New PSU - Can It Be Mounted On The Top Of The Case Upside Down
Jun 9, 2012
Looking at buying a new PSU as mine is only 375 watts and am adding new components. With a lot of the newer psu's the fan is on the top of the unit and not the back like mine. As I have no way to mount the psu at the top of the case (my case and board are both btx). I also have no vent holes at the top of the case. So am I able to mount it at the top with the fan blowing down? Will this cause any heat or ventilation issues in the case itself?
View 9 Replies
ADVERTISEMENT
Dec 14, 2011
As the title says i've seen guides online but they're a bit confusing. I had windows 7 on my computer before. but it got a virus and the usb that I install windows 7 with died on me. So I installed windows XP on my custom machine with a 1gb flash drive using wintoflash. But now i kinda want windows 7 back so I can play games. Is there anyway to do this.
View 6 Replies
View Related
Sep 22, 2012
I had a sudden hard drive crash and have a system image back up on an external drive.I can't remove and replace the hard drive from the computer because there is about 2 inches of space to get a screwdriver in.I plugged my external drive into a laptop and followed the procedure for attaching a .vhd file.I have two files backed up on the same evening for some reason, 54 GB and 90GB.I couldn't get the 90GB vhd to attach properly until I unchecked the read only tab, it mounted, but I couldn't access any files.I clicked on the file, it asked me to click continue with admin control to permanently give access, it takes a few mins to load...but no files to open.
View 1 Replies
View Related
Feb 10, 2012
How can I keep a VHD image mounted after reboot?
View 3 Replies
View Related
Feb 15, 2012
I have a clone computer that I built about a year ago. I put a 90Gb SSD in there and put win 7 on it. I also had 2 other hdd's in there from past computers. I was trying to use them as data disks so my ssd wouldn't get so full. Well since I never wiped them out from past computers they were getting close to full. So I took off all the data I wanted on one of the drives and then formatted that drive and mounted it to my ssd. It was working fine. Then one day I come home and turn on my computer and now it won't boot up. My SSD doesn't show up other than it being called the x: drive with only 31.4 MB on it. No kinda system restore points are shown, and a repair disk doesn't work, or even to try and reinstall doesn't work. It's like my computer isn't recognizing the ssd hard drive as my c: drive and the disk I just formatted is the disk they think is the c: drive.
View 2 Replies
View Related
Oct 19, 2012
I have lost the ability to access a mounted drive.Previously, I would mount the drive and it would immediately open, saying it was Q: shared drive...). I have never had a problem before.The drive is from a True crypt encrypted file - I can mount the drive by entering the password to True Crypt, no problem. It mounts, shows up as local disc Q:, but when I click on it, it will not open and I get a message saying 'You don't currently have permission to access this folder'.When I follow the directions to security, and access the properties, I add my user name and tick full control but it the says:An error occured when trying to share Q, access is denied. The shared resource was not created at this time.I have also tried giving permission to 'Everyone' but the same thing happens.(This is complicated by the fact I have been having other problems today.Basically,I used HP Support Assistant to download updates for my laptop, since then I cannot open the devices and printers box - it just hangs and does not populate. I have done system restores, followed instructions from this forum about turning on bluetooth support, printer spooling, resetting explorer, but nothing has worked.
View 5 Replies
View Related
Sep 21, 2011
I have two Identical hard drives [1.5T WD in external caddys with both USB2 & eSata connections]. Both have been in use since I built computer Dec10. Now I plug them in and their not visible anymore? Their shown as a usb or scsi drive but no assigned drive letter or their "name".Their showing in the Disk manager and I found I had to manually tell it to mount and assign a drive letter[then their useable]. I tried another removable drive that was USB2 & firewire and the same thing. USB2 ,eSata or firewire and their all not visable in explorer. Yet I can plug in a flash drive and I can immediately see it once loaded.Is there a switch in registry or somewhere thats controls this.All these drives were immediately available in file explorer previously? Now I am having to use the DM to manually mount and assign them to read/write to them.
View 1 Replies
View Related
Jan 30, 2013
My father got a call from "Microsoft" saying he had a virus and they got him to go to a website. After he realised it was a scam his computer screen fliped upside down and he can no longer log into his computer.
View 3 Replies
View Related
Jun 5, 2009
has anybody else had a problem with video being upside down in windows 7?
everyone of my webcam apps (yahoo messenger, fwink, webcamXP, everyone of them had the upside down video complex. it doesn't happen to me in vista - i dual boot on this asus G50Vt. all the latest drivers and every thing's up to date, as far as devices go.
so I'm at a complete loss as to what could be going on here. any suggestions?
View 9 Replies
View Related
Mar 12, 2011
I have downloaded the latest version of skype onto two laptops. Both laptops show the picture on the video cam upside down. I see there are many posts about this but have not been able to find the answer. I have windows 7 32 bit. I have skype version 5.1.0.112.
View 3 Replies
View Related
Mar 13, 2010
I have an Asus K60i running windows 7 and my webcam image is upside down. I am using my webcam on skype and I dont know how to find on my computer any settings so that I can fix this problem. Could the camera have been installed upside down?
View 9 Replies
View Related
Dec 21, 2009
How do I get my web cam to be right side up. It recently was updated and now it only views upside down.
View 2 Replies
View Related
Feb 23, 2011
I've updated my ASUS laptop (A52F Series) to Windows 7 Professional 64 bit SP1 and my camera has upside down image. The type of camera is "USB2.0 0.3M UVC WebCam" from Device Manager. I've tried to download the driver from ASUS support side but it didn't help. I searched online and it seems quite a few people had the same issue like me but I couldn't find any solution for it.
View 1 Replies
View Related
Jan 17, 2010
i know Fn + F4 temporarily solves the problem , but id like a permanent solution.
View 1 Replies
View Related
Oct 13, 2012
My husband was cleaning his computer from dust and went over the keys. the desk top then went upside down.
View 1 Replies
View Related
Jan 19, 2012
My asus u6v webcam is upside down when you are taking shots.
View 1 Replies
View Related
Mar 7, 2012
I have laptop Asus Pro 71S series. When I installed windows 7 it inverted my webcam images. How can I repair this?
View 2 Replies
View Related
Nov 26, 2012
I have a desktop (IDE/PATA) running Umbutu 12 and our laptop (SATA) craped out but the OS is fine (it the CPU that died.) So I slapped it into a usb case and plugged it into desktop.
with the IDE unplugged it boots to Windows so I know that works. but with the IDE in it boots to Umbutu i have modified the bootloader so there is a choice to boot into one or the other. But when I boot windows I'm getting a loop of "windows is loading files..." then reboots. I know when in the laptop i can get to the user screen but not in the desktop.
I've migrated the drive between laptops before but it doesnt work this way
View 1 Replies
View Related
Jun 6, 2011
Summer is coming up and I want to get started on my summer project plans, notably, my compulator case. Last summer, I rebuilt the case, now I'd like to expand further some. My first question I'd like to pose is about fan noise. I currently have two Vantec 92mm Tornadoes running, but on the 5V, the sound of them on 12V is demonic simply put (need a fan controller). My intake fan on the bottom front of my case is inset about three inches.
View 6 Replies
View Related
Jul 4, 2012
I've just got a Nzxt Phantom full tower case and I love it but the fans are bit loud to my liking so I'm looking to replace the 200mm top fan with a quiet but fast blue LED fan.This is the fan I have in currently (the default case fan)
NZXT FS-200 Enthusiast Silent Case Fan - 200mm [FS-200RB]
View 4 Replies
View Related
Sep 6, 2012
Having a difficult problem with my internet connection and I still haven't been able to isolate the problem. My ISP was no help at all and I'm stuck with getting constant error 101. Been reading around and still haven't been able to find an answer.So far I've tried the usual troubleshooting from power cycling, resetting, and switching out the modem. I've tried ping and speed tests and everything looks to be fine.I'd have to click a link or refresh several times before I can actually to get to the webpage, though if I were to leave it there I'd get the error 101. It's also affecting my Steam program where the main store page would get 3 different errors. error 101, error -7 and another one i can't seem to remember.It worked fine several days ago, and I've even tried reformatting my hard drive and still no luck. I've checked the proxy thing and tried /flushdns. This is happening across multiple computers so I figured it wasn't just mine. The ISP said that they see no problems on their end and everything looks fine.
View 6 Replies
View Related
Dec 19, 2012
My Grandchildren were playing with the keyboard on my HP lap top (windows 7) and during their manic pressing of the keys within 10 seconds had managed to turn the screen upside down, everything is there only the screen is affected.
View 4 Replies
View Related
Oct 21, 2012
I wanted to buy a bigger case for my computer so I can upgrade my psu and get a full size graphics card will my motherboard fit inside any standard case?
