I'm from the old school days of using only spybot s&d and ad-aware but knowing times change and all, looking to get more current and clean my PC back up in the process. In doing a little research I'm using these programs and would like some further recommendations. What do you use? What would you recommend?
I can only connect to the network using 64 bit applications on Window 7 Pro SP1.The problem occured after installing the latest version of iTunes (may or may not be related). I uninstalled iTunes with no change. IE 32 bit crashes after opening. Firefox opens but gives Server Not Found error. I cannot connect webservers on the local network with Firefox either. Filezilla will not connect to local or remote servers. VNC will not connect to local servers - IE 64 works fine and command line tools like ftp and telnet to internal and external sites works fine - this is not a DNS, Firewall, or Routing issue.
Same results in Safe Mode sfc /scannow runs clean.
I reset the winsock, uninstalled all my network adapters, including the drivers and resinstalled them.Rebooted multiple times.Unfortunately I just discoved that System Restore was not enabled so I can't roll back.I doubt this is malware related as I have multiple levels of defense (postini, SpyShelter, Symantec Endpoint) and outside of iTunes have not downloaded or installed anything or even visited unusual websites. I'm about to do a deep scan that will probably take a few hours just to play it safe.
What windows 7 maintenence program finds shortcuts you haven't used in a while. Last night I checked the little flag to see if any problems needed fixing and i can't for the life of me remember what it said but i launched it and it started checking for problem's it even told me what shortcut's i haven't used in a while. I did not let it finish checking as I have never seen this program in all the time I have had windows 7 and i have had it since it came out.
After I close programs that are still pinned to the task bar, can I install another program where the install wizard recommends closing any programs before continuing?
I have a M4A785-M asus Motherboard, a few months ago I sadly had to get rid of my Graphics card due to some IRL reasons, and I am left with the stock internal motherboard graphics, which aren't that bad for integrated. ATI Radeon HD 4200 256MB integrated graphics.Well, as you can tell by the crappy internal card, it is hard for me to play games, Minecraft, TF2, GTA Series (including 4) COD Portal 1 & 2 etc.So after a while I just accepted it, and became addicted to Minecraft.But recently I came across some BIOS issues, the in otherboard drivers crashed, fixed the issue with the Crash Free BIOS3 included with the motherboard, and realised that there were some extra drivers that I didn't have. It came with the turbo key, some extra software for light overclocking of the CPU, and a graphics overclocker.Me not being a common overclocker myself, I have no idea what I'm doing, my CPU is fine, I can live with what I have.. But I would like to know how to work the GPU NOS.So I can get back to gaming, the computer can barely run GTA4 with 12FPS on minimum settings. Really cheezy looking.
I use the 7100 RC one and i see theres enw builds out there. Does win update itself on builds? do i get the fixes the new build has? Still in sys info it sais i use 7100 so i guess its not self updated.
Delete Unwanted Programs InKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFileExts*filetype*OpenWithLis tut After Try That. It's No Effect In Open with Window... I Use Media Player Classic x64 Associate For All Videos Files But.. Windows Media Player Is Blue Background Need to Change It.
I just purchased a OCZ Vertex 2 120 GB and was wondering what is the recommended setup for an SSD? I currently have a WD Raptor 300 GB, a older WD 150 GB hard drive and I am using Windows 7 64 bit. Is it recommended to use the SSD just for the Operating System or can you use it for all of your programs?
I have ordered a new computer with 2TB SATA disk. The first step I must do is to partition a disk.As far as I have been reading tutorials on this site it is recommended to separate Windows/ programs and Documents into separate partitions. So I am going to create C- partition for Windows and Program Files of about 100MB.What about the other partitions. Is it worth to create separate partitions for say for "Images", "Documents", "Development Projects". Or is it better to put all this stuff into one partition? Advantage of multiple partitions, as I see, would be more flexibility for backup/recovery. From the other side, disadvantage of multiple partitions would be not optimal usage of disk space.
