Hung Up On System Restore?
Nov 30, 2012
Last night I chose to hibernate rather than to shut down. This morning when I woke it up outlook wouldn't start. I clicked the icon a bunch of times out of frustration then the screen went dark and the tower started beeping. If I remember correctly it was three long tones in succession repeating. I forced it to power down holding the power button, restarted it and went to the recovery/repair options. I started a system restore to which I had only one option to restore to a windows update from 12:01am this morning. The SR started but has been hung on "restoring files" now for over two hours.Not that it makes much difference but it's an HP h8-1260t with windows 7 pro.
View 1 Replies
ADVERTISEMENT
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Aug 26, 2012
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Feb 15, 2012
System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies
View Related
May 19, 2012
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies
View Related
Jan 14, 2013
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies
View Related
Jan 18, 2013
My daughter has a download of a paid for app stuck at 100%. If we reboot the computer and go to the download site it comes up at 100% and spins. We cleared the browser history and rebooted also same thing. Is there a way to delete what's already been downloaded and start over.
View 1 Replies
View Related
Mar 9, 2012
two days ago window updates automatically downloaded on my one year old Toshiba laptop with Windows 7 Home Premium. Now I cannot get passed the welcome screen. There is no way to run a repair disc because I cannot get pass the welcome screen after typing in my password. I can go into safe mode or safe mode command prompt. But then what? The task manager screen just freezes up. The only escape is to unplug the computer and remove the battery and start all over again. Then the same thing keeps happening? Is there any solution to this problem?I can get to a screen that says Administrator: cmd.exe Microsoft Windows [Version 6.1. 7600]
View 9 Replies
View Related
Jul 4, 2011
The latest Windows Update that imposed itself onto my machine (A six-pack) is not installing but seems to be freezing, unfinished. At least, its not finishing number 1 of six in many hours. So it's either a ginormous update, which I doubt, or summats up. For three days I have been having to switch off power and reboot "Windows Normally" to access my stuff. What I would like to do is get rid of this six-pack that wants to update so where to find it and how to squash it out of existence?
View 2 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Feb 8, 2013
For the last 2 days I have been trying to do a full virus scan with Microsoft Security Essentials (MSE) and it gets hung up every time on WindowsSystem32CodeIntegritydriver.stl It will do a quick scan just fine but that is it. When it gets hung up on this file I try to cancel the scan and end up having to use the task manager to close out the program and then I have to reboot my computer to have MSE working in the taskbar. I have tried uninstalling and reinstalling, removing programs that were recently installed, I ran malwarebytes and that came up clean, I tried restoring to an earlier time and that didn't work, I tried safe mode and it did not work. I do not have a wireless mouse or wireless keyboard. Some sites suggested that might be a problem. I installed and tried Super Antispyware and that did not work properly so I uninstalled it. I do not know what else to do. I sure would feel better if I knew my antivirus program would do a full and complete scan. It is always the same file that it gets stuck at. I even tried putting that particular file in the excluded files within the MSE program and that didn't work either. It just kept trying to scan it. I have Windows 7 Home Premium with 64 bit operating system. With having our Church records, our business files and then of course my personal files/pics it always makes me nervous when something isn't working properly.
View 14 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Jan 30, 2013
ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies
View Related
Feb 6, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies
View Related
Sep 30, 2012
I recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .
View 1 Replies
View Related
Mar 23, 2010
I can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
View 5 Replies
View Related
Feb 8, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
View 1 Replies
View Related
Mar 21, 2011
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
View 4 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
Feb 27, 2010
How to Automatically Create A System Restore Point at Startup ?
View 0 Replies
View Related
Oct 8, 2011
I have a problem with view and track downloads in that a file has stopped downloading although it says its resuming.I cant delete it and as its there it is preventing me form opening pdf downloaded which I use many times a day.how I force the download to compelte or remove from the list?
View 9 Replies
View Related
Jul 14, 2012
I had to force shut down my new build(2 weeks old ). I hooked up a new monitor,plugged in an Oxygen Keyboard(piano) for the first time and tried to plug the keyboard(typing keybaoard ) into a usb port,which for some reason didn't work and then Windows 7 started searching for drivers and couldn't find whatever driver it was looking for. No, problem until I went to run aida64 and it froze on the opening page,I force quit it in task manager then tried to restart and it froze on"windows is shutting down".After I forced the shutdown by holding down the power button I restarted and everything seems to be cool,aida64 opened up ,programs seem to be responding. here's what the win 7 report said: roblem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional information about the problem: BCCode: 1000009f BCP1: 0000000000000004 BCP2: 0000000000000258 BCP3:FFFFFA8018B84660 BCP4: FFFFF80000B9C3D0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:WindowsMinidump�71412-18610-01.dmp C:UsersGrantAppDataLocalTempWER-28236-0.sysdata.xml Read our privacy statement online: here is the zip of my dump file and system health report Attachment 221419?
View 5 Replies
View Related
Oct 23, 2011
I installed a raid combo card with sata and ide and also hooked up two ide drives
now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
View 2 Replies
View Related
