How To Remove Readonly Attribute On Folder
May 30, 2012how to remove readonly attribute on folder
View 2 Replieshow to remove readonly attribute on folder
View 2 RepliesThings I have tried:
1) Enabled hidden administrator logon and logged onto it.
2) Edited user permission for entire drive and set to 'full control'
3) verified the folder is not locked/in-use even deleted it and then restored
Still has the stupid 'read only' box checked when you hit Properties. I am updating Starcraft 2 and get a file creation error during patching. The read only setting is the only thing I can think to change other than full uninstall -> reinstall.
edit: Just tried doing it in elevated command prompt and the R flag for readonly is not present at all even looking all sub-folders with the /S switch. So apparently its not read only but explorer is noting it so in 'properties' ... very strange.
I've had this problem for a while now. I'm using Windows 7.Most of the locations on my computer are set to read only. If I try to save something it usually doesn't work, unless I save it to my desktop, open the location I want to save it to in windows explorer, and move it there, at which point it will tell me that I need administrator permission to move the file there, and I have to click "allow." This affects a lot of my programs in various ways. Chrome stopped recording my internet history, (I assume because it can't save the history to whatever location it goes to), I can't use LifeFrame to record video or take pictures or anything like that, (again, I assume because the folder it saves to is in read only mode), and a lot of other stupid things.
If I right click and go to "Properties" and uncheck read only mode and then click ok, it doesn't work. If I go to properties again I can see that it hasn't changed.I looked on the internet somewhere and it said to use the command prompt to do something like "-r +s c:lahlahetc." I played around with that and it was also unhelpful. When I ran the command prompt normally, it told me that access was denied, and when I right-clicked and ran as administrator, it didn't give me an error message of any kind, but it still failed to change the folder from read only mode.
I am using the administrator account (which is the only account other than the Guest account I have set up).
I use Adobe Lightroom 4 to manage my photos. I had to reload my photos the other day. Today I was making changes in the data in my photos, when I finshed and saved the data I recevied a message that the photo was Read Only. Inless I get this resolved I will not be able to edit any of my prints.
View 4 Replies View RelatedToday I was trying to create a VirtualBox VM that had direct access to a partition which is the only one on its disk. This partition contains non-OS-specific data (including documents and music). The guest OS is Xubuntu and the host OS is Windows 7.I succeeded in making the disk image for this configuration, only when I tried to write to it from Xubuntu it didn't save the changes (I couldn't see the changes in Windows 7 when I checked out that same partition). I investigated the problem and I found a solution on the internet: I needed to take the disk with the partition on it offline and then clear the "read only" attribute.The solution involved using the DiskPart utility to perform those steps. I tried to take the disk offline (with Administrator access), but DiskPart gave the following error: "Disk attributes may not be changed on the current system disk or BIOS disk 0." This is strange since that disk isn't actually a system partition: it boots from C: which is where Windows itself is installed.I ran Disk Manager, and it looked like this:So it appears a tiny 100MB partition has been added to my second disk, which is the disk containing E: which I want to be able to access from within the VirtualBox VM.So, I have the following questions: Is that 100MB partition the reason it won't work? If so, do I need this partition? If so, is there a way to move it to my first disk without breaking my Windows installation?
View 1 Replies View RelatedBy default, the folders in Windows 7 do not have a read-only attribute. Only files have a read-only attribute. Any changes to the folder's read-only box will only affect the files in the folder, then the read-only box will default back to blue when you check it again.
View 0 Replies View RelatedI have a problem with the C:Programs Files and C:Program Files (x86) folders under Windows 7 RC 64bit:
these folder have the read-only attribute set on and I can't unset it.
Whenever I tried to unset this attribuite even if Windows 7 seems to comply the folders actually remain in the read-only mode.
Is there a way to unset this attribute?
I need to do that at least for a subfolder, since this contains a program which modifies files every time you open it.
I was clicking around in my C drive because I was trying to find a folder that was hidden. I right clicked, click properties, selected the "hidden" folder attribute to the administrator folder, and clicked apply to all folders, subfolders, etc. I realized this was not the right thing because it just hid all the folders inside, so I undid it.Afterwards, it kicked me off of skype and when I tried to log on again, it said my disk was full when it is obviously not and gave me the "disk i/o error"In addition, I clicked firefox and it gave me a dialog box that said "Could not initialize the browser security component, etc etc and gave me another warning about my disk being full.What did I do? Obviously my disk is not full but these two programs think it is full and is giving me error messages.
