I'm not 100% sure it's a sandbox program I need, but basically I want to be able to load up an XP program within Windows 7 without it being able to affect my Win 7 installation, and thought a Sandbox would be what I need, but those I've looked at tend to seem more related to specific programs themselves e.g. browsers, audio players etc.
I am wondering if i have a questionable peice of software that may contain a virus or what not if i can use XP mode as a sandbox to test it so that if it does it will not afect my Computer.
main problem on this computer is thats it a windows XP motherboard trying desperately to run Win7. It can to a point, but is having issues as Win 7 improves etc. etc. Now my gaming rig is Win7 has a far better graphics platform but has a small C drive. Initially it ran Rfactor (online car racing, and I organize races for a team of guys, we do this weekly and consequently I have several other related programs) and that was all it was going to run. So since then another group of us play BF3 and I've always liked the golf games so I ported those to games across to the gaming rig - hence the reason they are on another drive. I could get another larger drive and start again from scratch but it is to damn awkward at the moment because of the racing season has started. Obviously there is a problem with TW writing log files to my I: drive but I would have thought Origin Had thought of that when they are saying that you can install the game on another drive (other than C: Drive)
A program I use (neuro programmer) used to work quite well on my system but now when ever I try to load it, I get this error:[CODE]This obviously is related to me having sandboxie installed on my computer and then removing it incorrectly. I tried re-installing sandboxie and neuro programmer numerous times.I have tried to locate the folder but it doesn't exist on my systemI have run a registry cleaner (which I now know isn't the best) run several different spy/ad/malware scanners with nothing coming up.I haven't tested all my programs, but I am sure this could be a problem for a few of them.Is there anyway I can get this program to start? Is it a registry error? I looked in regedit and couldn't see anything really linked to neuro programmer (not that I am really aware of what to look for
i have a wierd problem, some months before i used to have a software named sandboxie.Then suddenly some time i started experiencing BSOD errors about a message i dont remember but it was like "wrong write adress in memory".I unninstaled sandboxie and it stopped.Then 5 weeks ago i installed another sandboxie-like software named buffer zone pro and after install same thing happens random BSOD with same message.Also my pc has been formated in the meantime from sandboxie and bufferzone for other reasons but the problem still remains.
I'm moving from an XP machine to a Windows 7 machine and have transferred my project files (engraving files as well as .bmp). When I try to open a project folder in any of the programs I use it takes 2-3 minutes for it to load all the filesThere are just over 10,000 files in the folder, they are all small files (nothing larger than 100k), and on the XP machine it loads in an instant.I have done everything I can find online (turned off indexing, changed the folder prefs, etc) and nothing works. When I open the folder within Windows it loads in an instant, however when I try to open it within a program is when it dragsDoes anybody have any ideas of what else I can try outside of threatening the computer with physical violence?Also as you can tell by my screen name I'm a mac user that has to use PCs at work.
During a recent windows update my pc froze, (mid-update) and I restarted my machine. Now windows gets stuck at the black" Loading operating system..."screen. After a long wait it will eventually display boot from cd/. When I boot from my windows dvd my os is not shown in system recovery. I Have also tried running start up repair from recovery with no luck.
One particular site that is not loading at all, on any browsers on my computer is [URL]. There are many more that fail to load as well. I did test these sites on my iPhone with no problems though. There are a handful of other sites that do open but do not load properly [missing images, ect.] I also thought that it might be malware but I installed & scanned my computer with four different programs which did not solve the problem. I'm guessing that it still may be some problem on the software side with settings but I can't seem to figure out where to look. BTW, I've been using Microsoft Security Essentials as my antivirus program for the past couple of days now. Prior to that I was using Avira but it seemed to be giving me problems so I uninstalled it and installed the Microsoft app.
I installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.
Until yesterday I had two different versions of Windows installed on two different hard drives, one on C: and one on E:. Yesterday I decided to remove the one on E: and started using CCleaner to just wipe the drive clean. I stopped in the middle and decided to format the disk instead because it was going to take a few hours using CCleaner's wipe. But by then Windows was having trouble with that drive and although it was detected, I couldn't format it or do anything to it for that matter.So I downloaded a copy of Natty and running it from the disk, I was going to try formatting it from there, but it was not detecting that drive. Fine. I understand there is a way to mount the drive and I just have to figure that out.
i have a big problem my window is not able to load properly after window 7 log my pc gets hang and nothing can be done 1st i thought it can be because of corrupted window so i tried to install new window that's window 8 but new setup is also getting hang what to do guys?and good thing is that window 7 is working fine in safe mode but its not working in normal mode in any case nor in normal window or in normal setup mode
Im looking for a portable program which includes a Browser and a Mailing program, like Opera is, but NOT Opera (must be able to run beside Opera & Firefox!!)
