Win 7 Live Mail: Sending HTML text works okay but when I try to send a new mail or forward mail with graphics the recipient gets multiple copies of the e-mail. One is usually okay but the rest are gibberish. To work around this glitch I have registered with Gmail to use when I want to e-mail with graphics. All Windows Updates have been entered. I changed mail options to plain text with similar results. My winter snowbird ISP is Bright House Tampa Bay Road Runner, and the computer is Dell Inspiron 15 laptop.
using windows 7 64bit sp1 with windows live mail,when I got the pc it didn't have an email program installed, it advised on downloading live mail which I did, recently I have been sending photos to family but they are claiming they are receiving multiple emails but are unable to view the photos, just the placeholder,I have looked through the setting but I must be missing something,I have downloaded incredimail 2.0 but for some reason that can't find my contacts?
How can I have my mail boxes to be open on a single PC? On my iPhone, I can check my 5 email addresses without signing in and signing out. It is a pain to have 3 different hotmail addresses while signing in and signing out.
I hate to start with an apology, but I can't believe I'm the first to raise this point, so I'm sorry if it's already been done to death. But I've tried searching the forum, and couldn't find a relevant thread.My issue is this. When I'm writing a new email in Windows Live Mail, like most careful users I like to save the text every now and then. It's an instinct borne of hard experience of losing data, which can happen any time with any software. I just automatically click Cltr-S periodically without even thinking about it.Unfortunately, it appears to me that every time I do this in Windows Live Mail, the program creates a new copy of my current draft email in the relevant Drafts folder. If it's a long email, or one I'm phrasing with extra care, I can end up with maybe ten or fifteen nearly identical drafts cluttering up the folder!This behaviour seemed so bizarre when I noticed it that I trawled through the settings, looking for a way to override it, but I can't find any reference. Am I missing something obvious? I must be.
In Outlook Express (sorry to dredge up that familiar phrase), when you do what I've described above, the software behaves logically, and simply resaves the amended draft email each time over the previous version, so that you never have more than one draft copy at any time - which is how nearly all word processors also work. Surely that's how Windows Live Mail should behave too? I realise there might be occasional instances where you would want two different versions of a draft, but surely these instances are far outnumbered by the times when you just want to save a single copy incrementally as you write it?
I currently have an ATI RADEON HD 4850 in my computer, but i have an old Nvidia 6600.. something laying around. I was wondering if it would be possible to drop that in my system and use it purely for additional monitors. I dont mean to link it with my ati card cause i know that that wont work, but basically keep it separate to run a few more moniters.
Edit: not only for windows 7 but if its possible on vista too.
Am expecting to receive my copy of Win 7 tomorrow, have got my drivers ready but am wondering whether there is an issue with installing Win 7 onto a SATA drive.
Had issues when installing XP as it wouldn't recognise the SATA drive and wouldn't load the drivers either. Ended up making a slipstream disk with the drivers on which took a while to get right.
Does Win 7 install onto a SATA drive straight out of the box or will I have the same problems as I had with XP?
I have numbers in front of some my music files. Not tracknumbers. The numbers are included in the file name. (03 Sunflower or 01 - Beyond The Sea) etc. My question is, is there anyway to remove the numbers. I can do by renaming each file. Is there any to do this other than renaming one file at a time.
It's a fake computer analysis and optimization program that displays fake information in order to scare you into believing that there is an issue with your computer so you buy some program. My computer recovered back to normal, except it ran slower than usual and sounded like it was constantly loading/thinking.Within 30 minutes, my computer restarted without being prompted to do so and now it freezes every time it tries to load. I've tried all the safe modes and it freezes before loading windows.I've included two screen shots, where it freezes every time
Every time I try to use a .exe file, such as downloading or Adobe, I get the "WIS cannot be accessed, not installed properly mesage". I know it's hijacked, so I want to see if you guys know how to fix it. Enclosed is my "HijackThis log"[CODE]
Is there a way to designate what file types are able to be included in a folder? For example, I would like to create a folder that will ONLY accept Excel files.
One question I have is are the device drivers included on the windows 7 disc? I'm not sure I have a device driver disc let alone knowing what drivers I need.
i installed LibUSB-Win32- drivers so i could use iRecovery on my iPhone,on completion of installation of LibUSB my keyboard and mouse turned off, well all of my USB was disabled. so i was forced to restart, sadly same thing, login screen no keyboard or mouse, i tried in safemode, same thing. however my keyboard works in CMOS and BIOS so i know its a OS issue. and this only happened when i installled LIBUSB, i looked it up and tried manually removing LibUSB using the Win7 setup disks command prompt. i deleted LibUSB0.sys out of Windows/Systen32/Drivers so that LibUSB wont be called upon during start up, however doing this has now meant my PC will reboot after loading Windows even in safemode, the Starting Windows screen appears. fades and riight before it goes to the login screen it restarts, Safemode too. i have no Restore points and i cannot and i mean Cannot Format this harddisk, its not backed up and i have over 400GB of data i absolutely NEED.Im so stuck its not funny i have no idea what to do to get windows booting again and without this silly LibUSB stuff! i dont have aany PS./2 Ports on my mobo either!, what can i do >? Please ive asked everywhere and no one knows what i can do except reformat.
I have a new PC running W7 64bit.When I click the safely remove hardware button to remove a USB flashdrive, listed as well is the option to remove my hard drive. Is this normal? The shop that built the PC for me says it is because my hard drive is SATA, but it is still a bit disconcerting.
It would be much appreciated. Also, Im new here, So if you could tell me if Im doing something wrong it would be helpful. Heres the error report upon reboot -
Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7601.2.1.0.768.3 Locale ID:1033 Additional information about the problem: BCCode:a BCP1:00000008000000DD BCP2:0000000000000002
I've been getting the "Windows not genuine" message popping up for several months on a 2 -year old home built system (I bought & activated a genuine copy of Windows 7). I've included the MGADiag report below. I've recently reactivated Windows using the Microsoft phone number but that didn't help. The lack of windows updates is now becoming a major problem!.I see in the report below there are several "tampered files".A Kaspersky virus/malware scan reports no problems. [code]
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system. Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 3 RAM: 8191 Mb Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb Hard Drives: C: Total - 476837 MB, Free - 246483 MB; Motherboard: BIOSTAR Group, N68S3B Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
In my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
anyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
