Option To Choose Audio Device For Specific Program?

Feb 19, 2012

I'm going to preface this with the fact I have a USB headset, is a logitech G35). The way it works is this. I'm playing SWTOR lately, it doesn't have an audio option to choose the audio device. When I played LOTRO, what I would often do is set it to play the audio through the speakers when I was on skype (or vent) so I didn't have to wear my headphones, as it tends to hurt after too long. I put the audio through the speakers (which I can do with skype) and just set them down on the desk to use the mic that way.

However, because SWTOR doesn't have an option to change the device that the audio plays through it automatically goes through the headphones. Now normally it wouldn't be a big problem because I'd just change the program to use the speakers but I can't in this case, so I was wondering if there is a hardware or software way to override that. because they are a USB set, you can't even just not plug in the speaker plug. I just have standard onboard sound, its just saying "HD Audio", its from a Gigabyte P55M-UD2 motherboard.

View 2 Replies


ADVERTISEMENT

Setting To Choose Or Not To Choose Specific Countries

Jul 2, 2012

I know there is a setting to choose or not to choose specific countries, but I don't know how.(Yes, Europe is not as free as you think and you need to change your identity to view what third world countries can view!)

View 2 Replies View Related

Booting From Specific Partition (Windows 7) - No Option On Start Up

Dec 21, 2011

I recently made a separate partition on my HD (C), let's call it F. I wanted to load up windows xp onto that small partition, F, so as to see if it would allow me to operate better, as I have a gaming laptop that seems to be suffering from a memory hog svchost. Anyway, now that I've booted up to the F partition and working in XP, I find that I dislike it, I also can't figure out how to connect to the internet. My issue is, I can't figure out how to boot to the C, my Windows 7, the original OS. I'm not given an option upon startup and I can't find anything in my BIOS that is obviously pertaining to my issue.

View 14 Replies View Related

MBR Fix Program To Choose Which OS To Boot?

May 12, 2012

I have windows 7 installed on laptop, i had to install XP on a partition in order to do something i cant in w7, now xp starts..I used to know of a program that could be run from within windows that would let you add OS's to the boot menu and choose a default but i cant remember its name, it was dead simple to use other stuff I see is more complicated, i just want to use that simple little program.

View 9 Replies View Related

How To Choose From Multiple Audio Streams In WMP 12 ?

Oct 27, 2009

I've installed shark007 codec pack, now wmp plays everything, but when I try to play avi file with more than 1 audio stream, all of them bigin to play simultaneously, creating a huge mess. Am I able to choose just 1 stream in WMP as I can in media player classic, etc.?

View 2 Replies View Related

Automatically Choose The Appropriate Program To Open Files?

Oct 28, 2010

We have Windows 7 on one of our office computers. However, I cannot figure out how to get the computer to automatically choose the appropriate program to open files. Every time we get a file in with a new extention, we have to browse and look for the program..

View 2 Replies View Related

Command To Choose Windows 7 Program To Run On Starting Up?

Oct 19, 2011

I would like to know the windows command to select only a few programs to run on start up , not the the default programs

View 9 Replies View Related

Choose The Device That Volume Media Keys Control?

Oct 29, 2011

Specifically, this applies to the Logitech G510 keyboard, but concerns any compound HID device with media keys and USB audio.

In Windows 7 (Ultimate x64), it seems the default behavior for handling volume changes from media keys is to apply them to the default audio device. That is, unless the device sending the volume keys happens to also contain a soundcard, in which case Windows applies the volume changes to the device. On the surface this makes sense, but in practice it can be mildly annoying to some people. Consider the case with my keyboard: on most days, I have a plain old keyboard with media keys. My media keys control iTunes in the background and change my default system volume. Works great. But my keyboard has ports for a headset w/mic. When I plug in my headset my plain old keyboard is now keyboard+media keys+playback device+recording device. Now, Windows decides volume media keys originating from the keyboard should be applied to my headset volume. Bummer.

This is what I'm looking to change. I want the volume keys to continue affecting the default playback device (my headset has inline volume control). I'm hoping it's just a registry edit, but I'm willing to pick apart whatever I have to to make the change.

PS: It may be worth noting this only applies to media keys using USB scan codes. If the device happens to use the PS/2 scan codes for Mute, Vol Up, and Vol Down the changes are applied to the default playback device. This provides another alternative way of changing the behavior: if I can remap the action taken for the USB scan code to the action taken for the PS/2, it would also accomplish what I'm after.

View 2 Replies View Related

No Audio Output Device Installed/ Audio Device Disabled?

Aug 7, 2011

I have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details

View 10 Replies View Related

"Always Show Icons Never Thumbnails" - Folder Specific Option?

Mar 28, 2011

Trying to figure out a way to display thumbnails in certain folders (ie: Photos & Videos) and icons in others. Unfortunately it seems this isn't possible, as the only option I've found is to always show thumbnails in all folders or always show icon's.

View 1 Replies View Related

Turn UAC Off For A Specific Program

Nov 11, 2009

Can you turn UAC off for a specific program that you use regularly?

View 3 Replies View Related

Pick A Specific Program To Run In Safemode?

Aug 10, 2010

I'm curious if there is a way to run a specific program when I choose to reboot into safemode with networking?

Specifically looking to run or make sure the service for Logmein starts. The work I have to do would be best done in safe mode, and of course connecting remotely would be great.

View 3 Replies View Related

How To Undo Permission For A Specific Program

May 29, 2011

I know that the answer to my question is easy, but when it comes to working with Permissions, I am an absolute dud. Anyway, I have two programs that I want to have open automatically when I boot up, Thunderbird and Maxthon. I have placed their shortcuts into the Startup folder. They do open, but when Maxthon opens, the User Control Box opens asking to allow program to make changes to the computer. This is my mistake in that when I set up Maxthon I inadvertently must have clicked a button that directed a permission OK. But, BTW, Maxthon shortcut->Properties->Advanced button->run as admin NOT checked??? I would like to undo the permission request so that Maxthon will open on boot up without having to do anything.

View 4 Replies View Related

Accidentally Set Default Specific Program

Dec 4, 2012

In the 'open with' context menu, I accidentally changed the running program for ALL the icons on my desktop . So now, all the icons on my desktop are identical and all of them run using the same program

View 5 Replies View Related

[MEMORY] Unable To Install A Specific Program?

Nov 22, 2010

I installed windows 7 to my inspiron 1720 which had Vista, everything was fine installing the new operating system. The problem starts when installing any program the computer set as default installation path the Recovery disk D which has my operating system. But installing Microsoft Office wouldn't fit in since there is not enough room and for any program. So I went and change the directory path before installing the programs to the disk C, and I have installed 4 other programs in the disk C but that specific program (Microsoft Office) doesn't install, is like the computer is still redirecting it to the disk D which is full.

View 3 Replies View Related

Schedule A Program To Exit On A Specific Time?

Jun 16, 2011

if windows 7 has a built-in feature that allows a program to exit automatically, let's say, every 5pm at night.

I know that there's a scheduler to start a program, but not sure if it works to turn off a program? The reason I want to know is that I sometimes forget to log off my MSN, YM, Gtalk, etc from my workplace.

View 3 Replies View Related

How To Make Program Use A Specific Internet Connection

Aug 3, 2012

say i got 2 NIC, 2 internet connection, how can i bind my program (torrent/IDM) to use the specific internet line?

View 1 Replies View Related

Stream A Specific Video Program To Computer?

Nov 2, 2012

i want to stream a specific video program to my computer. their specs say that abobe flash player on 64 bit is not compatable. i have windows 7 64/32 bit. will this work. or what do i have to do.

View 1 Replies View Related

Stream A Specific Video Program To Computer?

Nov 2, 2012

i want to stream a specific video program to my computer. their specs say that abobe flash player on 64 bit is not compatable. i have windows 7 64/32 bit. will this work.

View 4 Replies View Related

Can Limit The USB Port To Only Allow A Specific Brand Of USB Device

Mar 27, 2012

Can you limit the USB port to only allow a specific brand of USB device

View 4 Replies View Related

Start Program At Boot / Login For Specific User

Aug 7, 2011

I've searched and searched but I can't seem to find a working solution. I want to start a program on boot/login (Windows 7) for a specific user. The program in particular: WAMP (for web development).Is it possible to start a program on boot/login for only a specific user, and not every user account.

View 3 Replies View Related

Changing Speaker Format When Launching Specific Program?

Nov 15, 2012

A program I have installed (Dead Rising 2: Off The Record) Fails to start, unless my speaker format is set to 24 bit, 48000 Hz Mode. My speaker format is normally 24 bit 192000 Hz Mode. I want to be able to make it automatically change to-and-from automatically, as the program is launched.

View 2 Replies View Related

Make A Link On Desktop / To Open It With A Specific Program Rather Then Default?

Aug 15, 2010

Is it possible to make a link on the desktop, or elsewhere, and when opened, to open it with a specific program rather then the default? Specifically, I use FF as my default browser, but I would like to use IE for a couple specific links. I know I can just open IE but it would be convenient to create an icon/link on the desktop to the location, and when opened, to be opened by IE rather then the default program for that extension (FF).I just realized that I could make another extension, a new one not used by any program, and just make that extension opened by IE by default then rename the link on the desktop, I think that would work, but is there a way to edit the link and tell it specifically what program to use when clicked rather then the default?

View 2 Replies View Related

Open A Program Using The Open With Option And It Changed The Icons For Every Program?

Sep 6, 2010

I tried to open a program using the open with option and it changed the icons for every program on my laptop. I changed the desktop (network, my computer etc) icons back to default but can't manage to change the others. If i go into properties for the program and change it that way it doesn't do anything.

View 2 Replies View Related

Third Party Partitioning Program The Only Option?

Sep 15, 2010

I set about creating a new simple volume on a brand new laptop today. You know - they come with one giant C: drive. We want a nice, manageable C: drive for imaging, about 75 - 80GB, but 100 or 125 would do.Ran up against the "fixed files" limit on shrinking the volume - could only claim 225GB out of 488GB.I'm wondering- could I (temporarily) turn off the page file, delete all restore points and turn off monitoring, and check for and delete any hibernation files - defrag - and gain some significant ground? Or is a third party partitioning program the only option, as Brink has stated in his tutorials?

View 2 Replies View Related

If Remove/uninstall 'High Definition Audio Device' Driver In Device Manager Will Windows Update Find It Again

Feb 11, 2012

If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%

View 2 Replies View Related

Can't Add A Right Mouse Program Option To The Folder File Type

Oct 10, 2011

In XP when I chose Folder options and then the File types tab, Folder was listed as a file type (Extension=None). I could select it, click the Advanced button and add a program to that file type. I would add the phrase CommandPrompt connected to the program cmd.exe. This then would allow me to right click on a folder and open the DOS window at that location. A big time saver for the work I do. I cannot find how to do this in Windows 7.

View 2 Replies View Related

Unable To Open (Uninstall Program Option) Through Control Panel

Jul 9, 2011

I am unable to open "Uninstall a program" through control panel. Every time when I try to open it, I get the following error message"

"Windows cannot find '::{26EE0668-A00A-44D7-9371-BEB064C98683}...:{7B81BE6A-CE2B-4676-A29E-EB907A5126C5}' Make sure you typed the name correctly, and then try again".

However, I can open this in safe mode. Unsure why this is the case. I use Win 7 64bit.

View 10 Replies View Related

Choose The Program To Open This "End"?

Sep 16, 2012

Everytime i start my computer this always appear.

View 1 Replies View Related

Audio Device Fine, No Audio From Windows?

Feb 27, 2012

I turned my computer on to find no audio playing. My main audio device plays bac audio from DAW just fine but if I load a video in WMP i get a code C00D11B1. If I try to play a test tone in the sound settings I get "Failed to play test tone". I have other audio devices connected and also get the same errors which makes me think this is a registry error or some windows communication error. The only thing I think might have caused this is when I was trying to get my ram to run at 1866. This is a new build and the ram should run at this speed as it is in the QVL but that is another issue. I should also mention that I have tried reloading the device drivers, updated the BIOS, and restyored windows from a previous state with no change.

Asus sabertooth 990fx
Fx-8120
4x 4gb g skill Sniper
Visiontek HD 5770
2 seagate barracudas in RAID 0

View 2 Replies View Related

No Audio Device On Device Manager

Sep 27, 2011

I installed Windows Vista using my computers recovery disk. Everything was working fine until I updated windows. After the last restart (after the updates) I notice that I am getthing this icon on the bottom right:And if I try to open the Volume controls it opens this window:I removed Windows Vista and now Im using Windows 7 (and thats why I came to this forum) in the hopes that it would fix the issue but it didnt. On Device manager I have no Sound devices:

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved