BSOD When Installing Windows 7 In AHCI Mode
Jan 24, 2011
First thing, my build:
Board: Gigabyte GA-P55A-UD4
CPU: Core i7 870 @ 2,93 Ghz
Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18
Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD
Running: Windows 7 Ultimate
Trying to install: Windows 7 Ultimate
PSU: LC Power Arkangel 850W
I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally.
I didn't know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the HDD? Anyway, I really want to start using the disk. I have tried installing Windows 7 from a dvd as well as from a USB key.
View 5 Replies
ADVERTISEMENT
Jan 24, 2011
First thing, my build: Board: Gigabyte GA-P55A-UD4 CPU: Core i7 870 @ 2,93 Ghz Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18 Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD Running: Windows 7 Ultimate Trying to install: Windows 7 Ultimat PSU: LC Power Arkangel 850W
Ok so here's the deal. I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally. I didnt know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the disk? Note: I have tried installing Windows 7 from a dvd as well as from a USB key.
View 7 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Mar 31, 2012
My motherboard is a Gigabyte Z68XP-UD3 Revision 1.3, my OS is Windows 7 Professional 64 bit, my HDD is a Seagate 1.5tb, and my SSD is an OCZ Agility 3 60gb.
So i was using Intel Smart Response technology with my SSD for SSD caching, everything was pretty much working fine. The other day i flashed my bios using @BIOS without properly disabling my smart response configuration, which i probably shouldn't have done and i won't do again. When i rebooted, Intel Rapid Storage technology was acting up and when i tried to open it, it said "IAStorUI.exe has stopped working". After that, i uninstalled the program and tried to re-install it, but during the install it said "This computer does not meet the minimum requirements for installing the software." After a little research, i found out that it meant that my bios was set in IDE mode instead of ACHI mode. I am not sure what the mode was before i flashed my bios, but it was probably some sort of raid that it used for SSD caching. When i went into the bios and switched from IDE to AHCI, windows would blue screen after performing a few seconds of the boot logo. I switched back to IDE, and did some research to find out about the "Start" registry in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci. I switched that from 3 to 0, and windows was able to boot into AHCI mode and automatically got drivers. Then, i tried re-installing Intel Rapid Storage technology. It was able to install, and i rebooted my computer. It blue screened again on the same part of the boot logo as before. I had to switch back to IDE mode to get it working again. Then, i got new chipset drivers from Intel's website, which didn't help. The registry that i changed is still set to zero, but it just won't successfully boot with AHCI like it did the first time i changed the registry. I am very stumped and i dont know what i could do to make it work like it did before i flashed my bios. My friend recommended that i should reinstall windows, but then i would have to go through the trouble of getting everything back and i think there should be some way of doing this without reinstalling the os.
The bottom line is that windows blue screens when the bios is in AHCI mode, even though i have the registry that should fix that and that did fix it on one boot set to zero.
View 1 Replies
View Related
Aug 7, 2012
Everytime i want to swap hard disk with different OS, WinXp(IDE) to Windows 7(AHCI), i need to do change some hard disk setting on BIOS. Is there any way that i can do to make both hard disk with different OS compatible on the desktop PC without change any setting on BIOS everytime i change hdd? Is there a way to make WinXP IDE mode to run under AHCI mode?
View 1 Replies
View Related
Jan 1, 2012
I changed the appropriate setting in the registry. (msachi > start: 0) Then I changed the setting in my motherboard and Windows froze upon starting up, and my system rebooted.
The thing is, I changed it to AHCI before. It worked fine! I then switched back to IDE while trying to fix a problem with eSATA detection (turned out to be a faulty cord), Now I can't switch back! Sigh. I really would like my eSATA to be plug and play.
View 4 Replies
View Related
May 28, 2010
I need to reinstall my Windows 7 Ultimate 32 bit O/S if I wish to use the AHCI setting for SATA disks?I installed the O/S with the BIOS setting for SATA at ATA then changed it in the BIOS after install. Unfortunately, the PC will not boot with it set to AHCI for SATA but changing it back to ATA gets it to boot.I thought that from Vista onwards the SATA setting in the BIOS could be changed after the O/S had been installed, perhaps not ?
View 1 Replies
View Related
Nov 11, 2011
i'm working with a new pc build that uses a 60 gb ssd for its boot drive, and which is also reusing some "old" sata hdds for storage.
at the time i installed windows 7 ult 64, i had only a new ssd plugged in, and the bios was set to ahci mode. the installation went fine and i was able to boot into windows afterwards without issue.
then, i connected a wd caviar black sata hdd to use as storage, with the ssd being the boot drive. with both of them connected, windows will not get past the starting windows screen.
i made this video of the program before i understood that it was a drive controller issue: startup problem - Internet in it, you can see that windows boots fine in ahci mode with just the ssd plugged in, but that when the backup sata drive is also connected it doesn't get past the starting windows screen.
for the record, this caviar black hdd was my previous boot os, and it also has a windows 7 install on it (which i've renamed the base folder of), but it is not booting from that hdd. also, i have tried the same thing with other "old" sata hdds that do not have any previous windows install on them, and the result is the same thing which is shown in the video.
