Moved Computer Into New Case, Now Win 7 Won't Boot

Dec 9, 2009

I just bought a new computer case for my computer and moved [almost] all of my computer parts into it. It's a smaller case so one of my storage HDDs had to become an external, no big deal. The OS is Windows 7 Professional x64, it was installed on a pair of SATA drives on a RAID-0 array.

Before power on, the only storage devices connected to the computer were those two SATA drives in RAID-0 and a DVD burner. I went into the BIOS setting to make sure the boot order was fine (it would check the DVD burner first and then the RAID-0 array).

The first message that came up was: Reboot and select proper boot device

A little shocked, I disabled the DVD burner and forced the computer to boot strictly from the RAID-0 array. Got the same message.

My heart was racing a little at this point and I booted up the Windows 7 DVD and ran chkdsk /r in the command prompt. But before the command prompt showed up, you would see a list of what operating systems are installed. The list was empty. There's also an 'add drivers...' option which I briefly tried but it seems Windows 7 already had the necessary drivers. IN FACT, I was able to browse through the files in my RAID-0 array via the "browse for driver" window. Everything was there. Anyway, the chkdsk completed and there were no problems. Clearly, my OS was still in the RAID-0 array but it won't boot for some reason.

The next thing I ran the startup recovery tool on the Windows 7 DVD. The report showed that the root cause was an invalid entry in the partition table and apparently the tool repaired it. I rebooted and the Windows 7 DVD's "push any key to boot from DVD..." prompt came up. I ignored it and I got the following message: Missing operating system

I checked BIOS again to make sure my RAID-0 array was still in the boot order which it still was. I also disabled the DVD burner again and rebooted directly into the RAID-0 array. Got the message: Reboot and select proper boot device

It's as if the startup repair tool did nothing at all!

Again, I was still able to browse the files on the array through the repair tools on the Windows 7 DVD. It just won't boot the operating system for some reason. Another thing to note is that the OS install is GPT based, with roughly 100 MB for the "System Reserved" partition and the remains used for the actual OS. Not sure if that matters.

Regardless, I needed this computer running for the work I have to do today so I did a format/re-install overnight. Fortunately it's just my OS/Programs that I lost.

I'm just wondering if anyone ran into the same issue and was able to fix it. I have to install new cables and a new PSU later this week so I might run into the same issue again.

View 4 Replies


ADVERTISEMENT

New Case For Dell Computer?

Oct 21, 2012

I wanted to buy a bigger case for my computer so I can upgrade my psu and get a full size graphics card will my motherboard fit inside any standard case?

View 8 Replies View Related

Computer Freezes When Case Is Touched?

May 19, 2012

Computer Freezes When Case Is touched My case is a Corsair 800D and I have built computer for a very long time. I have never experienced this before and want to know how to address this issue. Tomorrow I am going to reseat the MB as my first step in trying to fix this issue. Look at my system specs to see the complete build.

View 9 Replies View Related

Moved Partitions - Unable To Boot Windows 7?

Jun 2, 2010

I have an Acer Aspire 1810TZ with Windows 7 Home Premium 64-bit. The HDD is 160GB.Yesterday I moved (without resizing!) both the 100MB system reserved partition and my 40GB C: partition towards the "beginning" of the HDD for the purpose of creating an unallocated space of some 110GB towards the "end" of the HDD. (The C: partition had previously been shrunk using Win7 disk management and the system worked fine after reboot prior to partition move).llowing the partition move I can however not boot into Windows anymore. Windows boot manager gives the following info:Status: 0xc0000225Info: The boot selection failed because a required device is inaccessibleThe boot manager also suggests I reinstall Windows, but of course the restore and rescue DVDs I burned based on Acer's eRecovery tool does not work.

View 4 Replies View Related

Drivers For A Game Controller Moved To New Computer Won't Register

Apr 24, 2011

I recently plugged in a gamepad I had used on my old (vista) computer. Windows installed drivers that sort of worked but weren't as functional as my old ones. I copied the gamepad's DLL/instal folder over to this (7) computer and tried to register the dlls. Regsvr32 gave me the error: The module "name and location of dll.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "name and location of dll.dl" is a valid DLL or OCX file and then try again.None of the .exe files seem to do anything.I can't find the original installation file on the internet anywhere but the old driver name/version was: "TWIN PS TO PC CONVERTER Driver Version: 3.51(2007.01)"

View 1 Replies View Related

Migrating HDD To New Case?