View 8 Replies
View Related
Feb 9, 2011
How can i remove my Western Digital CASE i want to take the hard disk and plug it into my Pc and see if i can view my files cause i don't want to lost them
View 9 Replies
View Related
Dec 18, 2011
I recently got a brand new computer case and today when I inserted external HDD, the computer reseted itself.HDD is working fine in motherboard USB ports, but when I want to connect the HDD device from front panel, the screen suddenly goes back and computer restarts.In device manager there is no problem discovered.It resets even if I touch the USB port with the HDD connector.It can't be short circuit right?
View 9 Replies
View Related
May 19, 2012
Computer Freezes When Case Is touched My case is a Corsair 800D and I have built computer for a very long time. I have never experienced this before and want to know how to address this issue. Tomorrow I am going to reseat the MB as my first step in trying to fix this issue. Look at my system specs to see the complete build.
View 9 Replies
View Related
Aug 30, 2012
I moved recently to a new place, and hooked up my desktop PC. However, for some reason, there now seems to be a faint electric current running over my PC case. If I press my finger against the metal case, I can feel a tingling sensation which becomes painful if I hold my finger against it for too long. I've never had this problem before. I tried Googling my problem, and only found this thread: [Solved] Electric current felt all over the case - Power-Supplies-PC-Cases-Case-Mods - CPU-Components, I seem to be having the same problem as him. I also have the same case (Cooler Master nVidia edition chassis). Does this have something to do with my case not being properly "grounded"?
View 9 Replies
View Related
May 10, 2012
I was given an case for an HP computer a while back. It seems only one or two years old. It has most of the original case parts within it, along with some wires. Now, a friend of mine has an smaller computer in a Mini-ITX case, and has been looking to upgrade both his power supply and his graphics card. However, most graphics cards don't seem small enough to fit within his case (height wise, at least. He has enough room in both length and width), and there's only a select number of Mini-ITX power supplies on Newegg (and the highest wattage is 400w). Logically, I figured he'd be able to take my extra case and fit everything else in there, but I was unsure if it would fit properly.
View 1 Replies
View Related
Dec 9, 2009
I just bought a new computer case for my computer and moved [almost] all of my computer parts into it. It's a smaller case so one of my storage HDDs had to become an external, no big deal. The OS is Windows 7 Professional x64, it was installed on a pair of SATA drives on a RAID-0 array.
Before power on, the only storage devices connected to the computer were those two SATA drives in RAID-0 and a DVD burner. I went into the BIOS setting to make sure the boot order was fine (it would check the DVD burner first and then the RAID-0 array).
The first message that came up was: Reboot and select proper boot device
A little shocked, I disabled the DVD burner and forced the computer to boot strictly from the RAID-0 array. Got the same message.
My heart was racing a little at this point and I booted up the Windows 7 DVD and ran chkdsk /r in the command prompt. But before the command prompt showed up, you would see a list of what operating systems are installed. The list was empty. There's also an 'add drivers...' option which I briefly tried but it seems Windows 7 already had the necessary drivers. IN FACT, I was able to browse through the files in my RAID-0 array via the "browse for driver" window. Everything was there. Anyway, the chkdsk completed and there were no problems. Clearly, my OS was still in the RAID-0 array but it won't boot for some reason.
The next thing I ran the startup recovery tool on the Windows 7 DVD. The report showed that the root cause was an invalid entry in the partition table and apparently the tool repaired it. I rebooted and the Windows 7 DVD's "push any key to boot from DVD..." prompt came up. I ignored it and I got the following message: Missing operating system
I checked BIOS again to make sure my RAID-0 array was still in the boot order which it still was. I also disabled the DVD burner again and rebooted directly into the RAID-0 array. Got the message: Reboot and select proper boot device
It's as if the startup repair tool did nothing at all!
Again, I was still able to browse the files on the array through the repair tools on the Windows 7 DVD. It just won't boot the operating system for some reason. Another thing to note is that the OS install is GPT based, with roughly 100 MB for the "System Reserved" partition and the remains used for the actual OS. Not sure if that matters.
Regardless, I needed this computer running for the work I have to do today so I did a format/re-install overnight. Fortunately it's just my OS/Programs that I lost.
I'm just wondering if anyone ran into the same issue and was able to fix it. I have to install new cables and a new PSU later this week so I might run into the same issue again.
View 4 Replies
View Related
Aug 31, 2011
I just got a Corsair 800D case and I am looking for a nice lighting kit for it.
View 4 Replies
View Related
Nov 10, 2012
I am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
View 1 Replies
View Related
