windows7 does not show my teac internal card reader on the my computer page....they are in device manager tho...when a card goes in it lights up but does not show up...worked on vista?
im on a dell dimesion ive searched dells website to see for a fix but found nothing so before i go out and buy another card reader that is 7 compatable i thought id ask you folks.
I am running Windows 7 32 bit and I'm having trouble with two out of three of my cardreaders after a new build (ASUS P8P67 Deluxe). The cardreader in my Canon MP960 has worked fine for several years using the same version of Windows in my previous build. Now, the drive shows up with a letter assigned, but the card is not detected when inserted. The same thing happens with my Sony MRW620 internal cardreader. The USB port on the internal reader works so I know it is connected to the MB .One more piece of data: If I plug my six year old SanDisk card reader in to a USB port, it reads my cards just fine.
View 2 Replies View Relatedi have strage thing going on when i try and use windows7 with my card reader it wont start up unless ive got a cradin it
View 2 Replies View Relatedit took me a while to find the right driver for my ACR38U card reader, but now I've found and downloaded it, it seems none of the sites that work with it (like tax-on-web) will open. It always says "impossible to open page". I'm new on Windows 7, so I quess it's some to do with "security" in "internet options", but I can't find it.
View 1 Replies View RelatedIf you have a laptop and have a problem getting the built in SD / MMC card reader to work then I've found the "generic" one from the Twinhead german site does OK. For X-64 use the Vista driver. Expanding the zip file will give you the 32 and 64 bit drivers.
The most "Generic" drivers seem to come from the F11Y laptop series but choose from other models if this doesn't work.
Most of these drivers are pretty "Generic" so should work with a huge amount of hardware irrespective of your actual model.
HP/DELL/COMPAQ owners are usually pretty lucky as the manufacturers sites are pretty OK. It's when you buy essentially an unknown brand of laptop where you can't find the "manufacturers" site as the laptop is badged under a different name. From the link just click on the Notebook model and get the drivers.
No stupid registration or "Let's scan your computer to see what driver you need" -- and then you are re-directed to a PAY service or more adware nonsense -- I HATE those sites --what if I'm using a different computer to get the driver than the one I install it on.
i am not able to find drivers for my laptop for magic gate or SD card readers,both of these are not working.
View 1 Replies View RelatedI have built them formatted them, fixed them added components many many times...This is my issue, Internet explore won't open....well it opens and I get a ap crash notification. I take out both of my different videos cards and use internal video and it does not crash. The problem is this is my living room movie file player and the video cards make a huge difference....I also need explorer as well....now Chrome works but that is not what I want..
View 4 Replies View RelatedI have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
View 3 Replies View RelatedI have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
View 9 Replies View RelatedI have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
View 4 Replies View Related"One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. I have 4 USB ports in the back which are connected to my printer, mouse, keyboard and external hard drive which are all functioning fine.
I have two USB ports on the front which are unoccupied. I have an internal memory card reader in this desktop, and that's the only thing I think it can be.
To resolve the problem it is asking me to reconnect the device or replace it. I have disconnected and reconnected th memory card reader while the pc was on, the pc recognizes a device has been disconnected and reconnected, but not what it is.
Under device manager, it says, "Windows has stopped this device because it has reported problems. (Code 43)" I have therefore disabled it for now, but would like to get it working. Do you think this problem wil be fixed automatically in an update sometime.
When I go to driver details, it says "No driver files are required or have been loaded for this device" And when I click on update driver, it says I have the latest driver.
Is it possible to use both the internal intel and a pci-e nvidia graphics card at the same time with two monitors on a Dell Optiplex GX280?
View 2 Replies View RelatedI have a 3.5" slot reader setup that after 2 years still wont load drivers. Supposedly this is a windows 7 PnP item but its never worked. EVERY tech I've ever talked to says its PnP so I replaced it with a new item thinking that'd fix it. Same thing. No update from the MOBO driver site either.
View 3 Replies View RelatedI accidentally deleted a photo from my Kodak internal memory card. It is not a removable card. Is it possible to retrieve the photo?
View 2 Replies View RelatedMy motherboard doesn't have firewire, and for the life of me i can't find a single expansion card that has an internal pinout that I can connect the cable for my front firewire port to. The closest I found was not low-profile compatible.and this is for the computer in my description, but on monday I'm switching out the case for a low profile hec 7K09 HTPC case.
View 6 Replies View RelatedI have a dell inspiron laptop with an Intel PRO WLAN card inside, and it no worky anymore. not sure what happened to it, but all things software cannot get it to function - its there; the drivers are loaded [latest greatest from intel] but it cannot receive a signal.Fortunately on this laptop its easy to get to it and R/R it uses a molex connector, spring retainers, so pretty standard easy thing. which card would be best in today's market?
View 2 Replies View RelatedI did a clean install of windows 7 but now my sd and memory stick pro readers doesn't work. It's a Sony VGN-NR310E. Windows 7 Home Premium 32 Bit.
View 3 Replies View Relatedi need better gaming and visuals, have the basic system S5750 i3-2310M/2GB/500GB HDD/if I can get ATIRadeon or NVIDIA graphics card fitted along with my IntelHD Graphics 3000.
View 1 Replies View RelatedCan I connect an Internal IDE DVD Writer and an Internal SATA DVD Writer to the same Motherboard?
