how I can reset my password or log in without a password? My mouse still works, so if I can get in, I will have no problems. Also, I tried connecting a USB keyboard and for some reason the keys don't work on that either. IE) both the laptop and the usb keyboard only have the backspace, and space bar that work.

View 6 Replies View Related

Can't Access A Networked Computer Using The Network Name - Must Type Ip Address?

Oct 21, 2011

i have 3 computers - a laptop (vista wireless), a home theater pc (win 7 wireless) and my main computer (win 7 wired) with all my media files.i have a network setup and the laptop and the HTPC can connect to each other when i click their icons in network neighborhood. i can also connect to them from my main computer (QUAD-CORE) but if i try to hit the QUAD-CORE icon on the laptop or the HTPC i get - network path not found. if i type 192.168.1.100 it connects perfectly (i can see all my shared files so i don't think there is a problem with the way i have shared the files) i think my problem is that when i click on the QUAD-CORE icon it is looking for the ip address but something is broken.

View 3 Replies View Related

Can't Find A Way To Resize Text Size

Nov 15, 2010

Just got a new machine with windows seven. The text size in the dialogue eg log in boxes is minute and I cant find a way to resize it.

View 9 Replies View Related

Access File Size Increased By 50 Percent

Sep 24, 2012

I have MS Access 2010 & have a database that has been about 45 MB in size for 2 years. About a month ago I noticed it now is 67 MB. I compact & repair every time I save it which is twice a month. I've gone back & did a compact & repair on the 67 MB file but it does not change.

I must have looked at & changed something without realizing it. The actual number of records appears to be correct. How can examine and/or compare tables or other internals between the two sizes? I've seen a program called AccdbMerge come up on a few Google hits & was wondering if anyone ever used it?

View 7 Replies View Related

When Type In Word 2010, Frequently Keyboard Will Refuse To Type

Aug 13, 2012

When I type in Word 2010, frequently my keyboard will refuse to type. It will type a couple letters and then I have to wait to get it to go on. Then it will type a few more, etc. Another time it will type without an issue.I have changed the battery.

View 1 Replies View Related

Laptop Wont Type But Can Type By On Screen Keyboard?

Jan 15, 2013

my toshiba laptop wont type. but i can type by on screen keyboard.

View 3 Replies View Related

Setting Font To Fit Label?

Dec 31, 2012

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3420 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3570 Mb
Graphics Card: AMD Radeon HD 6410D Graphics, 512 Mb
Hard Drives: C: Total - 936682 MB, Free - 884422 MB; D: Total - 17083 MB, Free - 2133 MB;
Motherboard: PEGATRON CORPORATION, 2ACF
Antivirus: Kaspersky Internet Security, Updated and Enabled

When using Word to print return mailing labels on Avery 8167 sheets, the font cannot be reduced to fit the label.

View 3 Replies View Related

Way To Keep The Windows 7 COA Label From Getting Damaged?

Oct 29, 2011

On laptop computers the Windows certificate of authenticity is printed on a piece of paper which is attached to the bottom of the device. Unfortunately, the license key gets damaged and you cannot read it.Is there some way to overcome this problem? Is there some kind of laminate plastic that can be used to cover the paper

View 9 Replies View Related

How To Actually Make A Label Using The DVD Burner

Oct 25, 2010

I purchased a LITEON DVD 8X Burner , with lightScribe technology but it did not come with any instructions on how to actually make a label using the DVD burner

View 3 Replies View Related

Error 557 + Audio Label Software?

Aug 25, 2011

I'm running Win7 Home Premium (64-bit)I recently installed [b]Audio Label [/b]software, a CD/DVD label maker, jewel case inserts etc It installed without any problem but whenever I start up Audio Label, I get a small window popping up showing: [b]'Error 557'[/b] with an OK button.When I click on OK, the window disappears, Audio Label opens and can be used fully.However, I'm finding it niggling to have that Error 557 everytime and I believe it's because of a missing 'dll' file, but which exactly?Why on earth give such info if you don't show a person how to 'fix' it or at least direct him in some way. OK is NOT OK!

View 1 Replies View Related

Clear Tag Suggestions / Label Assignment?

