Insert A Recordable Disk?
Sep 29, 2011I have installed dvd burner. When i insert a cd,it tell me insert a recordable disk.
View 1 RepliesI have installed dvd burner. When i insert a cd,it tell me insert a recordable disk.
View 1 Repliesim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedI have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedWhen starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies View RelatedI started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
View 4 Replies View RelatedI am trying to use a 64 GB usb stick. When I put the stick into a USB port, it shows up on my computer, but when I click it to open, it asks to insert a disk in the drive. How can I correct this?
View 1 Replies View Relatedno bootable devine for acer win7
View 1 Replies View RelatedWhenever i try and insert a disc & click the dvd drive, it says "Please insert a disc into drive F:" This happens whenever i put a burned disc. I earlier had Windows XP and i could read the dvd but i cant in windows 7. Also i could not read in vista. I tried in different machines. But it was recognised in all XP machines but not in Windows 7 or vista machines. Please tell me what can be the issue
View 1 Replies View RelatedFor about the past 2 weeks my computer has been becoming slower and slower on startup, and just general usage. And so today I decided to take some actions to try to make it startup faster and just run faster in general. So i ran msconfig, disabled some startup entries and some non microsoft services. Also, knowing that disabling the boot GUI made the computer startup faster, I disabled that also. Then when I went to restart, I ran into problems.
When I turned the computer on I knew it wouldnt show the bootGUI and so I let it just sit and do its thing. After a very long 15 minutes (longer then it ever had been before) with just a black screen, I held the power button to turn it off. Then turned it back on, and got to the windows recovery window. So I hit f8, went into safe mode, loaded up msconfig, and enabled the bootgui, and restarted.
This time it showed the boot gui. However, once the windows logo was shown for about 15 seconds it switched to a screen that said "Windows is loading files" With a loading bar under it. I had never seen this before so I just let it load at first. As I was waiting for it to load I went and got dinner. Roughly 30 minutes later I went back and it was still stuck at not eve 1/4th of the way. So I held the power button again, restarted, went through the whole process again and then it brought up a message that said the communication with the device was gone. And that it happens when you pull a flash drive out or a hard drive or DVD drive looses power.
I do not think that my hard drive is going back. It is about 5 months old. Along with the rest of my computer. Pretty new. 5 months about.
System Specs:
Mainboard: MSI 970A-G54
Processor: AMD FX 8120 8 Core Processor
Ram: Patriot DDR3 8GB
Kingston DDR3 4GB
Graphics: 2x MSI N210's
Here are the drives I have on my computer:
-Windows 7 installed on a 1TB drive
-Windows XP on a 500gb drive
-2TB drive for storage.
-1TB drive for storage
-500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
My system is a Hewlett Packard CQ 1040UK
AMD E350 1.60 GHZ
3.00 RAM
64 bit OS.
It is six weeks from new. When I load a dvd rom into the drive bay at the front of the computer the dvd is taken into the machine. When I try to play the disc I get the message 'insert disc'.Watching DVDs worked perfectly until a few days ago.
Recently I can't play any DVD disk with my HP Dv3 DVD drive, once inserted a disk after auto play start it crash to blue screen. I have tried with an external drive same problem.
View 6 Replies View RelatedI have installed a new W7 64 bit OS, plus a 32 bit (default install that I was unaware of) version of Office 2010. Everything appears to be working great except that I receive a dialog box request to insert Disk in drive/device 1v (It was 2 untill I switched two of the usb plugs.) I did notice that the OS sees my HP MFP as a disk drive.
View 2 Replies View RelatedEach time i insert dvd/cd and open my computer to check.
It shows me empty disk.
why?
the hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover
View 1 Replies View Relatedi have a aspire one d255e , on start up it is asking me for boot disk ?
View 2 Replies View RelatedPretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot.
View 9 Replies View Relatedhow to disable please insert na disk into drive/device/hardisk/DR3 message
View 1 Replies View Relatedlaptop show icon of usb but when open that time asked insert a disk
View 1 Replies View RelatedMy lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies View RelatedI recently did a whole new build, new hard drive, mobo (GA-P35-DS3L/S3L) and processor. The problem is, I'm trying to install Windows 7 Ultimate and I come up with "Insert system disk and press enter" error when I try to boot from the disk. I checked the BIOS and the mobo had recognized the DVD drive and the hard drive. I tried putting the hard drive under slave and the DVD drive under master, and vice-versa. I am a high school student who generally gets lots of home work, so it would be nice to be able to type out my work.
View 2 Replies View RelatedThis is the first time am posting in this forum. Internet is working fine in my machine in wired modem as well as wireless wi-fi modem. But whenever i try to connect an USB modem data card for internet, it gets installed for mass storage alone and nothing gets installed for internet. And yes, the USB port works GOOD for all pen drives. This problem occurs only when i connect an USB data card and the following error message pops up. It doesnot buzz off till i remove the USB from the machinethere is no disk in the drive. please insert a disk into drivedevicehardrive2dr2..
View 2 Replies View RelatedI have a samsung dvd writer my specs are os windows 7 ultimate 32 bit primar and secondary hdd 160 gb [code] i also have an asus dvd writer along with the samsung dvd writer.My dvd writers were working fine until after a failed burn attempt after which my computer freezes whenever i insert a dvd in the dvd writer.
View 7 Replies View RelatedI'm re-installing Grand Theft Auto III on my Windows 7 laptop as the files got messed up. I insert the install game disc into my disc drive, I go into my computer to open it and it says 'Please insert a disc into drive D:' and just pops open the disc drive. I know some stuff about computers like a lot about GPu's, CPU's and ram and speed but I dont understand words like 'BIOS'
View 1 Replies View Relatedi want ask , my USB First insert / detected is slow , then after i plug out and pluggin again , the usb is fast detected ... it's normal like this ? or have something problem with my driver or OS?
View 2 Replies View Relatedmy fs2004 does not open windows7 even with cd 4 inserted
View 2 Replies View Related