FYI: whenever I download games, applications and multimedia, I store it or install it in D: leaving C: with enough space as much as possible thinking that it's good if C: is not loaded with programs and files since OS is stored there.
I am curious if there are any recommended system tuning software for 64 bits windows 7? I come across Advanced System Optimizer 3 and PCKeeper. I have not tried either of them but I have heard a few bad reviews for ASO.
I have tried both ThunderBird and Postbox Express..But both of them cannot import my folders in hotmail..Tried many methods but it didnt wotk out too well.
As far as I know the 64 bit version uses more memory than than the 32 bit version, also the programs on that version use more memory than on the 32 counterpart.It is also my understanding that the difference is about 40%-50% of more memory intake.So, if the 32 bit version can use up to 3.25-3.75 GB RAM out of 4GB, and the 64 bit version uses effectively equivalent of about 2 GB out of 4, then why is this version recommended for anything less than 8GB?
I have a Dell E197FP Monitor I hooked up to my new Windows 7 box. Windows won't give me a resolution over 1280 x 1024, even though I was running at a higher resolution on my XP system before. I know Win 7 supports higher resolutions, because it gave me higher options when hooked to a CRT monitor I used first.
I've got a windows 7 x64 machine and I need to migrate it to another hard disk. Currently its running on an old 160GB IDE (i know....) and I want to migrate the install to a pair of 500GB WD SATA2 drives.I know how to mirror the disks, but I need to find a way to migrate without a re-install. It's a long time since I did anything like this on windows (It's so easy on other OSs).I'd like to partition the new disk (say, 40GB) and migrate the current system to that. Then add the second disk and mirror it, create the second partition etc. So...what are the recommended ways to migrate a system to a new disk?
I want to repartition my HDD which has a capacity of approximately 80 GB, but it is shown as 74.5 GB in windows disk management app. I have split the hard drive into 3 partitions of equal size each of 24.8 GB and installed windows 7 ultimate (32-bit) on one partition, and the other two are for my data (including documents, music, videos, pictures etc.). In my opinion, 24.8 GB partition is not enough for Windows 7 because it is the only OS that I use and as I install updates and service packs etc, it fills up gradually and leaving only a few GBs of free space left on the Win 7 partition.
I have just recently acquired a flash-drive and have been curious as to how to encrypt some files on it. The key word being some.It's a large drive (8GB), and will be used for many different things. I want an area on the drive to be used to transport/hold personal documents which I wish to have encrypted.I have tried software like TrueCrypt which decided to use the whole drive, and didn't seem to work properly anyway (?)I want something that acts like a 'safe', I double click it, I enter a password, I access the files.I need the software to run strictly from the stick, without the need for Admin' Privileges and for it to work on most operating systems (2000 and newer)... I understand I could use old fashioned password protected/encrypted .zip's.... but I don't know if Windows can natively read these without the need of say 7zip or WinZip.
Yesterday (11/02/12) Windows notified that there were a couple of critical updates available for installation. Always keen to keep my spec up-to-date I proceeded to install them. I'm afraid I don't know the details of the updates. As I did a System Restore (see below) they have been removed from the list of Installed Updates.After automatic installing and re-starting the first thing I noticed was that the screen resolution had been changed. Fixed that through control panel. More importantly I discovered that the following had occurred: I could not get any sound. Could not get streaming video. Flash crashed every time Certain links within Control Panel would not function Investigating (1) above, Device Manager reported that the hardware was functioning correctly. In attempting to resolve this via Control Panel/Appearance & Personalization/Personalization I noticed that the Sounds link indicated No sounds and I could not click through from the link (see below) to change anything (this happens with a few other Control Panel options).
