Insert A Disc Into Drive E Windows 7?
Jul 7, 2012Whenever i try and insert a disc & click the dvd drive, it says "Please insert a disc into drive F:"
View 1 RepliesWhenever i try and insert a disc & click the dvd drive, it says "Please insert a disc into drive F:"
View 1 RepliesI'm re-installing Grand Theft Auto III on my Windows 7 laptop as the files got messed up. I insert the install game disc into my disc drive, I go into my computer to open it and it says 'Please insert a disc into drive D:' and just pops open the disc drive. I know some stuff about computers like a lot about GPu's, CPU's and ram and speed but I dont understand words like 'BIOS'
View 1 Replies View RelatedMy Emachine has Windows 7 Home Premium 64-bitWhen I turn on my computer I get a black screen with an error message and asking I insert the Windows Installation disc. Unfortunately, I don't have one. Never came with computer. The error message is regarding the following:File: BootBCDStatus: Oxc0000011
View 8 Replies View Relatedmy fs2004 does not open windows7 even with cd 4 inserted
View 2 Replies View RelatedWhen I am trying to install windows 7 It loads files / then when it reboots i get the windows boot manager saying
insert drivers disc if you do not have this contact xxx
windows.~bt/windows system32/drivers/vmstorfl.sys
status 0xc0000231
windows failed to load critical system driver missing or corrupt
I thought i may have been a bad copy . 3 different copy`s burned with different speeds/discs/ pc still getting error
I also tried to load vista and loads file and reboots
get a blue screen
abit nf7s 2.0
amd socket a 2600
2.5 gigs ram
ATI 9600 128meg agp series vidio
latest bios updated /
I have Windows 7 on a AMD Phenom Machine. Hard Drive died so I put another one in and restored Windows with Acronis True Image.
When I leave the Windows repair disk in the drive, the restored system starts perfectly, runs perfectly etc. But if I pull that repair disk out of the drive I get this error about "No Bootable Device" "Insert Disc". So in other words that repair disk has to be in the drive, else I get the error.
I have already:
1. Verified that the boot sequence points to my Windows Drive
2. Run system repair. That's useless. It just tells me everything is fine.
3. Run bootrec fixmbr, vixboot, rebuildbcd. No problems found
4. Run Chkdsk. No problems found.
I have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies View RelatedSo I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View RelatedWhenever i try and insert a disc & click the dvd drive, it says "Please insert a disc into drive F:" This happens whenever i put a burned disc. I earlier had Windows XP and i could read the dvd but i cant in windows 7. Also i could not read in vista. I tried in different machines. But it was recognised in all XP machines but not in Windows 7 or vista machines. Please tell me what can be the issue
View 1 Replies View RelatedI have Win 7 64, and when I insert a thumb drive in any of my front ports, I get a BSOD, system service exception, stop 03b.
4GB ram, Nvidia 650 using 15.51 drivers.
I attached my minidump file.
My system is a Hewlett Packard CQ 1040UK
AMD E350 1.60 GHZ
3.00 RAM
64 bit OS.
It is six weeks from new. When I load a dvd rom into the drive bay at the front of the computer the dvd is taken into the machine. When I try to play the disc I get the message 'insert disc'.Watching DVDs worked perfectly until a few days ago.
how to disable please insert na disk into drive/device/hardisk/DR3 message
View 1 Replies View RelatedMy DVD optical drive appears as CD drive and doesn't react to any disc. The latest driver is installed.
View 5 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
i used to burn my movies on *** dvd but when i tried to do so as usual this message appears"windows can't read the disc in drive e .make sure that the disc in *** format that windows can recognize.if not formate the disc first" there is no format option and i used to use this type of dvds and it usually works and when i but *** dvd that i was burn before, windows read it easy but not the blank dvds of the same type.
View 2 Replies View RelatedI am trying to access my BIOS,cannot use f8 or any f to access,cannot load from my original disc yet it loads when the hard drive is not installed?
View 8 Replies View RelatedI have a Sony Viao which does not have a disc drive and came with Windows 7 ready installed (installation was done automatically along side the process of starting computer up for first time after purchase). I cannot remember my administrator password which in itself has caused many problems; to get around this, I think I need to re-install windows - but to do this as a function on the computer (i.e. through the 'recovery' option on 'Assist' button/function) I must access it as an administrator. I think I need to reinstall manually through command prompt, can anyone tell me how to do this? Or do they have any additional advice?
I don't have a Windows 7 disc (I've seen the 'creating a bootable USB installer' videos etc, but these seem to require a disc with windows on from which the USB is made, which I don't have!) Hence I think I need to go through command prompt...
My computer literacy is not very good and I am, to be honest, at a loss of how else to get around this problem(and I would rather not spend a massive amount of money I don't have sending it to a PC shop, if i can help it)...the computer itself is not old (it was brought in August 2011) and already once or twice there had been an issue with Windows were an error occured and it appeared to 'forget' windows existed (box appears saying "operating system not found..."), I switched it to 'safe mode' and restarted it and the problem appeared to correct itself but...
Please help! The problem is fairly urgent! I am also worried that it has a virus as I haven't been able to install new anti-virus software (requires admin password for installs etc) and hence I would like to correct the underlying problem of having no administrative authority to correct other problems asap!