Nov 26, 2012

I have a desktop (IDE/PATA) running Umbutu 12 and our laptop (SATA) craped out but the OS is fine (it the CPU that died.) So I slapped it into a usb case and plugged it into desktop.

with the IDE unplugged it boots to Windows so I know that works. but with the IDE in it boots to Umbutu i have modified the bootloader so there is a choice to boot into one or the other. But when I boot windows I'm getting a loop of "windows is loading files..." then reboots. I know when in the laptop i can get to the user screen but not in the desktop.

I've migrated the drive between laptops before but it doesnt work this way

View 1 Replies View Related

Case Mod 2 Need A Fan Controller

Jun 6, 2011

Summer is coming up and I want to get started on my summer project plans, notably, my compulator case. Last summer, I rebuilt the case, now I'd like to expand further some. My first question I'd like to pose is about fan noise. I currently have two Vantec 92mm Tornadoes running, but on the 5V, the sound of them on 12V is demonic simply put (need a fan controller). My intake fan on the bottom front of my case is inset about three inches.

View 6 Replies View Related

Best 200mm Case Fan?

Jul 4, 2012

I've just got a Nzxt Phantom full tower case and I love it but the fans are bit loud to my liking so I'm looking to replace the 200mm top fan with a quiet but fast blue LED fan.This is the fan I have in currently (the default case fan)

NZXT FS-200 Enthusiast Silent Case Fan - 200mm [FS-200RB]

View 4 Replies View Related

Bad Case Of Error 101

Sep 6, 2012

Having a difficult problem with my internet connection and I still haven't been able to isolate the problem. My ISP was no help at all and I'm stuck with getting constant error 101. Been reading around and still haven't been able to find an answer.So far I've tried the usual troubleshooting from power cycling, resetting, and switching out the modem. I've tried ping and speed tests and everything looks to be fine.I'd have to click a link or refresh several times before I can actually to get to the webpage, though if I were to leave it there I'd get the error 101. It's also affecting my Steam program where the main store page would get 3 different errors. error 101, error -7 and another one i can't seem to remember.It worked fine several days ago, and I've even tried reformatting my hard drive and still no luck. I've checked the proxy thing and tried /flushdns. This is happening across multiple computers so I figured it wasn't just mine. The ISP said that they see no problems on their end and everything looks fine.

View 6 Replies View Related

New PSU - Can It Be Mounted On The Top Of The Case Upside Down

Jun 9, 2012

Looking at buying a new PSU as mine is only 375 watts and am adding new components. With a lot of the newer psu's the fan is on the top of the unit and not the back like mine. As I have no way to mount the psu at the top of the case (my case and board are both btx). I also have no vent holes at the top of the case. So am I able to mount it at the top with the fan blowing down? Will this cause any heat or ventilation issues in the case itself?

View 9 Replies View Related

Remove Case From Hard Disk?

Feb 9, 2011

How can i remove my Western Digital CASE i want to take the hard disk and plug it into my Pc and see if i can view my files cause i don't want to lost them

View 9 Replies View Related

PC Case Front Panel USB Malfunction

Dec 18, 2011

I recently got a brand new computer case and today when I inserted external HDD, the computer reseted itself.HDD is working fine in motherboard USB ports, but when I want to connect the HDD device from front panel, the screen suddenly goes back and computer restarts.In device manager there is no problem discovered.It resets even if I touch the USB port with the HDD connector.It can't be short circuit right?

View 9 Replies View Related

Electric Current Felt Over PC Case

Aug 30, 2012

I moved recently to a new place, and hooked up my desktop PC. However, for some reason, there now seems to be a faint electric current running over my PC case. If I press my finger against the metal case, I can feel a tingling sensation which becomes painful if I hold my finger against it for too long. I've never had this problem before. I tried Googling my problem, and only found this thread: [Solved] Electric current felt all over the case - Power-Supplies-PC-Cases-Case-Mods - CPU-Components, I seem to be having the same problem as him. I also have the same case (Cooler Master nVidia edition chassis). Does this have something to do with my case not being properly "grounded"?

View 9 Replies View Related

Fitting A Micro Itx Motherboard In An Atx Case

May 10, 2012

I was given an case for an HP computer a while back. It seems only one or two years old. It has most of the original case parts within it, along with some wires. Now, a friend of mine has an smaller computer in a Mini-ITX case, and has been looking to upgrade both his power supply and his graphics card. However, most graphics cards don't seem small enough to fit within his case (height wise, at least. He has enough room in both length and width), and there's only a select number of Mini-ITX power supplies on Newegg (and the highest wattage is 400w). Logically, I figured he'd be able to take my extra case and fit everything else in there, but I was unsure if it would fit properly.

View 1 Replies View Related

Corsair 800D Case And Looking For A Nice Lighting Kit?

Aug 31, 2011

I just got a Corsair 800D case and I am looking for a nice lighting kit for it.

View 4 Replies View Related

How To Find An Internal Hard DDsk In External Case

Nov 10, 2012

I am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?

View 1 Replies View Related

Change File Extension Upper/lower Case?

Jun 2, 2011

Everyday I upload some files to my website and to simplify my website operations, I use the same filename and just upload a file with new information every day. The case of file extensions is of no consequence to Windows 7, but it matters to my website. I want to standardize on one case and it doesn't matter which as long it's the same all the time. I have one app, the snipping tool, which seems to generally make files using uppercase, but I have some existing files that are lower case. I have tried to get rid of the lower case extensions by deleting the file and then recreating it with the same name. When I do, Windows changes the case from upper to lower. If I simply create a brand new file with no previous instances of that file in existence (as far as I know), then the default case is upper. How does one go about converting all existing files of a particular type to a standard file extension case, be it upper or lower.

View 8 Replies View Related

Automatically Choose Start Windows Normally In Case Of Hard Reset?

Aug 24, 2011

Is there a way to make windows automatically choose "start windows normally" in the case of hard resets? I have a USB monitor hooked to the system and it does not turn on until Windows loads. but if I hard reset by accident or some other reason I can't see the screen that asks what you want to do, this only can be seen when vga/dvi is connected. I know there is a timer for the start normally, but wanted to know if there was a way to make windows not even have to ask and just know to start normally?

View 1 Replies View Related

Highlight Typed Text And Swap Between Upper / Lower Case?

Sep 7, 2012

I am typing away whether it be an email forum reply or in note book and not noticed I've had caps on, I've done this a few times. Is there an easy way to highlight text and swap between upper and lower case?

View 9 Replies View Related

Existing External Hard Drive Installed In New Case, Does Not Recognize?

Jan 2, 2012

I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.

View 3 Replies View Related

Crashing/slow After Installing Video Drivers, Beeping Inside Case

Oct 31, 2012

Recently started having an issue where once windows login screen comes up I can hear beeping coming from my case. Then once I try to login I can hear hard drive try to spin up and system will freeze every time I hear hard drive spin up (every 5-15 seconds) during login. Sometimes this persists, sometimes it goes away within a few minutes and the system runs fine but I can still hear beeping from inside the case. Other times I get either a complete lockup, a BSOD, or the computer restarts itself without any warning.

I don't have any of these issues until I install graphics drivers.

-I've tried testing memory in windows memory diagnostics w/ 4 passes it came back w/ no errors. -I tried a clean install which runs fine until I install graphics drivers(I've tried multiple different versions all have the same issue) -I tried installing a new hard drive but am still having the same issues.

I've tried to listen where the beeping is coming from but I'm having a hard time isolating it. It's fairly short, rapid and somewhat faint.

Hardware specs are: Quote: Western Digital WD Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 CORSAIR CMPSU-750TX 750W ATX12V v2.2 Intel Core i5-750 Lynnfield 2.66GHz LGA 1156 95W Quad-Core Processor MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card GIGABYTE GA-P55A-UD4P LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard w/ USB 3.0 & SATA 6 Gb/s

View 4 Replies View Related

Selected Messages Could Not Be Moved

Nov 17, 2009

In Windows Live Mail, when I receive junk mail, it is not placed in the junk mail folder, though it appears as unread mail. If I select the message and then click the Junk button, I receive the message "The selected message(s) could not be moved. An error has occurred." I tried removing and re-installing WLM and junk mail worked correctly for a while, but now the same problem is occurring again.

What is causing the problem and how can I fix it?

View 1 Replies View Related

Get The Data Moved Off From Sd Card

Dec 1, 2010

if I can get the data that has been moved off or essentially deleted off an SD Card by mistake. Will my Easeus recovery software recover it? I would try it but I'm afraid the SD card isn't in my possession.

View 5 Replies View Related

Moved Documents For C To E Drive?

Oct 16, 2012

So leaving my ''C drive'' with only Windows 7 operating system and all rograms,Working okay.But when it becomes to saving items it wants to go to the ''C Drive'' Now can I prevent this from happening.Would it be possible to make the new ''E Drive'' the default drive,Is that possible??, or am I thinking wrong.

View 9 Replies View Related

Log Of What Folders Have Moved In Windows 7?

Feb 5, 2012

is there a log of what folders i have moved in win7? I was condensing some files and folders and suddenly they disappeared completely.

