A program I have installed (Dead Rising 2: Off The Record) Fails to start, unless my speaker format is set to 24 bit, 48000 Hz Mode. My speaker format is normally 24 bit 192000 Hz Mode. I want to be able to make it automatically change to-and-from automatically, as the program is launched.
View 2 RepliesBasically whenever I try to launch a specific program (Autodesk 3ds Max 2010 64-bit to be precise), I receive the following error message:
"There is no disk in the drive. Please insert a disk into drive DeviceHarddisk1DR1"
[ Cancel | Try Again | Continue ]
This error has only occurred recently, I have had the software installed for about six months with frequent use with absolutely no trouble. I have made no significant changes to my computer in the last couple of weeks (the last time I used the program) to the best of my knowledge. The software is a legit copy from Autodesk installed from a CD/DVD. I have ran a virus check with no results. I completely uninstalled and did a fresh re-install of the software and the problem still persists.
I just discovered the task scheduler and I am using it to start programs at logon, like eraser. The only problem is I would like to start them minimized and I can't quite figure out how to do that. I have set the program properties to run minimized but it doesn't want to play nice. Is there anyway I can get the program to launch from task scheduler without using a bat file?
View 7 Replies View RelatedCan you turn UAC off for a specific program that you use regularly?
View 3 Replies View Relatedusing windows 7, I recently sent a picture with print (attatched it to email) it was sent in jpg and sender could open it today I sent a similar document w/picture (saved the very same way, or so I think) and it was unreadable in ccf mode.
View 8 Replies View RelatedI'm curious if there is a way to run a specific program when I choose to reboot into safemode with networking?
Specifically looking to run or make sure the service for Logmein starts. The work I have to do would be best done in safe mode, and of course connecting remotely would be great.
I know that the answer to my question is easy, but when it comes to working with Permissions, I am an absolute dud. Anyway, I have two programs that I want to have open automatically when I boot up, Thunderbird and Maxthon. I have placed their shortcuts into the Startup folder. They do open, but when Maxthon opens, the User Control Box opens asking to allow program to make changes to the computer. This is my mistake in that when I set up Maxthon I inadvertently must have clicked a button that directed a permission OK. But, BTW, Maxthon shortcut->Properties->Advanced button->run as admin NOT checked??? I would like to undo the permission request so that Maxthon will open on boot up without having to do anything.
View 4 Replies View RelatedIn the 'open with' context menu, I accidentally changed the running program for ALL the icons on my desktop . So now, all the icons on my desktop are identical and all of them run using the same program
View 5 Replies View RelatedI installed windows 7 to my inspiron 1720 which had Vista, everything was fine installing the new operating system. The problem starts when installing any program the computer set as default installation path the Recovery disk D which has my operating system. But installing Microsoft Office wouldn't fit in since there is not enough room and for any program. So I went and change the directory path before installing the programs to the disk C, and I have installed 4 other programs in the disk C but that specific program (Microsoft Office) doesn't install, is like the computer is still redirecting it to the disk D which is full.
View 3 Replies View Relatedif windows 7 has a built-in feature that allows a program to exit automatically, let's say, every 5pm at night.
I know that there's a scheduler to start a program, but not sure if it works to turn off a program? The reason I want to know is that I sometimes forget to log off my MSN, YM, Gtalk, etc from my workplace.
say i got 2 NIC, 2 internet connection, how can i bind my program (torrent/IDM) to use the specific internet line?
View 1 Replies View Relatedi want to stream a specific video program to my computer. their specs say that abobe flash player on 64 bit is not compatable. i have windows 7 64/32 bit. will this work. or what do i have to do.
View 1 Replies View Relatedi want to stream a specific video program to my computer. their specs say that abobe flash player on 64 bit is not compatable. i have windows 7 64/32 bit. will this work.
View 4 Replies View RelatedI've searched and searched but I can't seem to find a working solution. I want to start a program on boot/login (Windows 7) for a specific user. The program in particular: WAMP (for web development).Is it possible to start a program on boot/login for only a specific user, and not every user account.
View 3 Replies View RelatedI'm going to preface this with the fact I have a USB headset, is a logitech G35). The way it works is this. I'm playing SWTOR lately, it doesn't have an audio option to choose the audio device. When I played LOTRO, what I would often do is set it to play the audio through the speakers when I was on skype (or vent) so I didn't have to wear my headphones, as it tends to hurt after too long. I put the audio through the speakers (which I can do with skype) and just set them down on the desk to use the mic that way.
However, because SWTOR doesn't have an option to change the device that the audio plays through it automatically goes through the headphones. Now normally it wouldn't be a big problem because I'd just change the program to use the speakers but I can't in this case, so I was wondering if there is a hardware or software way to override that. because they are a USB set, you can't even just not plug in the speaker plug. I just have standard onboard sound, its just saying "HD Audio", its from a Gigabyte P55M-UD2 motherboard.
I have an avi video that I want to trim. But when I use movie maker and trim, I don't see an option to simply re-save it as an avi video. It seems I have to convert it to mp4 or wmv. Anyway to keep it as an avi?
View 2 Replies View RelatedIs it possible to make a link on the desktop, or elsewhere, and when opened, to open it with a specific program rather then the default? Specifically, I use FF as my default browser, but I would like to use IE for a couple specific links. I know I can just open IE but it would be convenient to create an icon/link on the desktop to the location, and when opened, to be opened by IE rather then the default program for that extension (FF).I just realized that I could make another extension, a new one not used by any program, and just make that extension opened by IE by default then rename the link on the desktop, I think that would work, but is there a way to edit the link and tell it specifically what program to use when clicked rather then the default?
View 2 Replies View RelatedI went to the "recording" tab in my DVD burner's properties, changed the drive from C to D. Now there's a folder called "Windows Burn Temp Files" in my D drive. But the problem is, while burning, files are still being copied over to C in a temporary folder there. Shouldn't it be copying to D:Windows Burn Temp Files instead? Example, when I cut paste some files from D drive on to the DVD drive before burning, it should be instantaneous, as the temporary files should also be shored in the same drive, D. But this is not happening.
View 2 Replies View RelatedI recently purchased DELL N5050 laptop. I installed Windows 7 Ultimate OS on it. I installed all the drivers required from this link: url...But whenever i play any media (viz., audio/video), only front-right speaker sound playing can be heard. The front-left speaker does not work. Its a brand new laptop. I tried re-installing all the drivers (which i thought may not have been installed properly).
View 2 Replies View RelatedWhen I right click a photo and click "edit", I would like for it to use Paint instead of whatever that default program is.
How do I do this?
I used a very simple program in August when the RTM first came out to change the logon screen without having to deal with the registry. Now I can't find it; it was something that didn't require installation, because it doesn't appear in the start menu. Just needed to point to the jpg I wanted and it changed it for me. Can someone point me in the right direction?
Eh, I just found it online again: Windows 7 Logon Background Changer - Customize your Windows 7 welcome screen wallpaper.
I bought a SSD 60GB and installed Windows. I have a 1TB storage drive, but I want everything to be defaulted there. I changed registry so that "Program Files" is default on the storage drive. But here is what is happening, I'm installing for example AI SUITE II to that directory, but it's still creating ASUS stuff on the SSD drive? Is there any way to get all parts of the program installed to the data drive?
View 1 Replies View RelatedWhenever I open Google Chrome, it opens really close to the bottom of the taskbar, and I always have to manually drag it into the center of the screen and maximize it. How can I set it so that automatically opens in the center of the screen?
View 6 Replies View Relatedi am trying to extract this zip file but i get the following, "Permission denied. The administrator rights are required to run this tool" I can open up grub4dos zip file but not the usb disk storage format program..
View 6 Replies View RelatedCurrently my Windows 7 is on the C drive, now my question is this: Is there a way I can say put in a SSD, then copy my entire windows and the Programs Files, Program Files x86 and the users folder to it, then switch my old HDD to the D drive and the SSD to the C and have it work just fine? Is there an easy way to do this? or will it require me to reinstall windows to do it? Been thinking about getting a 120 GB ssd for my os/program drive, and using my 1.5 tb drive as storage.
View 3 Replies View Relatedmy scree won't work since i changed some settings in a program called catalyst control center
View 1 Replies View Related1. I Want to Make Slideshow For Birthday Gift. Recommend The Programs ? .. Now I Use Photodex ProShow
2. I Need This Slide Format
Pictures --------------------------------->>
Birthday Text
<< -------------------------------- Pictures
looking for a free version of something like this Memory Card Recovery Software to Recover Lost Photos - CardRecovery that will allow me to recover a bunch of HD video clips that were mistakenly erased
View 3 Replies View RelatedI just installed windows 7 and my speaker phone does not work how do I cghange to speaker phone?
View 1 Replies View RelatedSo i'm having a problem with my mothers Gateway, i unplugged it to plug my aunts new computer in and install quick books intuit software and when i plugged the gateway back in it brings the main "Gateway logo" up and that's it nothing else wont let me boot to the boot menu or bios or a CD or a USB stick, i booted the HDD onto another computer wiped it and all and nothing at all..
View 8 Replies View Related[CODE]A friend spent an afternoon troubleshooting and established that it was indeed installed on the system, but was not launching. Her assessment was that it seems to "be pointing at the Installation exe".All attempts to remove and reinstall have failed. I am the administrator, as required.
View 2 Replies View Related