I currently have an ATI RADEON HD 4850 in my computer, but i have an old Nvidia 6600.. something laying around. I was wondering if it would be possible to drop that in my system and use it purely for additional monitors. I dont mean to link it with my ati card cause i know that that wont work, but basically keep it separate to run a few more moniters.
Edit: not only for windows 7 but if its possible on vista too.
anyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
View 9 Replies View RelatedI have a ATI Radeon HD 4800 that I use with DVI for my main display. I recently installed a Radeon 7500 PCI with the sole purpose of using the S-Video output to stream video to my TV. Under the device Manager I get the following error with the new card
PCI bus 7, device 1, function 0
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
What can be going on?
i have got a new PC and was wondering if i could use my Nvidia Geforce GT 440 with my Nvidia Geforce gt 220 at the same time? I want this setup so i can get more fps on my games. I have a custom built gaming PC and i really want good gaming proformance.
View 6 Replies View RelatedI run a Nvidia GTX 275 Works flawlessly even if i use both ports on the back to use dual monitors.
If however i plug my Nvidia 8800GT in the second PCI-E x16 Slot the computer only recognizes the 8800GT which is in the second port and there is no GTX 275 showing in the Device Manager or Boot Menu.
So basically i plug in my second video card and my primary card just vanishes from the computer like its not even there.
Has anyone got an idea what could be the cause of this?
I have checked the drivers and its the same drivers at the moment for the 8800GT and the GTX 275.
I want to be able to run my 19" Widescreen Monitor on my GTX 275 and use my 8800GT Card for my tiny 15" Screen so i can play Games on my Primary card and be able to have Website open and viewable all the same.
(I'm not trying to run SLi as i know you need 2 of the same GPU and your motherboard needs to be able to support it, I don't like SLi so its all good so far.)
I am currently running 2 monitors on my PC, but I would like to add a third that I had on hand. My computer has an AOD 790 GX/128M Motherboard, with quad-core AMD Phenom II CPU. I currently have a Nvidia NX8800GTX GPU installed, which has my 2 monitors connected to it. I have a graphics card that I could install, however it is an ATI X1300. I would be willing to connect my third monitor either through the motherboards embedded graphics, or through my ATI card. Is it possible to do either of these? I am worried about a driver issue since the 2 GPU's are different brands, and I am not sure it is possible to use embedded graphics at the same time as a card. If this is not possible, what would be the cheapest way to add a third monitor?
View 1 Replies View Related3 Viewsonic 22" monitors and one Dell 24 inch monitor all running DVI cables.
I have three of the video cards in the computer to run multiple monitors. Windows 7 has a feature where when you plug in a monitor, it auto detects it and then enables it and sets its proper screen resolution. The problem is that when I plug in more than one monitor, I get inconsistent results.
Here are some examples:
Example 1 that happens: I have two monitors plugged in and I plug in a third monitor. It enables it within Windows 7, but the monitor does not actually turn on. If I restart the computer, somtimes it will stay enabled and boot up with all three monitors on.
sometimes when I reboot it, it again shows all three enabled but only two are actually on. This happens also when I plug a fourth or fifth monitor on. Sometimes two or three monitors will be on whereas one or two others will not be on but will show enabled in display properties.
Example 2 that happens: Sometimes when I plug in a second, third, or fouth monitor, it will actually show an additional monitor as disabled. For example, if I have three monitors plugged in and it shows three monitors enabled (regardless if all three are on and working), and I plug a fourth monitor in, then it enables the fourth monitor, sometimes it turns on, sometimes it doesnt, and it also shows a "generic non-pnp monitor" as number FIVE.
Even though only four displays are plugged in. I've seen this happen even if I plug in a third monitor (shows four, with 3 or number 4 disabled). If I try to enable that FIFTH "ghost" monitor, and click apply, it says "cannot save settings." You can see an example of this as an attachment.
When I plugged in another monitor, it shrunk 2 and there is also a 5 the same size but disabled. Strangely enough, the 2 says the pnp monitor and 5 says the model number of the monitor. However, enabling 5 does not actually enable it and says that it cannot save settings.
I have tried downloading the latest drivers from ATI 9-10 as well as Catalyst Control Center as well as Hydravision from ATI and also Ultramon multiple monitor software. I have tried deleting the ATI 3600 drivers WDDM 1.0 (maybe 1.1) from device manager, only to reboot and then it installed the drivers, reboot again and it brings back all of the whacky settings.
I have a couple of times got all four monitors enabled and all four monitors on where the cursor moves across them properly. EXACTLY what I want to have happen. If I restart it almost always comes back on as EXAMPLE 1 where only two of the four monitors will turn on, but it shows them enabled in display properties, or if all four monitors do come back on, they are not in the same order that I had them in and it actually shows FIVE in display properties.
To make this all even stranger, believe it or not, i've even had it boot and one of the monitors is BLACK & WHITE. What is so strange about this is that the Windows 7 logo when booting, the color Windows 7 logo, is indeed COLOR on that screen, but once it is actually in Windows 7, it is BLACK & WHITE.
If I do a restart, it sometimes comes back in full color. What this means is that there is color while Windows is loading, and then once in Windows one of the monitors is BLACK & WHITE throwing out the possibility of a bad video card.
Has anyone else experienced anything like this? Is there KNOWN issues with Windows 7 and ATI video cards or drivers? How about Windows 7 and Viewsonic or Dell monitors? This is extremely frustrating and looking for some guidance on the subject matter. I believe that the drivers, whether Windows WDDM default or ATI's are simply not correct with Windows 7. I never had this problem with Windows XP.
PLEASE See "win7_monitors.jpg" file to see what I am talking about concerning EXAMPLE 2.
Edit: I need to add that on example 1, where it shows enabled but the monitor does not come on, I have noticed that about 50% of the time when I put the Windows 7 into SLEEP mode, and take it out, the monitor(s) that were off are now on.
I have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
View 2 Replies View RelatedI have a Dell Optiplex 740 that I'm using to test Windows 7 on. I have 3 video cards total. 2 are PCI cards and 1 is integrated. Windows sees the Integrated in the device manager but when I go in to the display control to change resolution I cant choose it to extended my screen to. It doesnt even show up in the selection. Only the 2 other cards. I went into the bios and made sure it wasnt disabled, I made sure the right drivers are installed, the cable is plugged in, and the monitor is on and has power. What else could be wrong?
View 3 Replies View RelatedAccording to Device Manager I have 3 graphics cards and 1 of them doesn't look good. It damn surely is not an official thing, so what to do?
View 4 Replies View RelatedOk so when I had xp installing drivers was pretty simple.
*uninstall then reboot
*driver cleaner reboot
*install new driver reboot and your all good
Now with windows 7 (64bit) i am having some problems. I am trying to update my driver for my 1900xt (ancient I know) because I seem to have below normal FPS in most games. I downloaded the ati driver package for win 7 64bit and installed. During installation I never actually see the driver or CCC being installed. I only see...
*Hydravision
*Microsoft visual c++
*Cat installation Manager
*Ati problem report wizard
Now after installing Windows Defender pops up with the C:amd/cat... path, notsure what that is all about.
What is the correct way of installing and uninstalling drivers in win 7? Becuase I cant seem to get this to install properly. Do i need to disable something in windows?
As time goes on and a product catalog grows, it's not unusual for a company to reduce and eventually eliminate support for older products. In the case of ATI, AMD's graphics division, a new decision to reduce support for older graphics chips is about to take effect. To date, ATI has provided a new WHQL certified driver every month to nearly every graphics card capable of DirectX 9 acceleration. That includes cards all the way back to 2002's Radeon 9700 Pro. After this month's Catalyst 9.3 release, that will not be the case.
After Catalyst 9.3, products prior to the R6xx generation of graphics cards (that go by the Radeon HD 2000 series brand names) will be changed to "legacy support status." This means that these products will get quarterly WHQL driver updates, instead of monthly updates. AMD assures us that these products will still receive critical "hotfix" drivers if high-priority fixes are needed.
whether it would be ok to run a Nvidia 7800GT and Nvidia 9500GT graphics cards side by side, safely on this mobo. Obviously i do not intend to run in SLI mode, i just want to run 4 monitors from all four outputs.
View 2 Replies View RelatedI recently played NFS Hot Pursuit 2 (released 2002), and the next day my Graphics card busted. The strange part is that I have been playing Robin Hood Legend of Sherwood AND Harry Potter 4 (both released after 2004 and with higher graphics) for over two months now and no problem arose. Could it be that NFS, and car games in general, exert greater pressure on the VGA Cards than normal strategy games? I am wondering whether to discard NFS or to play it
View 7 Replies View Relatedi want to download graphics card drivers for dell vostro 1510 .. i m using win7, 32bit..
View 5 Replies View Relatedi need driver geforce mx4000agp for windowes 7 32bit
View 1 Replies View Relatedwondering whether or not I can hook up two Galaxy Gtx560 1gb Cards to my Asrock h61M/u3s3 ?
View 7 Replies View RelatedWin 7 Live Mail: Sending HTML text works okay but when I try to send a new mail or forward mail with graphics the recipient gets multiple copies of the e-mail. One is usually okay but the rest are gibberish. To work around this glitch I have registered with Gmail to use when I want to e-mail with graphics. All Windows Updates have been entered. I changed mail options to plain text with similar results. My winter snowbird ISP is Bright House Tampa Bay Road Runner, and the computer is Dell Inspiron 15 laptop.
View 1 Replies View RelatedI am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
View 9 Replies View RelatedI have a desktop with an ATI Radeon 3200 HD integrated graphics,can that be changed or would i have to change the whole box?
View 9 Replies View RelatedI use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies View Relatedi bought a new hp g62 laptop with i5 and ati . i dont know what is the problem with the resolution and the size of the screen..
View 6 Replies View RelatedIn my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
View 3 Replies View RelatedHow to switch from onboard graphics to a graphics card
View 2 Replies View RelatedI have two 9500GT video cards one id Evga and one is BFG they are both 1GB DDR2. I have looked into it but you experts will know. I think it's possible to set up a crossfire configuration. It might not be worth doing but i would mostly do it for fun and to see if I can get it working. My current mobo supports it and would like to play with it.
Is it possible with the same GPU but different companies and possibly slightly different specs on the rest of the card? I thought if it the same GPU you could do it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814143150
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130395
Also you might know if I can make a USB install flash drive with professional and use it to install home premium or ultimate as long as I have the licence keys?
Just a thought. I'm currently running an XFX 260 Black Edition on my Asus P5Q Pro MB.
I still have my old card- A BFG 8800GTS OC 512MB.
I kept meaning to ebay it but never got round to it.
Is there any way I could usefuly use it in my present set up?