View 7 Replies View Related

Stuff Disappeared Changed And Moved Around

Oct 15, 2012

I turned my pc off for a couple of hours today and when I turned it back on everything was different! The desktop background is different (I think it reverted to blue-white bird puffs HP one), the icons are very small, Microsoft Word 2000 was gone, Google Chrome disappeared from lower tray! In addition, history disappeared from Firefox! (that is what I have noticed - so far). What is going on??I thought maybe that was some update but the most recent update was yesterday and was about MSecurity Essentials.I googled the problem and after I typed winword.exe- I found Microsoft Word, it sort of- reinstalled itself and now it looks a bit different.I went to Program FIles 86 to reinstall Microsoft Word shortcut on desktop, and it is there, however, it doesn't look like a Microsoft logo-as before, it looks like files .Also, all my documents were gone! So I did more "googling" and was able to find my MW docs this way: Computer-C-users-me-My Documents.However, I cannot access these documents through Microsoft Word any more! I can only find them through the above route.

View 4 Replies View Related

Moved External HDD To A PC After Power Surge

Mar 16, 2012

So I had a power surge a few days ago and it fried a lot of devices in my house including my external HDD controller/charger so I removed the HDD from it's case and mounted it in my PC. So far so good, it was recognised in BIOS, my primary Master and my former ext.HDD Slave, boots up ok but when I go in the explorer I don't see the partition. I encrypted it with BitLocker when it was used as an external USB HDD.Now when I go into Disk Manager the disk is seen as online with 465 GB of unallocated space. Is there any chance I can recover the data on it ?

View 5 Replies View Related

Files And Icons Not Changing When Moved

Jul 18, 2012

Hard to describe in a short title.I have been having a few strange problems here and there with the system. Not sure if it's Malware or if I've just done something wrong.Basically whenever I move a file the icon for the file remains in place and whenever I try to move the icon Windows recognizes that it isn't there even though the icon remains, exiting and re-entering the folder which contains the icon makes it go away. Similarly whenever I empty or fill the recycling bin the icon doesn't change it's appearance until I navigate away from the desktop.I've also been having other issues.

View 9 Replies View Related

How To Get Taskbar To Remember Where Application Moved

Dec 5, 2012

I don't want to pin anything. Without pinning, can windows remember where I dragged an application on my task bar through a setting or anything? I like to have my frequently used programs available near the start button. I'm always dragging them over there after I open them. But I don't like losing the task bar real estate to pinned icons.

View 2 Replies View Related

Virus Moved Every File To Desktop?

Jul 26, 2011

When he came back EVERY file was moved to his desktop. I'm not talking about a few dozen files, or just doc. files. But files connected to programs, sample pics, txt. everything. Hundreds or even thousands of files have been moved onto the desktop, being layered on top. When we move a file to a temporary folder that has been created, others appear.

It sounds like every file had its address changed to be on the desktop. (ie C:UsersNameDesktop).

We are trying to get virus protection up (Norton is on the computer) but obviously the computer is only half working right now.

View 2 Replies View Related

Every 1/2 Sec It Would Skip From One Place To Another Whenever Moved Mouse?

Sep 3, 2011

I was wondering if someone can clear this up for me. I just finished building my 1st desktop pc ever yesterday. It's running quite well I should say. Everything is normal except I noticed my cursor is lagging. My first reaction was that "My wireless mouse must be interfering with the router." From what I remembered, it was a steady lag. About every 1/2 sec it would skip from one place to another whenever I moved my mouse. I went to Best Buy looking for a wired mouse, but hated all of them, plus I love the wireless one I still have. Instead of getting a wired mouse, I bought a dual band Netgear router.When I got home and hooked it up and all, it worked perfectly. Then probably an hour later, lag lag lag again. I messed around with the router settings quite a bit, but it's not worth it since disabling the 2.4 Ghz signal is useless. I couldn't connect to the router (and internet) when I disabled the 2.4 Ghz band.

After I got both bands up, I decided to try using an old wired mouse I had. It worked for a few minutes without lag, but it appears that wasn't the case either. So I ruled out the possibility of router interference. I tried updating all the mouse drivers, but it said it was already installed. I have also downloaded all the Windows 7 updates. There were 41 of them with a size of 114 MB. That didn't appear to help either. Right now, as I'm typing, it tends to lag every other minutes. I even disconnected the wireless connection and it doesn't appear to be the case.Loading webpages is fast as ever. I have the desktop gadgets that monitor the CPU, Network, GPU, and Hard Drives. Plus, I have HWMonitor and CPU-Z (which I need to reinstall cause the disk icon is not the correct picture).

One more thing that is very important. After the new dual band router was hooked up, the lag with both wireless and wired mouse is different from the steady lag I mentioned before. It's more unpredictable in my opinion. I can't live with it certainly as I can't see where it's going and more time is wasted trying to pinpoint my cursor destination.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved