I put my computer on hibernate like i always do then went to finish my essay and it wouldn't start it just stayed on a black screen saying starting windows yet the flag wasn't appearing. I did the memory test and the diagnostic the only test that failed was the hard drive 1. I've tried launching the repair but it just stays on a blue screen.
View 1 RepliesWhen i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
So I built a new computer, and I was happy that everything started up but then windows won't I get this error:
Problem event name: StartupRepairOffline
Problem signature 01: 6.1.7600.16385
02: " "
03: unknown
04: 21201151
05: Autofailover
06: 02
07: NoRootCause
OS version: 6.1.7600.2.0.0.256.1
Local Id: 1033
Where do I start?
whenever i try starting my computer up it say windows then after that black screen and i only see the cursor startup repair used to work but i dont want to loose my files because there s stuff like norton that i paid for
View 1 Replies View RelatedMy problem is that windows 7 won't start on my computer, it keeps saying "bootmgr missing, press ctrl+alt+delete to restart" (this is not 100% word for word but it is what it means), here is a little background of what is going on:So I bought a 500GB WD hard drive, the reason why I bought this new hard drive was because my dad's old computer (the one he gave me cause I needed one for school) did not come with one (he took his old hard drive cause it had his work in it). After that, I took just the my new drive to my friend's house to format the hard drive to NTFS format, and I made 3 partitions, 'x', 'y' and 'z', with 150GB, 150GB and 200GB respectively.After that, I downloaded Windows7 from a microsoft sponsored website for free (because I am an engineering student at a university), and I am 100% certain that this website is good because I have downloaded from it before and it worked perfectly fine on my mac (I installed windows 7 on my mac using boot manager).
I installed windows7 to this new hard drive (partition 'x'), and everything went fine, set up computer name, copy some school files into the new drive.Now here is the problem, when I take it home and try to run from my computer (with only this WD 500GB drive in it, it is the only one I got), it doesn't work, I googled some solutions and found out that I had to set one of the partitions as active, so I went back to my friend's house and set partition 'x' as active (the partition where I installed windows7, partition 'y' and 'z' are just to store files, maybe I'll install Linux in the near future).After that, I disconnected all of his hard drives with only mine left connected to the computer, nothing was changed in the Bios, when we try to boot up with only my hard drive in it, it says "bootmgr missing, press ctrl+alt+delete to restart", which makes absolutely no sense.I connected his hard drive back, and once we boot the computer it asks us which windows to boot from, we selected mine and it boots up just fine. I do not have the windows7 disk, I only have a downloaded file which is an .ISO image
My computer crashed while performing an update I think. I saw that it was performing updates so I went to do something else. When I came back computer was off. I tried to turn it on but it gets to the screen where I usually enter my password and stops there (before the login window appears)
Tried Launch startup repair but didn't work Tried Safe Launch but didn't work Tried booting from last known good configuration but didn't work Tried repair your computer but all I get is 'Windows is loading files' then it goes to the login screen but nothing appears. Can't find my install disk...
Sometimes before it crashes I see a blue error screen flicker but it's gone before I can read it.
Also ran a memory diagnostics tool. It says that no problems were detected but I can't see the actual results because they are displayed after I log on but I don't get there
Yesterday evening, 14 Dec., when shutting down the computer, 10 updates were received. This morning, 15 Dec., when booting up for the first time, I was presented with the green screen that said "Preparing to Configure Windows. Do not turn off your computer." It has been sitting there like that for over an hour and a half. I think something may have gone wrong
View 5 Replies View RelatedI may have made a boo boo. I bought a used computer today without an HDD or an OS. I had an old XP computer that had two 1TB drives. I installed a legitimate upgrade of Windows 7 on the C: drive over XP and put it in the new computer. Now, it won't start, and startup repair does nothing. I don't have the XP disk since I bought the computer 7 years ago, and it disappeared since.
View 13 Replies View RelatedMy friend was having problems with her computer. So I ran a few programs to check it out and clean it up.. (AVG, CCleaner, AntiMalware...) But then after running the last one and rebooting, the screen goes black once Windows starts to load. Then the mouse appears but still nothing. I tried safe mode and still nothing... Not sure what to do, but just gaining access to copy files to an external hard drive is important. I was planning to reformat anyways..