May 18, 2012

I want to be able to clear some of the tag suggestions from the automatic explorer list.Eg:When tagging photos and you mistype a tag (e.g., you meant to type "Mom", but instead you typed "Nom" or something like that). Even if you delete the tag on the file, the tag still shows up in this suggested list of tags in the Info Pane's tag edit box. So, whenever you go to tag a photo the auto-suggest list shows "Nom" with the other recently used tags.I found this for vista but the label assignment file isnt under photogallery How to clear tag suggestions - Windows Live Photo & Video Blog - Site Home - MSDN Blogs

View 1 Replies View Related

How To Deal With Photo Files Type 1 And Type 2

Jul 23, 2012

I found a few pix in my files that I want to edit with Photoshop. I can't open them in PS because they are Type 1 or Type 2. When I try to open them, PS says they are .jpg.1 or. jpg.2. How do I get rid of the .1 and .2 so they become normal JPG photo files?I can look at them with Windows Photo Viewer but I can't figure out how to convert them to normal JPG files.

View 5 Replies View Related

Created A Disk Label And Now Windows 7 Won't Start

Jun 28, 2011

I have been trying to format a partition I created on my harddrive for my laptop. I booted from a disk into a program called GParted (live CD version). I used this to format the partition I created. Then, once I had finished attempting this task, my lack of expertise in computing took it's toll. I chose the option to create a disk label on the partition. I mistook this operation for something innocuous. It gave me a warning of some sort, which I ignored since I didn't think would be a problem since the recently formatted partition would be empty. This operation took a few seconds (30 or so) and once completed the drive map above said 685 GB unallocated space (or the size of my entire hard drive). I was very scared at this point so I restarted my comp and booted to hard drive and all I get is a blank screen and a mockingly blinking cursor. Now I am trying to see what my factory recovery disk can do for me. Using the windows recovery console I have attempted to repair this. Looking at the details, it runs a few tests. then sees that there is no valid partition, and tries to repair the partition. I restart and nothing has changed. Reattempting the repair just does the same thing and doesn't have any visible affect. Although it looked bad at this point there is some good news. In the recovery console I have attempted to load drivers from the other recovery disk. When the window opens to browse the disk I am able to navigate to the other drives (that I thought were gone) and it seems that all my system and personal files are still intact. I rebooted into GParted and it seems that the original hard drive is visible again and intact. However, I still can't boot!

I do have one option that is unnattractive to me. I have considered reinstalling windows to the partition I created, then once in the OS I could backup all my files to an external device, then redo everything from scratch. However, I am concerned that in the process of installing Windows 7 that I might everything for real. Maybe someone could affirm or repair my paranoia about this? However, I don't want to do this because I have been setting up this laptop for the last 2 weeks and I really don't want to spend the next 2 weeks doing it all over again (although it wouldn't be so bad if i could recover all my downloads and personal files).

View 3 Replies View Related

Can't Print DVD Disc Label With Epson Printer

Jan 15, 2013

I am trying to print a disc label on a dvd ,my printer is a Epson stylus photo Px650 .I have the software for the job but when I drag the into the software it says "this is not a epson cd print file.but I have printed dvd labels before with no problems but I can't remember if it was with XP but I am using windows 7 now .The I want to print is a jpeg is there a way to change it to an epson print file? and if so ,how do I do it?

View 4 Replies View Related

How To Import Custom Label Sheet For Merge Setup

Nov 2, 2012

I guess that almost says it all, except when I attempted to clarify this in an edit, I suspect what I am trying to do is a document merge with fields I would need to create on the document that has the labels, one file has all the data and the other has a layout of six labels.I have a custom label sheet (8.5" x 11" paper, 2 rows, 3 columns with margins) that I wish to use in a merge for name tags. The sheet is NOT printed, so I am not feeding it through a printer for the merge, I wish to do the merge on the computer and send the completed label merge file to a printer at a later date. Part of the reason for this is that I do not have a color printer here and the label picture itself uses color.Where it gets a little more complicated is that though each of the six labels per page is the same, it is a picture (when I double click any one of them the "Picture" ribbon comes up).

View 1 Replies View Related

Can't Access Internet Couldn't Find Solution On Own

Aug 23, 2012

We have 2 computers mine works fine, but my brothers is not able to connect to the internet with any program even though his wireless activity shows excellent.I have scanned with avast and malwarebytes, nothing is found.I have tried pinging google.com and it worksThe only thing that shows up when troubleshooting is "Remote device or resource wont allow access to connection"

View 7 Replies View Related

Change Taskbar Icon Size To Specific Size Other Than Small Or Large?

Mar 7, 2011

Can we change taskbar icons' size to a specific size other than two default windows defined sizes?

View 5 Replies View Related

Show Folder Size Resp Total Size Of Marked Files In Windows 7 Exp Status Bar?

Apr 14, 2011

When I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.

