Is it feasible to use more than one cloud system? I was using Sugarsynch but I found it very slow but I used it as it gave me 5GB. I'm now using Dropbox, to backup my mail (eM Client) but I only get 2GB. At this stage I''m still evaluating which one to go for but the question is, will they clash if they are both trying to upload at the same time. or will one take precedence?
View 3 RepliesI am looking for a small cloud based system that would allow the following activities:Finances (Buy Price, Sell Price, Profit etc..) Notes Section for people to share their thoughts Plus and other features that may be possible.I don't mind if it is hosted on a secure site or hosted on a server at someones home and made available to others (Would need making secure somehow).
View 5 Replies View RelatedQuote: What happens to data when your cloud provider evaporates? There's no way to directly migrate data between service providers?
View 6 Replies View RelatedI'm looking for a cloud storage to use with a group of people.It should provide >5GB storage,be usable on Windows and Linux and free.
- I don't find "My Sky Drive" to mount it as locale drive.
- What is the difference between "Documents" and "My files".
- How does the "Sharing" feature works. What does happen with the mails I enter in the formula? who can they access the files? Especially if they don't have a live ID?
- What does "Syncron SkyDrive" is? Didn't understand how it works?
Drop box & Amazon's cloud service only allows for file backup - what about a folder?Any service that allows folder back up?
View 7 Replies View RelatedIs it possible to create a WevDAV server in my windows 7 Enterprise SP1, using IIS 7.5? I have several devices (including iPAd with iOS 5) which need a WebDAV to interchange or save files in a (home) "cloud disk".
View 1 Replies View RelatedI have a Compaq Presario C700 laptop running windows 7 and one day when turning on my pc I have encountered my wireless icon on my taskbar began showing grey with an orange looking cloud over it. I have dove into the system checking everything that I could think of to change it back to displaying properly. i am connected to the interent through a Netgear router and I can access the internet through either 2 ghz or 5ghz band but the icon will not display properly. No matter where I connect to the internet the icon still displays the same way. I thought it may have been my norton internet security that caused the issue I removed Norton and rebooted the icon remained the same I then Installed my Mcafee virus shield.When the problem began I had changed nothing nor had I installed anything to cause the issue. It just began one day.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3062 Mb
[code]....
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies View RelatedI have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedWould it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View Related"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 2 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I am looking to upgrade my desktop from an xp to 7. System builders are very cheap which concerns me. What is the difference from a system builder and the regular version.
View 4 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedDid a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies View RelatedHow to Automatically Create A System Restore Point at Startup ?
View 0 Replies View Relatedis it possible to copy a device driver from one system to another compatible system? I just installed windows 7 pro (64bit) on my Dell Optiplex 380, but no ethernet controller so i cant use it on a network.
View 3 Replies View Relatedwhenever i boot my pc i starts making sounds for like 15 secs and later asks me t choose my operating. this started wheni removed my battery for like 3 weeks and then inserted it back. am using acer mini.
View 5 Replies View RelatedThe other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies View RelatedMy C: dreive is a 128GB SSD which devided into 70 and 50 GB.Windows and all programs are installed on 70GB, the 50GB drive is free.All programs are about 11GB, Win7 ultimate 64 is about 17GB so all together it should not exceed 30GB. Suddenly I found on one day that my user folder became 25GB without any reason. When looking into it and calculated all subfolders it even did not come to 1GB.So the C drive is almost full and I have no idea for the reason.
View 9 Replies View Relatedi had multiple systems (3) on my computer but mainly 1 i use everyday, so i formated the two partitions with the systems i dont need after a reeboot (like i ecpected) i had a bootmbr missing error. So i went and tryed using the repair function of the dvd but that dident work. So i installed a complete new system on one of the new partitions (i left the old one allown), after i installed the new system i booted up and installed easy bcd and added my old partition to my boot manager, but after i boot up I can see the boot menu and select the old system i want to start up from but it brings an error and tells me to enter the dvd and repair the system. I am so lost on this. why istent it just taking the files and booting? what did i do wrong
View 1 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedOh i can not get system restore to open but it works in safe mode not in regular mode.
View 4 Replies View Relatedis a system backup the same as a system image?
View 4 Replies View RelatedI have made a reformat on my hdd to install Win 7. But during install this message comes" Setup was unable to create a new system partiton or locate an exsisting system partiton" And if I start my computer without a DVD this message comes in the end "BOOTMGR IS MISSING"
View 1 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View Related