I have ordered a new computer with 2TB SATA disk. The first step I must do is to partition a disk.As far as I have been reading tutorials on this site it is recommended to separate Windows/ programs and Documents into separate partitions. So I am going to create C- partition for Windows and Program Files of about 100MB.What about the other partitions. Is it worth to create separate partitions for say for "Images", "Documents", "Development Projects". Or is it better to put all this stuff into one partition? Advantage of multiple partitions, as I see, would be more flexibility for backup/recovery. From the other side, disadvantage of multiple partitions would be not optimal usage of disk space.
I need to create a new partition for Ubuntu, but I have the maximum number of partitions. I have tried converting the disk to dynamic, but it says that there is not enough space available for that. What should I do? (The 75 gb unallocated space is where Ubuntu should go)url...
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
I have a M4A785-M asus Motherboard, a few months ago I sadly had to get rid of my Graphics card due to some IRL reasons, and I am left with the stock internal motherboard graphics, which aren't that bad for integrated. ATI Radeon HD 4200 256MB integrated graphics.Well, as you can tell by the crappy internal card, it is hard for me to play games, Minecraft, TF2, GTA Series (including 4) COD Portal 1 & 2 etc.So after a while I just accepted it, and became addicted to Minecraft.But recently I came across some BIOS issues, the in otherboard drivers crashed, fixed the issue with the Crash Free BIOS3 included with the motherboard, and realised that there were some extra drivers that I didn't have. It came with the turbo key, some extra software for light overclocking of the CPU, and a graphics overclocker.Me not being a common overclocker myself, I have no idea what I'm doing, my CPU is fine, I can live with what I have.. But I would like to know how to work the GPU NOS.So I can get back to gaming, the computer can barely run GTA4 with 12FPS on minimum settings. Really cheezy looking.
I use the 7100 RC one and i see theres enw builds out there. Does win update itself on builds? do i get the fixes the new build has? Still in sys info it sais i use 7100 so i guess its not self updated.
Delete Unwanted Programs InKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFileExts*filetype*OpenWithLis tut After Try That. It's No Effect In Open with Window... I Use Media Player Classic x64 Associate For All Videos Files But.. Windows Media Player Is Blue Background Need to Change It.
I just purchased a OCZ Vertex 2 120 GB and was wondering what is the recommended setup for an SSD? I currently have a WD Raptor 300 GB, a older WD 150 GB hard drive and I am using Windows 7 64 bit. Is it recommended to use the SSD just for the Operating System or can you use it for all of your programs?
FYI: whenever I download games, applications and multimedia, I store it or install it in D: leaving C: with enough space as much as possible thinking that it's good if C: is not loaded with programs and files since OS is stored there.
I am curious if there are any recommended system tuning software for 64 bits windows 7? I come across Advanced System Optimizer 3 and PCKeeper. I have not tried either of them but I have heard a few bad reviews for ASO.
I have tried both ThunderBird and Postbox Express..But both of them cannot import my folders in hotmail..Tried many methods but it didnt wotk out too well.
I'm from the old school days of using only spybot s&d and ad-aware but knowing times change and all, looking to get more current and clean my PC back up in the process. In doing a little research I'm using these programs and would like some further recommendations. What do you use? What would you recommend?
As far as I know the 64 bit version uses more memory than than the 32 bit version, also the programs on that version use more memory than on the 32 counterpart.It is also my understanding that the difference is about 40%-50% of more memory intake.So, if the 32 bit version can use up to 3.25-3.75 GB RAM out of 4GB, and the 64 bit version uses effectively equivalent of about 2 GB out of 4, then why is this version recommended for anything less than 8GB?
I have a Dell E197FP Monitor I hooked up to my new Windows 7 box. Windows won't give me a resolution over 1280 x 1024, even though I was running at a higher resolution on my XP system before. I know Win 7 supports higher resolutions, because it gave me higher options when hooked to a CRT monitor I used first.
I've got a windows 7 x64 machine and I need to migrate it to another hard disk. Currently its running on an old 160GB IDE (i know....) and I want to migrate the install to a pair of 500GB WD SATA2 drives.I know how to mirror the disks, but I need to find a way to migrate without a re-install. It's a long time since I did anything like this on windows (It's so easy on other OSs).I'd like to partition the new disk (say, 40GB) and migrate the current system to that. Then add the second disk and mirror it, create the second partition etc. So...what are the recommended ways to migrate a system to a new disk?
I want to repartition my HDD which has a capacity of approximately 80 GB, but it is shown as 74.5 GB in windows disk management app. I have split the hard drive into 3 partitions of equal size each of 24.8 GB and installed windows 7 ultimate (32-bit) on one partition, and the other two are for my data (including documents, music, videos, pictures etc.). In my opinion, 24.8 GB partition is not enough for Windows 7 because it is the only OS that I use and as I install updates and service packs etc, it fills up gradually and leaving only a few GBs of free space left on the Win 7 partition.
I have just recently acquired a flash-drive and have been curious as to how to encrypt some files on it. The key word being some.It's a large drive (8GB), and will be used for many different things. I want an area on the drive to be used to transport/hold personal documents which I wish to have encrypted.I have tried software like TrueCrypt which decided to use the whole drive, and didn't seem to work properly anyway (?)I want something that acts like a 'safe', I double click it, I enter a password, I access the files.I need the software to run strictly from the stick, without the need for Admin' Privileges and for it to work on most operating systems (2000 and newer)... I understand I could use old fashioned password protected/encrypted .zip's.... but I don't know if Windows can natively read these without the need of say 7zip or WinZip.
Yesterday (11/02/12) Windows notified that there were a couple of critical updates available for installation. Always keen to keep my spec up-to-date I proceeded to install them. I'm afraid I don't know the details of the updates. As I did a System Restore (see below) they have been removed from the list of Installed Updates.After automatic installing and re-starting the first thing I noticed was that the screen resolution had been changed. Fixed that through control panel. More importantly I discovered that the following had occurred: I could not get any sound. Could not get streaming video. Flash crashed every time Certain links within Control Panel would not function Investigating (1) above, Device Manager reported that the hardware was functioning correctly. In attempting to resolve this via Control Panel/Appearance & Personalization/Personalization I noticed that the Sounds link indicated No sounds and I could not click through from the link (see below) to change anything (this happens with a few other Control Panel options).
I can find no way of reaching the sound properties. All links are non-functioning.For (2) I uninstalled Flash Player using the Flash uninstaller, cleared out the registry of any remaining entries for it (yes there were still a couple) and re-installed it (v11.1.102.55) and re-started PC. On first re-install I had no success but tried same process again and did get it to stream video (no sound). However when I started PC today we are back to the same problem.I have also cleaned registry with no improvement.Having drawn a blank with these two problems I then did a system restore to the point where the Windows updates occurred. This has not changed anything so I am really stuck as to know what if anything I can do. The system and applications generally are working fine. Networking and Internet connection is fine. As the machine came pre-loaded with Win 7 I do not have a Windows Disk.
I want to adjust my screen resolution to 1680 x 1080 (recommended for 17" Laptop). But the only option available is 1366 x 780. How do I get additional options?
On my Dell Vostro laptop, Up until today I never had a problem but now when I plug in my energy monitor to a USB port I do.. I have a mouse plugged in one port. If I plug in my energy monitor into any of the other 3 USB ports it installs a USB to serial port at the next higher com number. Its up to com 18 now. If I unplug and replug it in again it will find USB to serial com 19. It just keeps going up. How can I reset it back to 3 or 4.
Been searching the net for ages to sort out this bug in IE, but alas.Basically, if you try to open like a hundred IE windows, I start getting weird issues.I can open hundreds and hundreds of FF windows, but for some reason, IE doesn't hack it.I read that it's something to do with desktop heap, so I upped it's value via the registry (SharedSection), but to no avail. Messes up at something like 70 windows, every time. Has anyone managed to successfully open 100 IE windows here in Windows 7 Pro x64?
When I try to upload something to a site that I frequently send uploads to without a problem I get the message:"Error Number 10053 - Connection is aborted due to timeout or other failure. Probably temporary fault and should try again later. I've tried many times since yesterday morning when the problem started, have restarted my computer and disconnected/reconnected my internet connection but still have the problem. I sent a message to the website and no one else appears to have the problem - so assume it is a problem my end. Does anyone have any suggestions of what might be wrong and how to fix it.
I have a hp pavillion dv6-1378nr entertainment pc notebook...never had a problem before...I cannot get my numeric keypad to work...I do have the number lock on..
my laptop appear "serial number not found"Why? how do I can repair? I had arrive all HP VietNam, HCM my laptop's warranty card had expired. I very very disappointed. My family had three laptop HP. my laptop is HP Pavillion DV5T-1000