I am trying to install Windows 7 onto my laptop as I want to do a clean install to wipe off everything and have windows freshly put on. My cd/dvd drive cannot read the disc. You can here the drive attempting to load up the disc but to know success. I have tried Microsoft Fix, does not work (however, it has in the past as well as booting from disc at startup-that too has worked in the past), I have tried booting from the cd/dvd drive on bootup, I have attempted to go into the registry and delete lowers installers I think its called (I didnt do this on previously installation attempts and I installed fine). I have all correct drivers according to my laptop, plus I've gone into the packard bell website to download the correct drivers and I have used windows update too in case I am missing anything. Nothing is working.
View 9 Replies View RelatedFORMATING my C drive and how to reinstall windows 7 again with the help of recovery disc.
my computer was formated and windows were reinstalled but it was not done by me. I have the recovery discs provided by the hp laptop company.
i have windows 7 home premium 64 bit.My device is HP DV6 6121tx
I have installed new windows 7, on my previous windows 7. Till that, I have saved my important files in Local disc D. Windows is installed on local disc C. But previous windows version moved moved to D disk. And my files, that were in D disk, have lost. What can I do for moving back my files, which are very important for me??
View 9 Replies View RelatedThis is the first time am posting in this forum. Internet is working fine in my machine in wired modem as well as wireless wi-fi modem. But whenever i try to connect an USB modem data card for internet, it gets installed for mass storage alone and nothing gets installed for internet. And yes, the USB port works GOOD for all pen drives. This problem occurs only when i connect an USB data card and the following error message pops up. It doesnot buzz off till i remove the USB from the machinethere is no disk in the drive. please insert a disk into drivedevicehardrive2dr2..
View 2 Replies View RelatedWhen I first use my Drive E and insert a disc it works fine. When insert a second disc later I keep getting the information from the first disc and cannot use Drive E for another disc until I reboot. I do have another drive (F) but would really like to resolve this problem.
View 8 Replies View RelatedHow can I solve this problem?My Acer computer disc drive has always ejected discs whenever I try to insert themI never receive any error message, it will not even try to pull the DVD or CD in.
View 3 Replies View RelatedIm attempting to upgrade from vista 32 to windows 7 on an hp compaq presario cq60 with and AMD athlon Dual Core @ 2.10ghz. When i place the windows disc into the dvd drive nothing much happens. It makes a few noises then nothing. It's an optiarc dvd rw drive which otherwise seems to be working fine. I've already used the 32 bit and 64 bit discs to upgrade on my two other machines so i know there isnt a problem with them. I have checked that the drive is first in line for booting the machine but to no avail.
View 7 Replies View RelatedI'm moving from Vista Home Premium to Windows 7 Pro and originally thought about a dual boot. But I've convinced myself that I won't use Vista once I get everything reinstalled in Windows 7, and now wish to install Windows 7 Pro on a new drive. I'll take my Vista drive out, install the new drive and load Windows 7, and then, put the Vista drive back in as a secondary so that I'll have easy access to all my data as I complete the changeover. I can then use the Vista drive as a backup, etc.
I've ordered the Windows 7 Pro upgrade disc. Question is, do I need to reinstall Vista on the new drive before I put in the upgrade disc? Or can I just put in the new drive, boot Windows 7 from the install disc, and then insert the Vista disc if it asks for the qualifying media (or does Windows 7 even ask for qualifying media?
my pc installs by itself disc drive a, i uninstall it but when i'm running again my pc installs it back! i have windows 7 64.
View 5 Replies View RelatedIs there any way to use a windows 7 Ultimate Upgrade disc as a installation disc? Or would I have to go out and get another Windows installation disc and then use the upgrade disc?
View 6 Replies View RelatedHow do I change my default disc drive from G to L? My old DVD/RW drive is not compatible with Bluray discs.
View 3 Replies View RelatedI am trying to run memtest on a new build and for some reason, the machine will not boot from the disc drive. I'm positive that it CAN boot from the disc drive because I just installed windows 7x64 on it last night. I have already configured the BIOS to boot from CDROM as it's first choice and selected to boot from CDROM thru the boot menu. I am 100% positive that this memtest disc is good because I just successfully ran it on my main machine with no problems.
ps. to power the disc drive I am using a 4-pin molex to SATA adapter since my PSU only has 2 SATA pwr connectors and they are being used to power my 2 HDD's. I don't know if this has to do with it...could it be a bad adapter not powering the drive at initial startup? Bear in mind that the drive works fine once I'm in the OS.
All of a sudden about two weeks ago one of my ports for my wireless router dongle decided to quite so I used another and after a couple days that quit as well. Now none of the four work nor does the disc drive. I have tried everything to attempt to correct this but I get the same result. I don't know if it is in the system configuration I am missing or the CPU board going bad. I would hate to buy a new board and have the same results their by telling me it was the Windows 7 software all together. I could re-install Windows 7 but I do not want to delete all my programs I use that are loaded.
View 10 Replies View RelatedMy external cd/dvd drive connected to my laptop won't recognize any dvds but will recognize cds. The computer says I might have to format it but doesn't show me how to do it.
View 1 Replies View Related