I have an Asus Rampage IV Extreme Motherboard and have Windows 7 Installed on a 96gb kingston ssd.
I now bought 2x 256gb Samsung 830s and want to run them in raid. If I set my RAID in bios, I cannot boot into my kingston ssd, it blue screens. If I set it to AHCI I cannot run my ssds in Raid.
I can do a fresh install on the ssds but how do I move my programs and data over? BTW.. I have Norton Ghost 15 which was provided with the Sammy 830s...
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
Im using one ssd as my boot drive for windows 7 but i dont know which way i should install it. i can either use AHCI or RAID and if i choose RAID i can specify either RST or RSTe. if i install AHCI, should i install intel's rst by loading the driver before installing windows 7 or install the rst driver after? same with RAID, should i install before or after?
View 27 Replies View RelatedI recently installed Windows 7 Home Premium on a new blank SATA hard drive which I had formatted using the default settings under Windows XP Disk Management.Prior to installing Windows 7 on this PC, I disconnected my other SATA hard drives to preclude any issues during formatting/installation.What I would like to know is whether changing the BIOS disk access mode from IDE to AHCI will impact my ability to access my old hard drives (once I reconnect them)?
View 6 Replies View RelatedI just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
I'm trying to install the Windows 7 32-Bit upgrade on my Dell Inspiron 1721 laptop and I get an error that says that I need to update my ATI AHCI Compatible RAID Driver. I went into the Update Device Drivers as suggested in the instructions and tried to upgrade that driver, but it says I have the latest driver for it. So I tried restarting my laptop and ran the upgrade setup again, and got the same error message.
Any ideas on what I need to do to get it to upgrade? I tried searching all over and can not find a newer version than what I have (2.5.1540.48).
I am trying to upgrade from Windows Vista 32 bit to Windows 7 32 bit but when booting from the upgrade disk it has problems finding my HDD's and says that windows cannot be installed on them once found.
When choosing a clean install from loading the disk from within Vista it starts to install and then when it restarts it brings up a blue screen saying that windows cannot be installed and is I have installed any new HDD's or controllers then on uninstall them.
When trying to upgrade at first it was complaining about the ATI ACHI Compatable RAID controller not being compatable but now it starts to do the install and then on restart it does the same as the clean install.
I have a W7 64 bit machine and I am trying to update the RAID controller driver without success.I am blocked by W7 from updating the driver and get the "Windows has determined that the best driver is already installed" message.I have tried to work around that and have been unsuccessful.Ultimately I am trying to enable a program "Hard Disk Sentinel" to view and display hard disk SMART info. Unfortunately the RAID driver controlling the HDD's on my PC have a date signature of 2009 and need to be updated to take advantage of SMART information technology
View 3 Replies View RelatedI recently upgraded to an SSD. I moved windows 7 over to the new SSD and re-aligned the partition properly The drive setup is as follows:
2x 500GB WD Black drives in RAID 0
1x 120GB ADATA S510 SSD
In BIOS, RAID mode is enabled. You cannot enable RAID for one pair of drives and AHCI separately. I was assuming disks that are not part of the logical RAID volumes would be set to AHCI automatically. I have enabled NCQ in AMD RaidExpert for the SSD.WEI is 5.9 for the primary disk. The primary disk is the SSD.Other strange behanivour is that the RAID array and the SSD both appear as SCSI devices in device manager, and Windows won't accept the ahci drivers from ECS.
I have the following MOBO:
ASUS P7P55D-E EVO
2X80gb Western Digital SATA Drives
2x2TB Samsung Spintpoint SATA Drives
I have already been using the machine with another 80Gb Western Digital SATA Drive with Windows 7 Pro 64Bit installed and now want to convert to RAID 5 for redunancy in case of Drive failure (We all say we will back up but we are all lazy when it comes to it LOL).I have taken out the original OS drive and plugged it into the E-SATA connector on the MOBO, gone into the BIOS, turned on RAID for the SATA Ports on the MOBO, and connected the 2 X 80Gb Boot drives. Entered the Hardware RAID Controller POST, and created the RAID 5 Volume from the 2 X 80Gb Discs.Now boot with Acronis Wester Digital edition.Clone the Original 80Gb Disc to the new Raid Array.Shut machine off, remove original OS 80gb Disc from E-SATA port.Boot machine.It starts to boot, and gets as far as the Windwos 7 Microsoft 4 Colour logo and then I get an error and then have to boot into Windows 7 from DVD and go through the repair process.When the Repair has run it reports the following:
The following startup option will be repaired:
Name: Windows Boot Manager
Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows Recovery Environment (recovered)
Path: Recoverye52d0bc2-1f15-11df-af10-d764fe3715b8Winre.wim
Windows Device: Partition=D76190 MB)
A copy of the current boot configuration data will be saved as:C:BootBCD.Backup.0001 However it fails to do the update How do I get this RAID to boot successfully? I *don't* want to have to re-install the Operating System as that is just too painful a thought?
So i would like to buy a whole new computer. but i want to keep the operating system which is windows 7 professional. It's installed on the hard drives as raid 5. now i know that the raid key or whatever it's called is stored int he bios so just plugging the hard drives into a motherboard that supports raid 5 won't work. So what can i do to install everything that i have on these hard drives into a new system? Also the operating system is registered online would i be able to re register it or something? i don't have the new computer yet i'm just looking around for something good and for a good deal.
View 12 Replies View RelatedVery little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
I have the GA-EX58-Extreme Board and have just installed the pre release of Windows 7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler went normal.
As always i got problem to change the J micron controller to AHCI and of cause i got the BSOD again. I installed the latest R1.17.48.16 driver and tryed again but no luck. Can some tell me what i am doing wrong. ? I have a hardisk and a dvd drive attached to the J micron Sata connection.
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies View RelatedI have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
View 1 Replies View RelatedI need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies View RelatedI had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies View RelatedWhich configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies View RelatedEverytime i want to swap hard disk with different OS, WinXp(IDE) to Windows 7(AHCI), i need to do change some hard disk setting on BIOS. Is there any way that i can do to make both hard disk with different OS compatible on the desktop PC without change any setting on BIOS everytime i change hdd? Is there a way to make WinXP IDE mode to run under AHCI mode?
View 1 Replies View RelatedIm tryin to get my 64GB Mtron SSD runnin with Windows 7 but I can't get it to show up in the installation process. It shows just fine in the BIOS, in device manager, in My Computer and in Windows Disk Management, in fact I can even use it as storage but for some reason It will not show up as a disk to install Windows. I have tried as IDE in BIOS and AHCI and in AHCI mode it will not show up in the BIOS at all or anywhere, I can only get it to show in IDE mode. It has been fully formatted and has had Windows 7 on it here recently (had to reformat due to some speed issues). Does anyone know a way I can get Windows put back on, preferably in AHCI mode cause Im stuck with a Thousand dollar drive thats good for storage only
My board is the Gigabyte GA-EP43-UD3L with BIOS F8 which according to their site is the latest one. Processor Q8600 and 4GB of OCZ Flex RAM...
This happened when I was booting today after turning it of last night after using it successfully since I bought it.The AHCI Drivers are corrupt.Windows won't load, it is stuck on the load screen.Trying to repair windows using the various F8 options doesn't work because they won't load either.Even the recovery partion won't load, it's stuck on the Acer E Recovery screen "please wait" and it is stuck for several hours on this.Now, in BIOS, when I change to IDE mode, it will load the various F8 options like trying to fix windows, but the problem doesn't solve itself. Also, the recovery partion does load, but it only gives me an option to install everything to factory settings, not just reinstall windows. However, Windows 7 won't actually boot on IDE mode, so I can't actually get into Windows 7.Therefore, my AHCI drivers are corrupt while the IDE ones are fine. How do I install fresh AHCI drivers to fix my corrupt ones from a USB stick? I do not have a windows install disk, it is all on the recovery partion/recovery disks
View 9 Replies View RelatedI need to reinstall my Windows 7 Ultimate 32 bit O/S if I wish to use the AHCI setting for SATA disks?I installed the O/S with the BIOS setting for SATA at ATA then changed it in the BIOS after install. Unfortunately, the PC will not boot with it set to AHCI for SATA but changing it back to ATA gets it to boot.I thought that from Vista onwards the SATA setting in the BIOS could be changed after the O/S had been installed, perhaps not ?
View 1 Replies View RelatedHow to Enable AHCI in Windows after Installation ?
View 0 Replies View RelatedWent into the registry, and changed the Start Value of msahci to 0. However, when I enable AHCI in my bios, Windows 7 won't boot. It freezes and then my system restarts.
View 5 Replies View RelatedSo I just bought myself a Crucial M4 SSD. And the guy at the store told me to make it run even faster to go into the BIOS and turn the HDDs to AHCI. So after installing Windows and playing around a bit I decided to go to the BIOS and do it. But then when the Windows sunburst comes up it crashes. What gives? I was reading somewhere else that there needs to be a registry change somewhere too?
View 7 Replies View Relatedi secure erased my SSD which was set to IDE, and re-installed windows 7 on the new AHCI setting instead.Now windows takes x2 (twice) as long to BOOT up, with the circle going round and round and round for about 30 seconds (instead of the previous 8-10 seconds in IDE.
View 1 Replies View RelatedFirst thing, my build:
Board: Gigabyte GA-P55A-UD4
CPU: Core i7 870 @ 2,93 Ghz
Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18
Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD
Running: Windows 7 Ultimate
Trying to install: Windows 7 Ultimate
PSU: LC Power Arkangel 850W
I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally.
I didn't know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the HDD? Anyway, I really want to start using the disk. I have tried installing Windows 7 from a dvd as well as from a USB key.
I changed the appropriate setting in the registry. (msachi > start: 0) Then I changed the setting in my motherboard and Windows froze upon starting up, and my system rebooted.
The thing is, I changed it to AHCI before. It worked fine! I then switched back to IDE while trying to fix a problem with eSATA detection (turned out to be a faulty cord), Now I can't switch back! Sigh. I really would like my eSATA to be plug and play.
First thing, my build: Board: Gigabyte GA-P55A-UD4 CPU: Core i7 870 @ 2,93 Ghz Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18 Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD Running: Windows 7 Ultimate Trying to install: Windows 7 Ultimat PSU: LC Power Arkangel 850W
Ok so here's the deal. I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally. I didnt know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the disk? Note: I have tried installing Windows 7 from a dvd as well as from a USB key.
Okay I plan on doing a clean install of Windows 7 on my laptop. I have an SSD from crucial.I know that I need to enable AHCI BEFORE I start the installation of Windows 7...correct? I saw this Intel website in regards to AHCI.Intel Rapid Storage Technology” Configure the BIOS for RAID or AHCI on an Intel Desktop Board.I know that my laptop has a chipset that supports AHCI."Enabling AHCI or RAID after installing the operating system is not recommended or supported when a SATA hard drive is the boot drive. Enabling AHCI or RAID after installing the operating system might cause an immediate blue screen with an 0x0000007b error code, followed by a reboot. If you use AHCI or RAID, enable them before installing the operating system.".it looks like enabling AHCI is the absolute last thing I should do before installing Windows 7. As in this is the routine I should follow.
1) Back up any drivers/files/etc that I need
2) Insert Windows 7 Installation Disc
3) Close out of pop up install window.
4) Restart Laptop
5) As laptop is restarting enter BIOS
6) Follow Intel's step by step guide for enabling AHCI
7) Change system to "Boot from DVD Drive"
8) SAVE new BIOS Settings....EXIT
At that point my computer should REBOOT and this time it will do so from the DVD drive and Windows 7 installation screen will appear correct? OR am I missing something? Do I need to do anything in Windows 7 itself before I do anything with the BIOS?