I can find no way of reaching the sound properties. All links are non-functioning.For (2) I uninstalled Flash Player using the Flash uninstaller, cleared out the registry of any remaining entries for it (yes there were still a couple) and re-installed it (v11.1.102.55) and re-started PC. On first re-install I had no success but tried same process again and did get it to stream video (no sound). However when I started PC today we are back to the same problem.I have also cleaned registry with no improvement.Having drawn a blank with these two problems I then did a system restore to the point where the Windows updates occurred. This has not changed anything so I am really stuck as to know what if anything I can do. The system and applications generally are working fine. Networking and Internet connection is fine. As the machine came pre-loaded with Win 7 I do not have a Windows Disk.
I want to adjust my screen resolution to 1680 x 1080 (recommended for 17" Laptop). But the only option available is 1366 x 780. How do I get additional options?
After a minor infection, something Komondo calls trojware.win32.agent.gen@218380279 I can not run Malwarebytes, Spybot or AdAware.Networking not getting an IP from the router either. Have tried netsh winsock reset and went to ControlPanel-Network & Sharing-network connection but it comes up blank. Ethernet card shows up in Device Manager.Just discovered that almost every service is disabled!
Our computer with windows XP crashed and died. We now have windows 7. when i log on to the internet i have six lines of apps in addition to the yahoo search bar. i only need the yahoo search bar and the 'Options" app, the http:// search bar, the minimize app, the close app, the restore down app, the home app, the favorites,feeds and history app, the tools app, the tool bar options app, and maybe the line that shows previous sites. i do not need bing search bar, and all the other,(about 40 or so) other things to click on. they just take up space.how can i take off the things on the top of the page which i do not want and do not need.
You cannot move appp around in windows as windows makes DLL files and registry entry and moving it will break it.Also Microsoft wants people to use shortcuts and moving apps will break the shortcuts of path of the files.
In OS X all files needed to to run the app are glued with the app and in windows you must run the installer to make the directory where it will copy all files to run the app ,make path ,make the shortcuts and DLL files and registry entry .
Moving files around break the DLL files and registry entry .Part of this is to stop illegal copying.In windows people use the installer to remove or install app we never move app around like in OS X .
Also most time apps have to run in system level in windows not like OS X It is not the scopes of Linux ,windows ,OS X security myths but the thread got little of topic of talking about moving appp around in windows and other OS.
I have Windows 7 Home Premium. I can connect to and browse the internet using Google Chrome. Internet Explorer times out. I noticed the problem because my AVG update is not updating. I also have not received any Windows updates and when I tell Windows to check, it takes a long while to say that there are none - my assumption is that it cannot get a connection and is timing out.
ii am using windows 7 . suddenly apps like bit torrent , tune up utilities , google chrome crashed when opening. tried to reinstall but then also crashed .
I recently built a system based on a MSI Z68-GD80 mobo + i7-2600k. Comes with Virtue which is supposed to automatically switch from Intel gfx to discrete gfx card when a game is fired up has a white list of approved games and the ability to add your own game to the list.Although I am not a gamer, I tried adding the exe for Cinema 4D to the list, but it didn't activate the Virtu process when I opened C4D.So I was wondering - has any forum members successfully added any graphics apps to the Virtu list, or is it really only for 3D games and just gets triggered by DirectX etc.BTW I would like to use both on-die and discrete gfx because my Black Gold HDTV card works great with Intel gfx, but pixelates with the HD5770 card.
I made 3 partitions on a 128G SSD. I installed Win7Pro64 on the first partition. Now I'm ready to install some programs and I just realized, I don't really want to change the default directories at all...I think that's just asking for confusion and trouble.
I was so convinced I needed a separate Programs partition. good reason to have a separate partition for your programs?
Very peculiar problem that probably started with installation of a toolbar by mistake. Suppose I'm in chrome and typing in a text box, after exact 5s, the whole window loses focus and i need to click on the box again to regain focus and resume typing (you can understand how annoying this is). I have tried these so far but failed to resolve: Got rid of the toolbar, Ran MSE. It cleaned two security issues. Created new user, Still, the same. No change.
what can you expect if you try and install a Windows 7 application with hardware and drivers on a Windows xp OS. I am looking for technical data on this scenario not just that it will not work.