View 6 Replies View Relatedi have windows 7 and my internal dvd rom will only work with dvds that have bytes installed on disk but will not reconize a blank dvd
View 2 Replies View RelatedI am unable to use the Windows 7 image backup program because it doesn't see my second internal hard drive. I can see the drive in disk management. ( it shows up as SDATA1 D drive) and has plenty of room left 400 gigs out of 700 gigs.
View 1 Replies View RelatedI recently had Windows 7 Pro installed onto my 80GB HDD. This was the only HDD plugged in when the installation too place.
Now, when I plug in either of my other internal HDDs, windows will not detect either. I have tried different jumper and IDE cable settings but it will not detect either of the other hard drives.
Also, while im thinking about it, what is the best way to set up in terms of HDDS and IDE cables and jumpers?
I guess windows 7 should be plugged into IDE 1 Primary Does it matter if i used IDE 1 secondary or IDE 2 primary/secdondary for disc drives and other internal hard drives? Should I have my windows HDD jumper set to 'master with slave' and any other HDD(s) set to 'slave'?
how to install windows 7 on an external HD (enclosure plugged via USB) in order to use it as primary internal HD.
View 2 Replies View RelatedI just recently updated from XP to 7 and everything was fine for a few weeks but that honeymoon seems to come to an end.
First symptom was that Messenger couldn't connect, and after a few days I uninstalled it and tried to re-install it. Well, the installer couldn't connect anywhere to get files and I decided to let it be.
Then I installed some new hardware and allowed Windows to connect somewhere to get the drivers (I don't usually do that, but with this hardware it has allways worked well) and it couldn't find anywhing this time. I just thought that 'well, windows, it's allways a different battle' and got the drivers from the hardware manufacturer.
Now I would really like to get the Messenger up and running again and tried to look at it again. I thought maybe I should do a windows update first and off I went. At this point I realized that the problem lies deeper than Live Essentials / Messenger. After just 1 or 2 seconds the update tells that some updates (=none) couldn't be installed + error code 8007273D which 'surprisingly'
From day 1 I've had Zonealarm and Avast! running, I've also tried with them turned on but no help.
Earlier today I uninstalled a small utility off of the system disc ("C" ) and immediately my Windows 7 system would no longer recognize my other two internal HDD's. Upon a restart, Windows again sees that there are drives there but has issues. At first I thought none of the programs would run, but upon starting Starcraft 2, I watched the sc2.exe file in take manager tick up the megs resident in memory. It took about 7 minutes before reaching 100 megs in memory then the screen went black as if the game was about to start up. At this point I'm watching on my second monitor (w/ task manager) the program loaded a full 125megs before slowing down.
I was never able to get it to start up and it does this every time. The same is true for any other program installed on that drive. I can browse it just fine and everything is where it should be -- I've tried running the .exe from the directory itself with the same result.I'm no Guru, but I'm fairly good with computers and have never seen anything even remotely close to this. I don't know if the uninstall is related, but it seems likely as it was right as that finished.
i have nero 6 & have just bought a new computer with windows 7. when i launch nero cd burning rom it tells me that i have an internal error when i drop & drag a song across from a cd.
View 1 Replies View RelatedI have had my Windows XP updated to Windows 7 by a computer tech. He promised 250 GB internal hard drive but I only received 80 GB. He installed an E Drive with 465 GB. Is 80 GB enough for Windows 7? Also, what can be manually stored in the E drive?
View 2 Replies View RelatedI have an desktop Asus with windows 7 Home premium. System has been working fine untill this morning. the CD does not display when I slect (My Computer). Also tried to bring up a dvd and nothing happens. Worked with Asus support. On the device manager the device shows location but has the Yellow error message. On trouble shooting I get ( HL-DT-ST DVDRAM GH40N ATA Device has driver problem). I tried fix it but it says no fix. We checked bios it shows there. Down loaded driver software no change. In device manager I slected unit, selected uninstalled. Restarted computer it recognized CD-Rom loaded software successvely. But still not showing
View 6 Replies View RelatedI have a notification popping up that says "The operation has been cancelled due to restrictions in effect on this computer. Please contact your system Administrator."I know why it is popping up, as I blocked a file from running in my O/S (Windows7-64bit Ultimate), but I would like to disable the message from appearing altogether, as it is so invasive that it will minimize fullscreen movies & apps and pop-up whenever it blocks the file from running. I am logged in to the only (Administrator) account on this computer.I know of 3 ways to restrict a file from running in Windows 7:1.Right-clicking the file and selecting "properties" and then modifying the permissions under "SYSTEM" to "Deny" "Read & Execute"2.Local Security Policy Console3.Group Policy ConsoleI guess my question is.. How can I make this notification 'silent'? (or disable the notification altogether)
View 5 Replies View RelatedI've been running my current set up for roughly two years and it has been fine until recently. My secondary drive for programs, storage, etc. will just disappear. It does not happen on any set routine or anything, just randomly.If I restart I do not get the drive back, however, If I shut it down and plug the drive into a different port it recognizes it again. I've gone back to the same port numerous times so none of the ports are bad.
View 5 Replies View RelatedI have S- TEK SU7130PCIA TV Tuner card. It works with windows XP, but now I want the drivers for window 7.
View 2 Replies View Related