View 3 Replies View Related

Cannot Start Remote Access Connection Manager (Error 2:Cannot Find The Specified File)

May 30, 2012

I had a small problem with my laptop a few days back ,but it was fixed when I removed and inserted the battery. But the F drive was renamed to D drive automatically. I think this was the cause of the following errors, which i noticed when I tried to use my Reliance Netconnect+ datacard and Error 711 (Cannot load the Remote Access Connection Manager Service) showed up.I tried system restore but i noticed it was disabled and so there were no restore points.A little research showed that Now I have the following errors: I cannot start Remote Access Connection Manager (Error 2:Cannot find the specified file) and cant start Remote Access Auto Connection Manager (Error 1068: The dependency or group failed to start). Both services are set to manual.(Target file is svchost.exe -k netsvcs).

View 2 Replies View Related

List All Files / By Size Larger Than A Specified Size?

Feb 14, 2013

I am running out of space on my system drive (120GB SSD with < 6GB remaining). It happened in only 12 months. I'd like to know where all that space went, which files are using it. So I'm looking for a way to rank files by size regardless of their folder location, largest-to-smallest, ideally without a full scan of the disk if there are internal indexes that have this info.

View 2 Replies View Related

What Size Should Use For File Allocation Size 300 Gb Disk

Dec 4, 2011

I am in the process of formating a second 300 GB disk drive in windows 7 64 and don't know what file allocation size to use.

View 13 Replies View Related

Recover Windows 7 Key From Broken Disk Netbook With No Windows Label?

Apr 16, 2012

How can I recover the Windows 7 key if the hard disk has broken (I have changed it) AND I cannot see the Windows key label on the back of the laptop because it isn't there (there's a linux label instead)?, of course my doubt is whether Windows or Linux was the original OS. If Windows 7 was the original OS and is thus an OEM version, can I contact Microsoft and ask them and give them the serial number or product number of the netbook?

View 6 Replies View Related

Hard Drive Size Ridiculously Far Off, Disk Management Shows Full Drive Size?

Dec 16, 2009

My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...

View 9 Replies View Related

Make Customized Paper Size Appear In Paper Size Lis?

Mar 27, 2012

Since upgrading to Windows 7 Home Premium I can no longer use any of the HP Printing software that came with the HP 5280 All In One Printer which I had set up with custom paper sizes to print large panorama photo's,eg 420mm x 210mm.I know the printer is capable of printing photo's this size as I have printed many panoramic photo's in this and similar sizes when I was running XP.I have set some custom sizes in Print Server Properties and the settings are being saved there but they do not appear in any paper size lists in Windows or in the HP printer preferences.This is the procedure I'm following.1) Click start menu,then Control Panel,and finally View Devices And Printers.2) Click printer in the list(HP 5280),then click Print Server Properties.3) Click Create New Form,type a custom paper name in the Form Name text box and enter the desired paper size under Paper Size.Click the Save Form button,and the new form is present in the paper list

View 3 Replies View Related

How To Find Find Locker Made Invisible Using Folder Protect

Apr 5, 2012

1.I had created a locker on my desktop using "Folder Lock" software.
2.Subsequently I made the locker invisible using "Folder Protect" software.
3.When I was trying to add more files to the locker created in 1 the locker tried to "increase it's size on the run"...
4.This process failed and "Folder Lock" shut down and since then I cannot locate the locker anymore on my PC nor can I see it in "Folder Protect"
5.Having read on a forum, I uninstalled "Folder Protect" and reinstalled...but that did not help..I still could not find the Locker.
6.I even uninstalled and reinstalled "Folder Lock"...even this did not help
7.I understand the lockers created by "Folder Lock" are UNDELETABLE.
8.Clearly my locker is somewhere on my hard disk but I am unable to locate it.

View 2 Replies View Related

Can't Type Password?

Sep 21, 2011

seen a few similar posts floating around but nothing that is exactly my issue or gives a suitable answer.m running Win 7 64bit on a desktop, I have a Logitech wireless keyboard and mouse, and Wacom tablet.So I could not type in my windows password this morning, either using the Logitech keyboard or the on-screen one with the mouse. After about an hour of trying and several restarts (and my primary and secondary monitors switching for some reason), I could put the password in Once in Windows I found there was a keyboard issue: I was only typing the occasional special character (an accented i was one:) . Trying to type a test email I had the i-cursor available in the header (title-box) but not the body, even the special characters could not be typed in the main body. For some reason I picked up my pen tool, moving this over the email body produced a �control/Alt yellow box prompt next to the pen cursor pressed these keys, now all is fine

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved