New Case For Dell Computer?
Oct 21, 2012I wanted to buy a bigger case for my computer so I can upgrade my psu and get a full size graphics card will my motherboard fit inside any standard case?
View 8 RepliesI wanted to buy a bigger case for my computer so I can upgrade my psu and get a full size graphics card will my motherboard fit inside any standard case?
View 8 RepliesComputer Freezes When Case Is touched My case is a Corsair 800D and I have built computer for a very long time. I have never experienced this before and want to know how to address this issue. Tomorrow I am going to reseat the MB as my first step in trying to fix this issue. Look at my system specs to see the complete build.
View 9 Replies View RelatedI just bought a new computer case for my computer and moved [almost] all of my computer parts into it. It's a smaller case so one of my storage HDDs had to become an external, no big deal. The OS is Windows 7 Professional x64, it was installed on a pair of SATA drives on a RAID-0 array.
Before power on, the only storage devices connected to the computer were those two SATA drives in RAID-0 and a DVD burner. I went into the BIOS setting to make sure the boot order was fine (it would check the DVD burner first and then the RAID-0 array).
The first message that came up was: Reboot and select proper boot device
A little shocked, I disabled the DVD burner and forced the computer to boot strictly from the RAID-0 array. Got the same message.
My heart was racing a little at this point and I booted up the Windows 7 DVD and ran chkdsk /r in the command prompt. But before the command prompt showed up, you would see a list of what operating systems are installed. The list was empty. There's also an 'add drivers...' option which I briefly tried but it seems Windows 7 already had the necessary drivers. IN FACT, I was able to browse through the files in my RAID-0 array via the "browse for driver" window. Everything was there. Anyway, the chkdsk completed and there were no problems. Clearly, my OS was still in the RAID-0 array but it won't boot for some reason.
The next thing I ran the startup recovery tool on the Windows 7 DVD. The report showed that the root cause was an invalid entry in the partition table and apparently the tool repaired it. I rebooted and the Windows 7 DVD's "push any key to boot from DVD..." prompt came up. I ignored it and I got the following message: Missing operating system
I checked BIOS again to make sure my RAID-0 array was still in the boot order which it still was. I also disabled the DVD burner again and rebooted directly into the RAID-0 array. Got the message: Reboot and select proper boot device
It's as if the startup repair tool did nothing at all!
Again, I was still able to browse the files on the array through the repair tools on the Windows 7 DVD. It just won't boot the operating system for some reason. Another thing to note is that the OS install is GPT based, with roughly 100 MB for the "System Reserved" partition and the remains used for the actual OS. Not sure if that matters.
Regardless, I needed this computer running for the work I have to do today so I did a format/re-install overnight. Fortunately it's just my OS/Programs that I lost.
I'm just wondering if anyone ran into the same issue and was able to fix it. I have to install new cables and a new PSU later this week so I might run into the same issue again.
I have a desktop (IDE/PATA) running Umbutu 12 and our laptop (SATA) craped out but the OS is fine (it the CPU that died.) So I slapped it into a usb case and plugged it into desktop.
with the IDE unplugged it boots to Windows so I know that works. but with the IDE in it boots to Umbutu i have modified the bootloader so there is a choice to boot into one or the other. But when I boot windows I'm getting a loop of "windows is loading files..." then reboots. I know when in the laptop i can get to the user screen but not in the desktop.
I've migrated the drive between laptops before but it doesnt work this way
Summer is coming up and I want to get started on my summer project plans, notably, my compulator case. Last summer, I rebuilt the case, now I'd like to expand further some. My first question I'd like to pose is about fan noise. I currently have two Vantec 92mm Tornadoes running, but on the 5V, the sound of them on 12V is demonic simply put (need a fan controller). My intake fan on the bottom front of my case is inset about three inches.
View 6 Replies View RelatedI've just got a Nzxt Phantom full tower case and I love it but the fans are bit loud to my liking so I'm looking to replace the 200mm top fan with a quiet but fast blue LED fan.This is the fan I have in currently (the default case fan)
NZXT FS-200 Enthusiast Silent Case Fan - 200mm [FS-200RB]
Having a difficult problem with my internet connection and I still haven't been able to isolate the problem. My ISP was no help at all and I'm stuck with getting constant error 101. Been reading around and still haven't been able to find an answer.So far I've tried the usual troubleshooting from power cycling, resetting, and switching out the modem. I've tried ping and speed tests and everything looks to be fine.I'd have to click a link or refresh several times before I can actually to get to the webpage, though if I were to leave it there I'd get the error 101. It's also affecting my Steam program where the main store page would get 3 different errors. error 101, error -7 and another one i can't seem to remember.It worked fine several days ago, and I've even tried reformatting my hard drive and still no luck. I've checked the proxy thing and tried /flushdns. This is happening across multiple computers so I figured it wasn't just mine. The ISP said that they see no problems on their end and everything looks fine.
View 6 Replies View RelatedLooking at buying a new PSU as mine is only 375 watts and am adding new components. With a lot of the newer psu's the fan is on the top of the unit and not the back like mine. As I have no way to mount the psu at the top of the case (my case and board are both btx). I also have no vent holes at the top of the case. So am I able to mount it at the top with the fan blowing down? Will this cause any heat or ventilation issues in the case itself?
View 9 Replies View RelatedHow can i remove my Western Digital CASE i want to take the hard disk and plug it into my Pc and see if i can view my files cause i don't want to lost them
View 9 Replies View RelatedI recently got a brand new computer case and today when I inserted external HDD, the computer reseted itself.HDD is working fine in motherboard USB ports, but when I want to connect the HDD device from front panel, the screen suddenly goes back and computer restarts.In device manager there is no problem discovered.It resets even if I touch the USB port with the HDD connector.It can't be short circuit right?
View 9 Replies View RelatedI moved recently to a new place, and hooked up my desktop PC. However, for some reason, there now seems to be a faint electric current running over my PC case. If I press my finger against the metal case, I can feel a tingling sensation which becomes painful if I hold my finger against it for too long. I've never had this problem before. I tried Googling my problem, and only found this thread: [Solved] Electric current felt all over the case - Power-Supplies-PC-Cases-Case-Mods - CPU-Components, I seem to be having the same problem as him. I also have the same case (Cooler Master nVidia edition chassis). Does this have something to do with my case not being properly "grounded"?
View 9 Replies View RelatedI was given an case for an HP computer a while back. It seems only one or two years old. It has most of the original case parts within it, along with some wires. Now, a friend of mine has an smaller computer in a Mini-ITX case, and has been looking to upgrade both his power supply and his graphics card. However, most graphics cards don't seem small enough to fit within his case (height wise, at least. He has enough room in both length and width), and there's only a select number of Mini-ITX power supplies on Newegg (and the highest wattage is 400w). Logically, I figured he'd be able to take my extra case and fit everything else in there, but I was unsure if it would fit properly.
View 1 Replies View RelatedI just got a Corsair 800D case and I am looking for a nice lighting kit for it.
View 4 Replies View RelatedI am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
View 1 Replies View RelatedEveryday I upload some files to my website and to simplify my website operations, I use the same filename and just upload a file with new information every day. The case of file extensions is of no consequence to Windows 7, but it matters to my website. I want to standardize on one case and it doesn't matter which as long it's the same all the time. I have one app, the snipping tool, which seems to generally make files using uppercase, but I have some existing files that are lower case. I have tried to get rid of the lower case extensions by deleting the file and then recreating it with the same name. When I do, Windows changes the case from upper to lower. If I simply create a brand new file with no previous instances of that file in existence (as far as I know), then the default case is upper. How does one go about converting all existing files of a particular type to a standard file extension case, be it upper or lower.
View 8 Replies View RelatedIs there a way to make windows automatically choose "start windows normally" in the case of hard resets? I have a USB monitor hooked to the system and it does not turn on until Windows loads. but if I hard reset by accident or some other reason I can't see the screen that asks what you want to do, this only can be seen when vga/dvi is connected. I know there is a timer for the start normally, but wanted to know if there was a way to make windows not even have to ask and just know to start normally?
View 1 Replies View RelatedI am typing away whether it be an email forum reply or in note book and not noticed I've had caps on, I've done this a few times. Is there an easy way to highlight text and swap between upper and lower case?
View 9 Replies View RelatedI use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies View RelatedRecently started having an issue where once windows login screen comes up I can hear beeping coming from my case. Then once I try to login I can hear hard drive try to spin up and system will freeze every time I hear hard drive spin up (every 5-15 seconds) during login. Sometimes this persists, sometimes it goes away within a few minutes and the system runs fine but I can still hear beeping from inside the case. Other times I get either a complete lockup, a BSOD, or the computer restarts itself without any warning.
I don't have any of these issues until I install graphics drivers.
-I've tried testing memory in windows memory diagnostics w/ 4 passes it came back w/ no errors. -I tried a clean install which runs fine until I install graphics drivers(I've tried multiple different versions all have the same issue) -I tried installing a new hard drive but am still having the same issues.
I've tried to listen where the beeping is coming from but I'm having a hard time isolating it. It's fairly short, rapid and somewhat faint.
Hardware specs are: Quote: Western Digital WD Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 CORSAIR CMPSU-750TX 750W ATX12V v2.2 Intel Core i5-750 Lynnfield 2.66GHz LGA 1156 95W Quad-Core Processor MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card GIGABYTE GA-P55A-UD4P LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard w/ USB 3.0 & SATA 6 Gb/s
I have a two year old Dell PC with Windows 7. I got a virus in my computer that by phone and computer takeover Norton located in my MBR. When they cleaned it my computer will no longer boot up. Norton worked with me for three days on the problem but we were unable to fix the computer. I followed other web sites and repaired my MBR but it still will not boot up. I tried System Repair, Check point, Image, and Dell system restore and all failed. I have tried to use the Windows install CD and all I get is a black screen with a flashing cursor and then after 3 minutes the compute attempts to boot again and fails. I tried everything to try and wipe the drive from C prompt and it will not let me. I have very weak computer skills but I can follow directions and I have wiped a previous computer I owned. (I confirmed that my CD drive is working) I also should mention I have a second hard drive on my computer that I backed everything up to.
View 1 Replies View RelatedIm just wondering if Windows 7 will be compatible to a DELL x32 bit computer and a DELL 9 series ALL-IN-ONE printer.
View 3 Replies View RelatedMy xps 410 Dell computer won't turn on. What happens is I turn it on it says to start normally or startup repairs when I click startup repairs it says it can't fix it. When I start normally gets to the multi-colored flag (windows loading screen) and sits there for about 30 seconds to a minute than it either restarts or goes to a black screen and than it has yellow letters surrounded by a small blue rectangle saying "Out of range" I don't know what to do, but what I do know is that I can boot my computer into safe mode which I'm in right now (safe mode with networking)
View 14 Replies View Relatedany time appear to monitor fire wall problem
View 1 Replies View RelatedDownload vga for dell computer window 7?
View 3 Replies View RelatedI have a HP computer that needs a clean install of windows. Problem is it has windows vista. I do not have the oem disk for the hp and the restore isnt working on the computer. Sooo I took my dell oem win7 disk and just did a clean install on the computer. Worked fine didnt ask for any sort of cd key for windows upon install either, but under windows activations says it has 3 days till automatic activation... what does this mean>? Will i be ok using this? or do i need to purchase a hp oem disk?
View 3 Replies View Relatedgive me a camera of laptop
View 1 Replies View RelatedI have a peculiar problem with my lappy. Once I start it the system runs for sometime (usually for 15mins to 1-2hours) and then it suddenly hangs for 15-20mins. When the system hangs, the mouse becomes a circle and nothing seems to be moving. This problem started after I installed Spybot S & D. Although I have uninstalled S & D, the problem still persists. Currently I see some of the folders in my C drive appear like Hidden Files.
View 3 Replies View RelatedMy computer needs to have the OS reinstalled and I have a copy of Windows 7 Pro (same OS version that my Dell laptop has) but it is not the Dell Version. Will this work? No recovery CDs were made when the computer was originally purchased and, of course, they do not come with the discs anymore.
View 6 Replies View RelatedI recently bought an HP laptop, and I received a windows 7 upgrade kit. I was wondering if I could use the code on the COA that was included to install on my dell computer?
View 5 Replies View RelatedHow can I get my dell AIO printer 924 to work with HP windows 8 computer?
View 1 Replies View RelatedDoes anyone know how to removed this virus from Dell laptop computer. This is a fake antivirus program. It stop any program or application with .exe extention from running. Even Norton 360 4.0 .
View 18 Replies View Related