I have read a lot on this getting stuck. I had an issue with it getting stuck, so I had HP to send me the recovery disks and I backed everything up and did a clean install. It did its thing and now it is at the Windows is loading files screen. Bad news is, it has been on this screen since last night at around 8:00 (12 hrs), Good news is, it has been moving. I put a sticky note on the progress bar, even this morning it has moved about a half an inch. Should I be worried or just patient? It said it may take up to 3 hours and it has been 12 hours.
I did a clean windows 7 installation after formatting my Hard drive the installation went clean i noticed that after switching my computer it takes me directly to " starting windows " and then to " Login screen " but in my previous installation i use to get,As shown in the picture, the black screen showing microsoft corporation logo with green bar and i am not getting the same in my new installation what went wrong.
i followed the same issues and solution shown here:[URL]..but the problem is, when i go to that folder using command prompt, i dont see any cachecat.cache file, only driver.rtl in codeintegrity.
I am using dell insipiron n5010. Windows was slow for thrower couple of days and today it's not even loading the desktop and the startup to the welcome page is dead slow. The hdd light is always on display.
A few months back, my laptop started getting stuck at the splash screen. The problem used to come and go but it annoyed me so I gave my laptop to lenovo customer care service. They advised me to restore my OS and I did the same but to no avail. The problem still persisted. Then I went again to a different lenovo customer service and they updated my BIOS and tweaked it. It worked good for about 12 hours or so.
windows 7 never finishes loading. sometimes i get the desktop with all icons but the mouse pointer has the loading icon and i can't do a thing. other times i only get the background image and the start bar but again, i can't do a thing. all this started after i had to force-shutdown my laptop after it froze while i was watching a maximized Internet video on firefox 4... what can i do?
I just got a new computer that I built: i5 2500k, MSIP67 G43, 8GB RAM, 2 6850s in CF, Corsair 750w PS. I'm running Windows 7 Ultimate 64bit.It was working fine yesterday but sometime this morning it started hanging up. Basically what happens is the username screen comes on, I click the user, then it makes the little chime.I can see the recycle bin, I can access the start menu but I can't do anything after that. My network connection icon in the task bar freezes for about 3-4 minutes.During that time I'm unable to open any program until it connects. After that, everything works fine.All I've installed today was a windows update, an updated driver for my Networking card, and GWFL client. I was overclocking my CPU also, but since I'm troubleshooting this, I rolled it back to the default settings.I've uninstalled GFWL, and I've rolled back to the previous drivers and it still does this.
My Windows 7 was not able to load multiple times after I reformat the HD timse and times again. I also followed some tips to system restore and what not in Safe Mode but that still doesn't work. I'm currently typing this problem in Safe mode with Network but that's the thing.I'm able to load into Windows but not in a normal way.I'm having a suspicion that my HD cache might have messed up. I'm still using Intel's faulty p67 motherboard too, is that also the problem?
I have noticed this problem across a variety of computers that are as old as 10 years and as new as 1 month old. Also the same happens on XP machines and Windows 7 machines. I don't recall seeing this before. It just happened in the last 6 months or so (I think). Anyways, I start the computer, log on to an user account and the startup programs start to load. It is at this point that a message appears that states that the firewall is turned off. It usually last for 10 to 20 seconds and then the firewall is turned on again. It does not happen every time I start the computer (just once a day or so). Shouldn't the firewall be the first thing to load or is there a delay with a warning message?
So i went to turn on my computer today, and as i started it, my background image loaded up but none of my icons. On the bottom right it says "Test Mode Windows 7 Build 7600". Ive restarted it many times same result. I put it into safe mode and did a system recovery but same result.
I'm in the Midwest and thunderstorms are quite common out in this area. To protect my computer from power surges, I turn off BOTH my computer and the power supply. Then I unplug the surge protector from the socket which the computer and other peripherals are attached to. However, this morning when I plugged back the surge protector, turned on the PSU and then computer, Windows gave me a message the there was no virtual disk and then it went to a blank screen and got stuck there.
Ok so I just finished my first gaming build and it all came together nicely, however I can't figure out how to download windows 7 pro 64-bit form BIOS?
And the windows disk is a copy so that might be the reason why I can't boot into windows idk for sure though any advice would be awesome!!
my rig is working fine however I have noticed something strange that occurs whenever I boot my rig, when I got to the part where Windows 7 is loading instead of getting the windows logo on the screen and "starting windows" I get 8 blue lines along the top left of my screen. I was wondering if anybody else has ran into this problem or may have heard of it before[CODE]