I use the IE browser. Although I have it set on maxim window size, all my web sites initially come on reduced size and I have to click on the maximizing window. Anyone know how to have max window sizes all the time?
Don't know why, but when I try and drag a window to the top of my screen to 'maximize' it, Windows 7 will minimize it to the bottom of the screen instead - where just the title bar is showing.
Whenver I maximize a window it goes across all three screens, now that is okay for video games but not so much for the internet or other programs. Whenever I open a program it is opened very small and I have to manually adjust to windows to each screen, and it kind of gets annoying.So is there a way that I can change a setting or something that when I maximize my window it will only maximize on the screen that I have the window open on?I am running Windows 7 btw.
recently the problem started to occur. Basically, the windows maximize and minimize slowly sometimes. When i restart the laptop the problem usually gets fixed.
- I recently updated my graphics cars as well : ATI Mobile Radeon 5600..
- Windows updates are automatic as well
Laptop Specs:
Sony Vaio E series Operating: Win 7 Home Premium (64 Bit) , i3 RAM: 4 GB
I've had this problem for a while where occasionally when I boot up my laptop (Dell XPS), the windows would maximize and minimize in slow motion and all my games run in slow motion. A restart usually fixes the problem.I've looked for solutions in the past but the problem always comes back. I was wondering if anyone can tell me what the problem is or how to fix it.
On occasion, when FF7 has been maximize, the Windows 7 taskbar (locked and set to autohide) can not be brought up with a hovering cursor. To get it back while in max screen, I have to fiddle around with minimizing and maximizing while bringing up the taskbar when it is visible...a real PITA, eh? Although I have researched this problem and have found out it goes back at least 5 years, I have yet to see a solution?
So i got my laptop battery replaced since the last one died up on me and fortunately laptop was under warranty so DELL was kind enough to send me a free replacement battery.ow then maybe i was not following proper charging procedure/or overcharging my battery.o the question arises how to maximize the battery life and whats the proper procedure of battery charging??Yes i know there are tons of claims and counter claims regarding the "perfect" charging steps and guides.To all experts here,just wanted your comments on the same.
I've recently encountered a strange thing while playing ME3 on my Windows 7 laptop. I'm a big fan of the series and I've played 1 and 2 with no problems at all. However, there's an issue going with ALT+Tabbing. I know some games are not meant to work this way but that is a really strange case. I could minimize Mass Effect 1, the full window restoration would take some time though. I could also minimize ME2 and restore it in mere seconds. Mass Effect 3, I just can't restore it. It stays on the taskbar, I can click it endlessly but it won't come up. And right when I thought this is a one-game issue, I accidentally tried again and it worked. I could minimize/restore Mass Effect 3 in a couple seconds. But it only worked this one time.
Is there a way to prevent a reduced window from maximizing when it it dragged to the top of the screen? It seems I have run across how to do this somewhere but darned if I can find it again.
How do I get the picture to maximize automatically when I click on a desktop icon with Internet Express as the default browser. With Google Chrome as the default browser, it works fine.
With widescreen monitors, which are pretty much the standard these days, there is always plenty of horizontal space, it's the vertical space that is at more of a premium. To take advantage of this I've done 2 things - First, I moved my taskbar to the left side of the screen, this gives me that much more vertical space in all programs.
The second thing is program-specific. I use Firefox and I certainly spend more time in it than any other program. I've installed 2 two add-ons, Vertical Bookmarks Toolbar and Compact Menu. They do just what their names imply - the first places my bookmarks toolbar to the left (or right, if you prefer) of the screen, the second compacts my entire Menu toolbar to a small icon that sits in the upper-left corner of the address bar. Getting rid of these 2 horz menu bars gives one a nice little chunk of additional real estate. It takes a bit getting used to, but once you do, it's great.
Hi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
I installed Win 7 Ultimate onto my brothers Win 7 Home Edn laptop. I didn't realise at first and he has done quite a bit of work on it since the installation, on iTunes and the like. I only noticed the error when trying to activate windows and, of course, as the laptop is Home Edn, and I used an Ultimate disc it didn't take the key on the laptop. So I have now installed Home edition and have the Windows.old folder present. I basically need to put all the programs and file/folders etc into the new OS.
the XF's are lost after rebooting Windows and it does not happen every time, ie occur alternately eg after 2 and sometimes 10 days...then i go to device manager sound and i have sb x-fi but at sound i havnt sound icon so i click right at sb x-fi icon at dm and uninstall...reboot windows..after rebooting sond install by itself my sound card from motherboard is disabled at bios.
the stellar customer service at Dell I have had to recently reinstall windows 7. I was running windows 7 prior to this installation and therefore those files have been moved to windows old. How do I reinstall this file? I'm assuming the process is the same as for other versions but being as I'm not that technically savvy I don't know how to change the command scripts to suit my situation.
I have a PC running Windows 7. It is constantly being locked out, and windows XP and windows 2000 both allow you to use the windows tool ALockout.dll to discover which process is causing the lockouts. Does anyone know if there is a similar program for Windows 7?
MS and their mail systems are giving me grief. I have a Vista 32 PC using "Windows Mail" and want to transfer email folders (lots) and messages to Windows 7 using Windows Live Mail 2011.Windows Mail was a replacement for Outlook express on Vista.Windows Live Mail 2011 is a replacement for Windows Mail on Windows 7.I tried a couple of things.
1) Basic Export and ImportI exported relavent files: Account info, Contacts and all the messages to a folder (in Windows Mail format) on old computer and used the old "Addias" transfer - copied folder to stick and RAN it over to the new computer. - Imported (using the Windows Mail format) the Account info successfully, - imported the Contact info successfully. - Import Messages - appeared at first to be successful
Issue: Message folders appear to be renamed and some folder names have been truncated, not all folders appear to be there. (Looks like "long Name folders greater that 8 characters get truncated)
2) Tried the "Easy transfer mechanism (Vista and Win7 transfer utility) - but couldn't get the new computer to see the Vista even though I could see them on the network. I thought that this would transfer the folder names correctly.I'm about to try a time consuming effort of coping folder by folder (export/Import)What I am more concerned about is that the individaul messages may have the same issue Ie not all coming accross and subject names being lost. Looking for alternative or third party transfer solutions?
I just bought myself some new parts for a new computer I built. After buying the parts and assembling it I tried to install windows 7, keeping in mind that this computer has no previous os installed in it, completely blank. I somehow managed to get to safe mode and install till the part where it says expanding windows files completing that step fully and rebooting to continue the installation, I have no idea why but after when it restarts, it freezes at the "starting windows" screen with the four orb animation. It should just go to the next screen with the blue wallpaper asking me for the language I would like and what not. But it just gets stuck there and doesn't move on, I tried
rebooting removing as much devices I had plugged into the motherboard removing everything but the mouse and key board removing the graphics card removing one of the two sticks of ram
[code]...
I have tried everything I know of and I don't think I need to update my bios because no one else has encountered this problem. Swell I am not very good with computers I am very new to this so...I also heard about updating drivers , but don't u need to actually be able to login to your computer to download and install them? I can't even log in, I wait for the windows logo to pass but it never does please help Tom Hardware community.
I bought a new computer that came with a Win 7 HP license, however I already have a copy of Win 7 Ultimate on another smaller HDD that dual boots with XP.I have copied the Win 7 HP partition to the smaller HDD that has dual boot Win 7 Ultimate / XP using EASUS Partition Manager. Then I disk copied the smaller HDD to the new larger HDD thus wiping the original contents of the HDD.So far so good, the larger HDD now has C: Windows 7 Ultimate; D: XP Pro; E: Windows 7 HP. Of course the boot manager only has entries for the C: and D: partition.I think I can use bcdedit to add another entry but I am a little confused about how to do this, I've seen examples for Win 7 and XP or Vista but not for 2 copies of Win 7. Can anyone tell me what bcdedit commands I need to run? For instance I could run "bcdedit /create {} /d "Win 7 HP" but I don't know what to put inside of the {}, I think I need a new UUID but I don't know if I should be running "bcdedit /createstore" first or something else.
Yesterday i wanted to change my OS to windows 7 64bits (I had windows 7 32bits before and worked just fine). The installation goes well but when windows install tries to reboot to complete the installation it hangs on "windows start" and reboot again and again. I tried several solutions such as
- Install using a different cd (3 different cds and same problem) - Install from USB flash (not even working) - Fix boot system (from command prompt using windows repair cd) - Re-install windows 32 bits (same problem) - boot in Safe mode (same problem it reboots again and again) - Windows system repair (from cd)
PS:I have a Dell inspiron M 560 (Core 2 Quad, 4Go in RAM).
I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
I just installed Windows 7 Ultimate on my Dell Optiplex 755. It originally had Windows Vista Business. 64 bit OS. After Win 7 Ultimate installed I immediately want to access files or folders and I'm hit with a Explorer.EXE
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.So after doing some research I re-installed a second time this time formatting the drive first. Then installing Windows 7 Ultimate. As soon as I get to the desktop I received the same error as mentioned.
I am unable to download windows updates KB2524375 and KB9478321 for my windows 7 home premium. I have downloaded Hot Fix KB947821 but still get error. Log shows MUM 0X00F0900. Its seems that I have a registration problem but my windows was downloaded on my new acer computer. These are the only updates I have been unable to install.
Had a bad storm last night, so I shut down the comp. Restarted this a.m. tried to stream the Arsenal match and mozilla would crash every time I tried to leave the home page. Went to IE, watched the match, and then began to TS moz. After a bit I decided to unistall. Upon trying to reinstall i get a corrupt file error msg during extraction. I then tried to d.l. Chrome and had problems w. that too. Yet amazingly enough, IE works fine. Is this Microsoft just f'in w. me 'cause I'm not amused?I also notice that in my start menu I have no quick select icons for network connections, control panel, etc.
Mobo: Biostar A880GU3 CPU: AMD Phenom II 965 GPU: ATI HD 5770 PSU: Corsair 750w RAM: 4GB (2x2) DDR 3 HDD: WD 320gb OS: Win 7 Pro 64bit
I've just recently purchased a generic wireless mouse from eBay. more specifically, this one: 2.4GHz USB Receiver Wireless Optical Mouse F PC Laptop | eBay it doesn't work. I'm running Windows 7 64bit and it started installing the drivers, first it was installing "HID Wireless Mouse", then it switched to "USB Input Device" but failed after 3 seconds. now it's listed in Device Manager as "USB Input Device" with yellow sign that indicates it doesn't work. I tested it in 2 other Windows 7 32bit computers and it works just fine! installing drivers and everything. moreover - I testes my bro's logitech wireless mouse on my 64bit Windows 7 computer and it works fine. I think Windows fails on recognizing it. I mean the drivers are there.. the Logitech Mouse works but mine doesn't.. how do I make it work?
Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact. I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
I have a lenovo pc 9210 all diags pass all hardware is good. was running xp fine loaded vista ok loaded windows 7 32 bit runs ok, needs windows 7 64 bit...loaded windows 7 64, reboots after load begins first time setup then completes as normalreboots ....and hard drive light blinks .... then starts to start windows 7 but gets the four colored dots then just sits there no more hd lights no , no nothing.
I transferd all of my music files from my old laptop whih is a toshiba windows vista. Most of the files have the artist, album and genre. Howvere, when i view them on my new laptop a lenovo ideapad iwndows 7, it isn't showing the properties for most of them...some yes...but very few. i just dont get it. I tried t save to a hard drive and then save to the new comp and to save to a flash drive and upload...same result both ways. I dont want to have to go through all 2000+ musc files and reenter all the properties..