View 3 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M500, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3836 Mb
Graphics Card: AMD M880G with ATI Mobility Radeon HD 4200, 320 Mb
Hard Drives: C: Total - 460935 MB, Free - 398933 MB; D: Total - 15699 MB, Free - 2579 MB;
Motherboard: Quanta, 3638
Antivirus: Microsoft Security Essentials, Updated and Enabled
Intermittent start up fails, computer runs start up fix that restarts and opens windows 7.
is this just internet explorer starting as soon as i turn on the computer? If so, i need to delay it til i decide to go to the internet.How? i went to windows defender and i can't get it figured out. i don't see the option.Also i am getting error 101 boot performance monitoring. Is this related?also, i just checked in the event viewer, and i have 4 critical error 351- stand by performance monitoring. not sure if its related. I just want some direction on how to get these errors to stop popping up and have my computer running properly and to its fullest capacity
View 3 Replies View Relatedmotherboard emx-amd780-acc everything is fine until I added 2gb of ram to make it 6gb, ddr2 800 kingston that my pc wont start windows764bit but when I removed the 2gb stick computer it runs perfectly well,me as I know my motherboard accept thru 8gb of ram.
View 1 Replies View RelatedI have tried to start my laptop normally and in safe mode and it send me to start upi repair, this runs for two days and then I get an error message about no communications code 0xc00000e9
View 2 Replies View RelatedMy computer won't start after Windows 7 critical update 1/11/13. I was able to start in safe mode and restore to an earlier date. However, that only worked for 1 day. Now it won't connect to wireless either.
View 4 Replies View Relateddoes anyone know what I can do about this problem?
View 1 Replies View RelatedJust finished installing Win 7 64 bit on my Dell Inspiron 1545. It appeared the update was going along smoothly until it came time to reboot. After rebooting, the laptop showed that it was configuring Windows. Once the configuration was completed the system went into Startup Repair. Once completed and checking the Repair Details it shows a message indicating that ci.dll is corrupt. I was able to restore the computer to original state, but once I downloaded the 80 or so win 7 updates, I get the same problem.
View 2 Replies View Relatedexample: Playing Diablo III while talking with friends on mumble. The game suddenly freezes and I wait to see if it shoud come back, and it never does.So I press Ctrl-Alt-Del to close the program, and the status says "Not responding" I close the program and wait like 5-10 sec until I can see it's closed in "task manager" and i try to start the program again.This happens, the cursor shows that it's "thinking" for like 2-3 sec, then nothing happens. Same problem occurs with Skype, these are the programs im 100% sure to crash everytime.I've tried to open them all as administrator.Tried compatible modessystem recoveryStart up Repair (windows 7 feature I believe)
View 3 Replies View RelatedI recently tried to build a computer and failed epically. So I put my hardrive back in my old PC. Upon booting the PC it runs fine until it reaches :starting windows".
Where it freezes, and then restarts.
whenever i start up my computer, windows seems to disable both my sound and network drivers, so everytime i start my computer i have to go into device manager and disable, then enable my network controller (for the internet) and my creative soundblaster card so they start working again.This is very annoying, also the time it takes for my computer to load is ridiculous, what could be wrong, do i have a virus?
View 1 Replies View RelatedMy computer won't startup in normal or safe mode and I was told my windows 7 may be corrupt. I am trying to reinstall it, but I'm not sure how. I place the disc in the drive and rebooted the computer but it didn't work. The system repairs won't work, nor will system restore. Is there a command prompt or anything?
Desktop
Ibuypower WA 910i
64-bit
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies View RelatedI am unable to connect to the Internet on wireless home network.I have carried out the following:'Click Start, type services.msc, then press Enter. Scroll down to "WLAN AutoConfig" and right click on it and select Properties. Set it to Automatic and not Disabled, and press the Start button, then click OK.That should start the service.'I received the following message:"Windows could not start Wired AutoConfig Service on local computer.Error 1068: The dependency service or group failed to start."
View 1 Replies View RelatedSometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
View 1 Replies View RelatedI'm having some trouble starting my computer (posting from somewhere else). When I try to start it, it takes a long time then goes to a screen asking me to start the startup repair. When I do, it just seems to be frozen on some of the screens for a very long time and has never moved past it.
View 14 Replies View Relatedi hope i'm placing this in the right section, if not, then could someone tell me where to put it and i'll post it again.i've got a samsung rv510 laptop with windows 7 hp 64 bit.about 2 weeks ago, i was watching a Internet video, had spotify and facebook open too, and my computer suddenly went all bsod on me.i turned it off and on again. it came up with a message like 'a problem has occurred whilst loading up your computer, what would you like to do?' i chose 'launch startup repair', which takes a couple seconds, then i choose the other option of 'start windows normally'. i could get onto safe mode. sometimes it would say 'operating system not found.'the computer will then load normally and i can be on it fine.however, i then started to get norton confidential and shockwave flash crashes in google chrome. i disabled norton confidential and thus didn't get that error anymore. shockwave flash however did still occur as disabling it means i can't watch Internet videos and do some other stuff. sometimes my screen would go blank, and it looks like chrome refreshed itself due to some problem.i then used norton power eraser (i have norton internet security 2011 otherwise, and i did many live updates and scans to see if there was anything there, but nothing) to see if there were any problems. it came up with one file that was a possible threat which was msvcrt.dll so i did as it recommended and deleted it. i restarted the computer and now i can't it won't go past the windows logo without freezing.i had some start-up error in the past (a few months ago) and i was sent two cds to correct the problem and they worked. one cd was labelled 'windows 7 hp 64bit' and the other was 'samsung rv510 driver disc'. i got this laptop, via the disability students allowance, from a company. i haven't contacted the company yet about this problem, but i will be doing so very shortly, because if all else fails, i'm just going to try and get this laptop replaced as i'm not 100% happy with it.i have put in both cds in, the driver one doesn't do anything, but the windows 7 hp 64bit one does. it asks me if i want to continue with the thingy, so i press a button to continue. it tries to fix the start-up, but fails. it says that 'a recent hardware or software change might be the cause'. then tells me to insert the installation disc and do some other things, but i don't have that disc. the company could give that to me.
View 1 Replies View RelatedI have Windows 7 64 bit on my desktop and an OCZ Vertex SSD Boot Drive (C:) my computer has a second hard drive (1tb Samsung Spinpoint F3) for other files. My HDD has two partitions and one of them had Ubuntu on it. I decided to format that partition the other day so I could have access to it (I needed the space). Turns out I formatted the grub launcher from there and now have no way to boot my windows installation. I've tried Startup Repair.
View 2 Replies View RelatedSo last night I came back from going out. My computer was making an annoying noise, really hard to explain almost like a sound when your hard drive is overworking or really old.... My computer isn't even a half year old. I was to tired to try anything so i just hit the turn off buttonI had to go to work early this morning so I just got home. I tried turnning it on this afternoon, it didn't normally. Gave me an option to start normally or safe mode. I tried to start normally. Windows started and then just froze. Keep in mind the Hard drive or w/e is making this noise still while trying to start windows. So since that didn't work I tried to start in safe mode. This didnt' work either and gave me the message about my SATAo drive or something not working properly
View 9 Replies View RelatedMy problem is the system goes through regular BIOS Startup, and shows everything as working, then when it gets to the windows startup screen (where the 4 colored dots turn into the windows symbol), it does one of two things:
1. it just keeps waving there (you know how the colors kind of come out and in etc.)
2. it goes to a black screen, and none of my inputs work (ie. no keyboard mouse, ctrl+alt+del, anything)
The only way to get out of these two situations is to reset directly on the case.
Sometimes it will not go to the startup screen, and will give me the option of "launch startup repair" or "start windows normally". If I choose start windows normally, it goes to one of the top two problems, if i choose startup repair, it begins loading windows files, then the bar stops halfway (and doesnt move for over 8 hours).
The last thing i tried was starting from my windows 7 dvd, and that also begins loading files, then stops halfway.
i downloaded Comodo CIS yesterday (after uninstalling Avira) with no problems, but this morning my Acer One d270 was unable to start giving a black screen, and i clicked enter on the option to use ''Start up repair'', which only seemed to show the following 'Unspecified change to system configuration may have caused the problem error code = ox490' I managed to start in normal mode in the end and everything seem to be working ok as far as speed etc gos. I installed the VMware - Toolwiz Timefreeze, a couple of days ago. Before that i installed Sandboxie, but then uninstalled after it caused BSOD which according to the dump file was caused by the Intel Graphics Accelerator Drivers for Windows 7(R) file - igdkmd32.sys.I noticed that for sometime before the latest downloads that when running windows ''fix problems'', that it says i have too many programs running on start up ,so today i disabled, adobe reader + acrobat, google update , and toolwiz so they are not running on start up. I also have Rapport installed and running but its not showing in msconfig start up list so not sure about it. I'm assuming Word,excel,ccleaner,glary utilities, are not running on start up but dont know how to check!
View 4 Replies View RelatedWith Sandy visit in my area, I've lost power couple of times with the computer being on. It had no issues starting it up, other than Windows complaining about not being shut down gracefully. While I have had power for the last 4-5 days, yesterday the utility power went out with a big boom. I have the generator running and now the computer does not start at all. The LED light is on for the motherboard, indicating that the power is on for the board. Pushing the power on button results in nothing, the system does not start up.
View 2 Replies View RelatedDue to sudden power failure my computer was suddenly shut down.Now it start through open window with safe mode only.How to start my computer with normally?
View 1 Replies View Related