View 9 Replies
View Related
Apr 8, 2012
i have an ASUS M5A88-M motherboard, and a Western Digital WD2503ABYX HDD. i am trying to make that drive work in AHCI mode, but when I try, the disk won't boot. i think the HDD is AHCI compatble, tho not certain. i went into the registry to set a value=o for the relevant AHCI parameter, but no luck. if i need a full re-installation of Windows 7 64-bit, does it prompt me along the way to set the mode to IDE or AHCI?.
View 2 Replies
View Related
Jun 29, 2011
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
View 5 Replies
View Related
Jul 5, 2011
I successfully installed Windows 7 64bit in AHCI mode on a PC with 3 new 3TB Western Digital WD30EZRX Caviar Green hard drives.Then I installed "Intel Matrix Storage Manager Driver [v8.9.0.1023]" & as soon as Windows restarted after installing it, Windows would not boot, & will now only boot in IDE mode.In IDE mode I have to do a system restore to the point before installation of "Intel Matrix Storage Manager Driver" to be able to boot again in AHCI mode.
View 1 Replies
View Related
Sep 19, 2011
Can someone hit me with a link for manually installing the AHCI driver and switching the OS mode for the storage controller.
If I remember right, this is just putting the driver in /sys/drivers, running a script, and making a registry change. Then you reboot, change the motherboard setting, and then install IMSM after the OS comes back up. I don't remember the script, or if it was just a reg edit, etc.
View 5 Replies
View Related
Feb 9, 2011
I'm trying to do a startup repair of Windows 7 x64 on an SSD but can't boot from the CD-ROM while in AHCI mode. I have set CD-ROM at the top of the boot order in BIOS but this is just ignored and the computer boots from the SSD with the knackered version of W7x64. I read somewhere that when in AHCI mode, the BIOS boot order may include "CD-ROM" but it's not the real device anymore. I tried looking for the CD-ROM by its manufacturer name in the list under Hard Drives but it's not there either.So just how do I go about booting from the CD-ROM in AHCI mode? No problems booting if I set the BIOS back to IDE mode, install Windows 7 and then do the registry hack to install the AHCI drivers, but I'd like to be able to boot from the CD-ROM in AHCI mode.
P.S. I have a Gigabyte GA-MA78GM-US2H motherboard and am using the latest BIOS version (F9D)
View 2 Replies
View Related
Oct 18, 2011
I'm installing Seven on a WinXP machine and completed the install, but forgot to change the SATA setting in the bios from "compatibility mode" to AHCI. Now when I change it, windows gives me bluescreen on boot.I'm dumbfounded that Windows Seven startup repair can't fix a problem this simple, but it completely failed, wasn't even able to find a problem.I was thinking it might be easier to just reformat and begin the install over again, or startup in safemode and install the intel SATA drivers... assuming it will let me boot into safemode with AHCI enabled.ps. On the other computer (different thread), I'm going to wait till I have several hours of uninterrupted time, in case I need to begin over installing all the windows versions one at a time. I'll reply with any success/failure on that thread later in the week.
View 4 Replies
View Related
Jul 13, 2012
I own a lenovo thinkpad and recently all of a sudden i recieved this messg where it says mediatest failed, check cable, the solutions stated i change my SATA controller to compatible mode from AHCI to IDE most perferably. Id like to know step by step how i can do it myself.
View 1 Replies
View Related
Apr 30, 2011
A strange problem, nothing critical, but I found it annoying that my optical sata drives will not boot from a bootable disk when in AHCI mode in Bios. If I switch the drive mode to native IDE then I can boot just fine from either of the Opitcal Sata drives.I have done some searching and found this has been a problem out for some builds/MB in the past but you would think with a new MB and Sata controller and such this would no longer be a problem.If you look at my specs you will see the Gigabyte MB. The documentation is fuzzy on the sata ports. There is a setting to put SATA port 4/5 into some kind of IDE support mode. I currently have the slots 0 - 3, used for all the drives. 0 & 1 for HDD, and 2 & 3 for the optical drives,wondering if I use the 4/5 slots for the SATA and set the bios to the 4/5 ide support if this might solve my little problem.
View 9 Replies
View Related
Oct 3, 2012
If the BIOS setting for the hard drive controller is AHCI it will not recognize the drive. (This was the default setting in the BIOS), If changed to IDE mode it recognizes the drive but come up with an "No operating system detected" message. If the hard drive is installed in a second lap top it works fine. If another hard drive is installed it works fine in AHCI mode. Only the combination of the original hard drive and the original lap top wont work.
View 9 Replies
View Related
Mar 30, 2012
I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
View 8 Replies
View Related
Feb 22, 2011
I found the my AHCI version driver is 6.x where as the latest version is 9.x. This is concering with BSOD's.A few errors I can remember are BSOD stop errors:
-0x000000a
-0x00000019
-0x000000D1
-0x000000D7
View 9 Replies
View Related
Jul 16, 2009
I have the GA-EX58-Extreme Board and have just installed the pre release of Windows 7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler went normal.
As always i got problem to change the J micron controller to AHCI and of cause i got the BSOD again. I installed the latest R1.17.48.16 driver and tryed again but no luck. Can some tell me what i am doing wrong. ? I have a hardisk and a dvd drive attached to the J micron Sata connection.
View 3 Replies
View Related
Jun 18, 2012
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies
View Related
Feb 8, 2012
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
View 6 Replies
View Related
Sep 17, 2012
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
View 2 Replies
View Related
Jun 15, 2011
I have a new Tosh laptop with Windows 7 Professional and want to get XP Mode installed and running. I have checked that the processor etc is OK with XP Mode so everything should be fine. However after I have downloaded the upgrade file from the Microsoft web site and run it there is no sign of XP MOde other than in Control Panel it is listed as a program and there is also a folder in program files called Windows XP Mode.
What do I need to do to get the XP Mode up and running?
View 5 Replies
View Related
Jan 19, 2013
It seems after hours of searching, I've learned that there's a problem with using XP Mode with AMD Bulldozer-based CPUs, like my FX-4170 (lucky me.) Microsoft has a hotfix, url...but after running it "successfully," XP Mode still will not install properly--I get an error message right at the end of the install process. I also ran Microsoft's virtualization checker, and my machine checks out as compatible.
View 1 Replies
View Related
Aug 20, 2011
I'm running Windows 7 Professional 64 bit in bootcamp on a MacBook Pro 13". I installed XP mode but the version that installed was XP 64 bit. I would like to install XP mode 32 bit so I can run Splinter Cell and a few other older games. Is there a way to load XP mode 32 bit under Windows 7 64 bit Pro?
View 1 Replies
View Related
Jun 3, 2010
Ok so I think one of my buddies messed up my windows vista cuz it will not boot windows anymore it goes to launch repair windows or launch windows normally. I tried launching repair but nothing happens same with launch windows normally. So I got a windows 7 install cd and I pressed f8 and windows loads files then I see the windows 7 logo saying starting windows but after that it goes to a black screen with the mouse on the screen. And it stays on that screen. I don't have the cd that came with my laptop, is there anything I can do to get windows running again?
View 9 Replies
View Related
Sep 8, 2011
I have completed the installation of xp mode on my windows 7 64-bit professional computer with the exception of the antivirus. I'm using a multi-user Trend Titanium Maximum Security 64-bit version on windows 7 and have tried to install the second copy from the xp mode as per the instructions that I am following. Due to the xp mode being a 32-bit system I tried loading the 32-bit Trend version but the install failed with a "incompatiable version of internet explorer" error message. Therefore due I load from the xp mode or thru the virual machine and/or install the 64-bit version for xp mode. I do have Internet Explorer access when in the xp mode.
View 9 Replies
View Related
Jun 12, 2010
I tried to install with my graphics card ATI ASUS EAH4350, but I couldn't install win 7. It stopped when "starting for first use" message. But I found solution to install Windows 7 in vga mode and it worked. Then again I put my graphics card and started win 7. It automatically installed vga driver and asked me to restart before I install ati catalyst driver from cd. After restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer. It only starts in vga mode or safe mode. By the way I have win xp as well in c drive nad installed win 7 in h drive.
View 3 Replies
View Related
Dec 2, 2009
I cannot find out why my Windows 7 install only has two options: "Start Recovery Console/Mode?" and "Start Windows Normally"... Where is safe mode.
View 9 Replies
View Related
Jun 12, 2010
first i tried to install with my graphics card ATI ASUS EAH4350,but i couldnt install win 7. it stopped when "starting for first use" message. but i found solution to install Windows 7 in vga mode and it worked.
then again i put my graphics card and started win 7. it automatically installed vga driver and asked me to restart before i install ati catalyst driver from cd.after restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer.
i have been searching many forums,but found no solution. it only starts in vga mode or safe mode. by the way i have win xp as well in c drive nad installed win 7 in h drive.
View 7 Replies
View Related
