There Is No Disk In The Drive Please Insert A Disk Into Drive?
Oct 9, 2012
This is the first time am posting in this forum. Internet is working fine in my machine in wired modem as well as wireless wi-fi modem. But whenever i try to connect an USB modem data card for internet, it gets installed for mass storage alone and nothing gets installed for internet. And yes, the USB port works GOOD for all pen drives. This problem occurs only when i connect an USB data card and the following error message pops up. It doesnot buzz off till i remove the USB from the machinethere is no disk in the drive. please insert a disk into drivedevicehardrive2dr2..
Whenever i try and insert a disc & click the dvd drive, it says "Please insert a disc into drive F:" This happens whenever i put a burned disc. I earlier had Windows XP and i could read the dvd but i cant in windows 7. Also i could not read in vista. I tried in different machines. But it was recognised in all XP machines but not in Windows 7 or vista machines. Please tell me what can be the issue
My system is a Hewlett Packard CQ 1040UK AMD E350 1.60 GHZ 3.00 RAM 64 bit OS.
It is six weeks from new. When I load a dvd rom into the drive bay at the front of the computer the dvd is taken into the machine. When I try to play the disc I get the message 'insert disc'.Watching DVDs worked perfectly until a few days ago.
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
I don't know if this is the right place to put this thread, anyways, When i open my disk drive it suddenly gets jammed and will not open until I slam my hand on the computer itself Is there something i should buy to get it unjammed or something?
I am installing a game cd. when i insert that particular dvd and when i try it to open manually a dialog box shows that insert a disk to g drive, and the computer is ejecting that disk. when i try with another cds or dvds it works properly
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD 2) clone C: to SSD only 3) clone D: E: F: of old drive to new drive. 4) remove old drive.
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
I am trying to use a 64 GB usb stick. When I put the stick into a USB port, it shows up on my computer, but when I click it to open, it asks to insert a disk in the drive. How can I correct this?
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
For about the past 2 weeks my computer has been becoming slower and slower on startup, and just general usage. And so today I decided to take some actions to try to make it startup faster and just run faster in general. So i ran msconfig, disabled some startup entries and some non microsoft services. Also, knowing that disabling the boot GUI made the computer startup faster, I disabled that also. Then when I went to restart, I ran into problems.
When I turned the computer on I knew it wouldnt show the bootGUI and so I let it just sit and do its thing. After a very long 15 minutes (longer then it ever had been before) with just a black screen, I held the power button to turn it off. Then turned it back on, and got to the windows recovery window. So I hit f8, went into safe mode, loaded up msconfig, and enabled the bootgui, and restarted.
This time it showed the boot gui. However, once the windows logo was shown for about 15 seconds it switched to a screen that said "Windows is loading files" With a loading bar under it. I had never seen this before so I just let it load at first. As I was waiting for it to load I went and got dinner. Roughly 30 minutes later I went back and it was still stuck at not eve 1/4th of the way. So I held the power button again, restarted, went through the whole process again and then it brought up a message that said the communication with the device was gone. And that it happens when you pull a flash drive out or a hard drive or DVD drive looses power.
I do not think that my hard drive is going back. It is about 5 months old. Along with the rest of my computer. Pretty new. 5 months about.
Here are the drives I have on my computer: -Windows 7 installed on a 1TB drive -Windows XP on a 500gb drive -2TB drive for storage. -1TB drive for storage -500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
Recently I can't play any DVD disk with my HP Dv3 DVD drive, once inserted a disk after auto play start it crash to blue screen. I have tried with an external drive same problem.
I have installed a new W7 64 bit OS, plus a 32 bit (default install that I was unaware of) version of Office 2010. Everything appears to be working great except that I receive a dialog box request to insert Disk in drive/device 1v (It was 2 untill I switched two of the usb plugs.) I did notice that the OS sees my HP MFP as a disk drive.
the hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover