Loss Of Functions Following Recommended Critical Update
Feb 12, 2012
Yesterday (11/02/12) Windows notified that there were a couple of critical updates available for installation. Always keen to keep my spec up-to-date I proceeded to install them. I'm afraid I don't know the details of the updates. As I did a System Restore (see below) they have been removed from the list of Installed Updates.After automatic installing and re-starting the first thing I noticed was that the screen resolution had been changed. Fixed that through control panel. More importantly I discovered that the following had occurred: I could not get any sound. Could not get streaming video. Flash crashed every time Certain links within Control Panel would not function Investigating (1) above, Device Manager reported that the hardware was functioning correctly. In attempting to resolve this via Control Panel/Appearance & Personalization/Personalization I noticed that the Sounds link indicated No sounds and I could not click through from the link (see below) to change anything (this happens with a few other Control Panel options).
I can find no way of reaching the sound properties. All links are non-functioning.For (2) I uninstalled Flash Player using the Flash uninstaller, cleared out the registry of any remaining entries for it (yes there were still a couple) and re-installed it (v11.1.102.55) and re-started PC. On first re-install I had no success but tried same process again and did get it to stream video (no sound). However when I started PC today we are back to the same problem.I have also cleaned registry with no improvement.Having drawn a blank with these two problems I then did a system restore to the point where the Windows updates occurred. This has not changed anything so I am really stuck as to know what if anything I can do. The system and applications generally are working fine. Networking and Internet connection is fine. As the machine came pre-loaded with Win 7 I do not have a Windows Disk.
View 1 Replies
ADVERTISEMENT
Jan 30, 2011
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies
View Related
Apr 16, 2011
All USB ports on my computer turn off upon the launching of Windaows 7. I have functionality in the DOS mode, however. My KB and mouse are USB, so when windows launches I lose my interface to teh computer.
View 1 Replies
View Related
Jun 21, 2011
My computer did a critical update last night, went to MS its own and did it. Now it runs very slow, and most programs wont respond at all?
View 1 Replies
View Related
Aug 9, 2012
I had Windows 7 automatically downloading and installing critical updates. NO MORE!!! On 8/7/2012 a critical update was automatically downloaded and installed, unnoticed by me. When my computer would not turn on yesterday, 8/8/12 I tried many things, eventually restarting in Safe Mode - which did at least get me out of the black error screen and into windows. After poking around and testing things, I finally decided the only way to go was System Restore. There, I found there'd been an automatic critical update on 8/7/12. After restoring to before that point and turning off all automatic windows updates, my computer is now running fine.
View 11 Replies
View Related
Sep 14, 2012
My windows 7 computer hung when i started it the other day. The startup repair did not work after several attempts. I tried to choose an old restore point and it gave me a message "you must enable protection on this drive" Problem was, it did not allow me to check the drive box or give any option to enable protection....So, i started a system restore of the software, keeping data intact. It did its thing and presented a message "setup could not install windows on this systems hardware" It then reboots and comes back with " windows could not complete the installation. To install windows on this computer, restart the installation." It just keeps rebooting and returning this message....i cannot restart the installation.... the only other info i got was after the initial startup repair it said this :
System disk=devicehardisk0
windows directory = d:windows
autock = 0
number of root causes = 1
this all happend after a critical windows update by the way....
View 3 Replies
View Related
Jan 13, 2013
My computer won't start after Windows 7 critical update 1/11/13. I was able to start in safe mode and restore to an earlier date. However, that only worked for 1 day. Now it won't connect to wireless either.
View 4 Replies
View Related
Oct 13, 2012
The wireless adapter does NOT appear in ipconfig! but Ethernet does.Ethernet works properly.Unable to rollback/system restore as all deleted (don't know how or why).There is no wireless connectivity and with a USB wireless adapter the same problem. Hardware installs and says working OK, but unable to connect to wireless also.
Ipconfig is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Jabberwocky
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 1 Replies
View Related
Sep 18, 2011
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
View 1 Replies
View Related
Jan 13, 2013
I have my Windows update settings to "notify but do not download." When I check my history of restore points I see that there are several created anyway with the description "Windows Update-Critical Update." I checked one of them for changes to programs and drivers and the were none. This seems to happening about every 3 days. Is this just an automatic update that is mislabeled? And why every three days - from my research it appears recovery points are supposedly scheduled every seven days?
View 4 Replies
View Related
Jan 15, 2013
I had a power loss while running on battery (it still showed power left, but suddenly shut down anyway) and when I restart, it reports that the Windows is not activated and Window is not genuine and system might be a victim of "counterfeiting."
Is this a virus (I have MSE on continuously and about once a week scan with Malwarebytes)? I have run 'sfc /scannow' with filtered output ('findstr /c: "[SR]" c:.....logsCBSCBS.log" and it appears as usual.
How can I lose my Windows activation?
View 4 Replies
View Related
Aug 30, 2012
I have a M4A785-M asus Motherboard, a few months ago I sadly had to get rid of my Graphics card due to some IRL reasons, and I am left with the stock internal motherboard graphics, which aren't that bad for integrated. ATI Radeon HD 4200 256MB integrated graphics.Well, as you can tell by the crappy internal card, it is hard for me to play games, Minecraft, TF2, GTA Series (including 4) COD Portal 1 & 2 etc.So after a while I just accepted it, and became addicted to Minecraft.But recently I came across some BIOS issues, the in otherboard drivers crashed, fixed the issue with the Crash Free BIOS3 included with the motherboard, and realised that there were some extra drivers that I didn't have. It came with the turbo key, some extra software for light overclocking of the CPU, and a graphics overclocker.Me not being a common overclocker myself, I have no idea what I'm doing, my CPU is fine, I can live with what I have.. But I would like to know how to work the GPU NOS.So I can get back to gaming, the computer can barely run GTA4 with 12FPS on minimum settings. Really cheezy looking.
[code]...
View 4 Replies
View Related
May 17, 2009
Is it recommended to install new builds?
I use the 7100 RC one and i see theres enw builds out there. Does win update itself on builds? do i get the fixes the new build has? Still in sys info it sais i use 7100 so i guess its not self updated.
What do i do?
View 8 Replies
View Related
Aug 6, 2011
Delete Unwanted Programs InKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFileExts*filetype*OpenWithLis tut After Try That. It's No Effect In Open with Window... I Use Media Player Classic x64 Associate For All Videos Files But.. Windows Media Player Is Blue Background Need to Change It.
View 4 Replies
View Related
Mar 1, 2011
I just purchased a OCZ Vertex 2 120 GB and was wondering what is the recommended setup for an SSD? I currently have a WD Raptor 300 GB, a older WD 150 GB hard drive and I am using Windows 7 64 bit. Is it recommended to use the SSD just for the Operating System or can you use it for all of your programs?
View 9 Replies
View Related
May 14, 2011
I have ordered a new computer with 2TB SATA disk. The first step I must do is to partition a disk.As far as I have been reading tutorials on this site it is recommended to separate Windows/ programs and Documents into separate partitions. So I am going to create C- partition for Windows and Program Files of about 100MB.What about the other partitions. Is it worth to create separate partitions for say for "Images", "Documents", "Development Projects". Or is it better to put all this stuff into one partition? Advantage of multiple partitions, as I see, would be more flexibility for backup/recovery. From the other side, disadvantage of multiple partitions would be not optimal usage of disk space.
View 9 Replies
View Related
Feb 16, 2011
FYI: whenever I download games, applications and multimedia, I store it or install it in D: leaving C: with enough space as much as possible thinking that it's good if C: is not loaded with programs and files since OS is stored there.
View 7 Replies
View Related
Mar 9, 2011
I am curious if there are any recommended system tuning software for 64 bits windows 7? I come across Advanced System Optimizer 3 and PCKeeper. I have not tried either of them but I have heard a few bad reviews for ASO.
View 7 Replies
View Related
Aug 7, 2011
I have tried both ThunderBird and Postbox Express..But both of them cannot import my folders in hotmail..Tried many methods but it didnt wotk out too well.
View 1 Replies
View Related
Feb 2, 2011
can anyone tell what is the most recommended mode ?For example WPA-PSK ,WPA2..
View 6 Replies
View Related
Feb 13, 2012
I'm from the old school days of using only spybot s&d and ad-aware but knowing times change and all, looking to get more current and clean my PC back up in the process. In doing a little research I'm using these programs and would like some further recommendations. What do you use? What would you recommend?
1. Spybot (better alt ?)
2. Ad Aware ( better alternatives perhaps?)
3. Tuneup Utilities
4. Malware Bytes
5. Diskeeper
View 1 Replies
View Related
Apr 17, 2011
As far as I know the 64 bit version uses more memory than than the 32 bit version, also the programs on that version use more memory than on the 32 counterpart.It is also my understanding that the difference is about 40%-50% of more memory intake.So, if the 32 bit version can use up to 3.25-3.75 GB RAM out of 4GB, and the 64 bit version uses effectively equivalent of about 2 GB out of 4, then why is this version recommended for anything less than 8GB?
View 9 Replies
View Related
Jan 3, 2012
I have a Dell E197FP Monitor I hooked up to my new Windows 7 box. Windows won't give me a resolution over 1280 x 1024, even though I was running at a higher resolution on my XP system before. I know Win 7 supports higher resolutions, because it gave me higher options when hooked to a CRT monitor I used first.
View 1 Replies
View Related
Apr 6, 2011
I've got a windows 7 x64 machine and I need to migrate it to another hard disk. Currently its running on an old 160GB IDE (i know....) and I want to migrate the install to a pair of 500GB WD SATA2 drives.I know how to mirror the disks, but I need to find a way to migrate without a re-install. It's a long time since I did anything like this on windows (It's so easy on other OSs).I'd like to partition the new disk (say, 40GB) and migrate the current system to that. Then add the second disk and mirror it, create the second partition etc. So...what are the recommended ways to migrate a system to a new disk?
View 4 Replies
View Related
Jan 15, 2013
I want to repartition my HDD which has a capacity of approximately 80 GB, but it is shown as 74.5 GB in windows disk management app. I have split the hard drive into 3 partitions of equal size each of 24.8 GB and installed windows 7 ultimate (32-bit) on one partition, and the other two are for my data (including documents, music, videos, pictures etc.). In my opinion, 24.8 GB partition is not enough for Windows 7 because it is the only OS that I use and as I install updates and service packs etc, it fills up gradually and leaving only a few GBs of free space left on the Win 7 partition.
View 7 Replies
View Related
May 28, 2012
I have just recently acquired a flash-drive and have been curious as to how to encrypt some files on it. The key word being some.It's a large drive (8GB), and will be used for many different things. I want an area on the drive to be used to transport/hold personal documents which I wish to have encrypted.I have tried software like TrueCrypt which decided to use the whole drive, and didn't seem to work properly anyway (?)I want something that acts like a 'safe', I double click it, I enter a password, I access the files.I need the software to run strictly from the stick, without the need for Admin' Privileges and for it to work on most operating systems (2000 and newer)... I understand I could use old fashioned password protected/encrypted .zip's.... but I don't know if Windows can natively read these without the need of say 7zip or WinZip.
View 1 Replies
View Related
Oct 1, 2009
What is the recommended partition size for Windows 7 Home Premium?
View 18 Replies
View Related
Jul 15, 2009
So what i want to do is change my key functions on my keyboard (example: rather than ctrl-c i want to use command-c "aka windows-c")but i don't want to change the command key to be ctrl but make it so windows recognizes it as copy when i push command-c also want to change other stuff like ctrl-alt-del and paste and closing windows
the reason i don't want to change command to ctrl is if im in an application that i need to control i want to be able to hit the actual ctrl key.
i basically want to make my windows feel a little more like macintosh not in the way of looks but function of keys. hope it makes sense and hope someone knows how to do it.
View 1 Replies
View Related
Nov 2, 2012
please does any one know how to add spell check function to right click. When filling out online job application for example on XP I had spell check option on right click but do not on windows 7.
View 3 Replies
View Related
Apr 12, 2012
I want to adjust my screen resolution to 1680 x 1080 (recommended for 17" Laptop). But the only option available is 1366 x 780. How do I get additional options?
View 4 Replies
View Related
Jan 5, 2012
Having problems with the Sleep, Restart, and Shut Down functions after struggling trying to get a defective external disk drive enclosure to work.When I use any of the above functions the computer shuts down. I cannot wake by moving or left clicking the mouse as before. The computer shuts down and will not come on with the front panel power button. Ditto for Restart. I have to pull the power cord for about a minute before reconnecting. Then I press the power button and the computer commences to boot and windows initializes very slowlyI restored the computer to an earlier time before using the defective external drive enclosure, but I still have the same powerup/boot symptoms. stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 4 Replies
View Related