View 9 Replies View RelatedI am unable to remove the cyberlink folder from the Program Files folder I am getting the following error message
View 5 Replies View Relatedmy friend tried to transfer some pictures into my laptop by blutooth he is using HTC sensation, but after the whole thing is done, there is a system folder left behind i tried to delete it but when i right click on it, a dialog box appears that the windows explorer stopped working, my computer just became very slow, like its running on 100 programs at a time, it took a very long time just to move the cursor to close the dialog box, yeah i cant delete the system folder i tried to google about this but i didnt found a similar problem with mine, tried to delete the registry method but it didnt work as a new folder appears instead, i dont want to do anything further relating to registry thing as i am afraid that i would corrupt some important files.
View 14 Replies View Relatedhoe to remove the folder AUTORUN.INF
View 2 Replies View RelatedI am trying to relocate my Users folder into another HDD to save space on my OS HDD by using this guide: Move the Users Directory in Windows 7 I am currently inside cmd on the Win7 Ultimate Edition(x64) DVD and have executed the following commands with some edited results next to them:
robocopy /copyall /mir /xj D:Users C:Users
"Directories skipped: 51 Files failed: 1"
(Cmd interpreted my C: drive to be the D: drive and my target HDD to be C: in recovery mode)
robocopy /copyall /mir /xj D:Users C:Users
"Directories skipped: 2114 Files failed: 1"
[code]....
I have windows seven home premium on a lenevo 3000 N100.I was running Super Anti spyware free edition and it said that a folder in my documents which contained 2 MP3 files and 2 image files was corrupt. I know it was not like that to begin with as I downloaded it on Jan 7 and have listened to the songs a few times since then. I can't delete it because it is corrupt. It recommends I run chkdsk. I go to it by going to my computer, drive c, properties, tools, check disk. Then it says it can't run it when windows is in use and asks if I'd like to schedule a scan the next time I turn on my computer. I have restarted and shut down my computer atleast 5 times now and it will not start that scan, it'll just boot up like it normally would.
View 9 Replies View RelatedI am trying to figure how to remove the lock icon over some of my folders. It appear if I share one of my folder with the Homegroup and unshare it later. I think it is because when I share it with my homegroup, the Everyone/Cooperation (I'm not sure to use the good word, I'm using the french version) option disapear and I can't add it anymore.By default :Once shared and unshared : (can't add Everyone - Cooperation, which cause I presume the lock on the folder)My only option is to share it again with the Homegroup or with Everyone with Read instead of Cooperation. I don't want this folder to be shared anymore.
View 9 Replies View RelatedHow to Remove a Included Folder from a Library in Windows 7 ?
View 0 Replies View RelatedI have Win7 Ultimate and in the windows explorer or what ever you call the program where you view the files and folders, it shows the address paths of "Hidden" folders that I want to keep hidden.How can I delete these address paths? It also shows up in the IE8 addresses which is a pain but easily deleted there. However in the Windows explorer address bar that option is not available.
View 9 Replies View RelatedHow to Add or Remove the Windows 7 Libraries Folder from the Navigation Pane ?
View 0 Replies View RelatedHow to Add or Remove your User Folder from the Windows 7 Navigation Pane ?
View 0 Replies View Relatedi think on a folder applay some permission by softwere. when is past some file it apeare one massage say access is deny i can't remove the permission from folder in security tab.
View 1 Replies View RelatedI have found a file named 'Card_content.xml' in my Nokia Memory Card (Fat Volume). When I try to open it with Notepad, it shows 'Access Denied'. I can not open, rename, copy, move, delete this file. I can see the content of this file using 'DiskInternals Linux Reader'. The Properties Dialog shows that this file has an attribute 'RHAX'. R - Read-only, H - Hidden, A - Archive, But what the 'X' denotes for. Please note that Properties Dialog does not have any column named 'Owner'. I am not able to change its attribute using CMD, CHMOD (coreutils) and other utilities. What the 'X' denotes for? How can I set or edit 'X' attribute of a file?
View 3 Replies View RelatedFor the past week or so, ALL of my files on desktop and in every folder have turned translucent. When I checked properties, the hidden attribute has been set. However this includes my special Libraries icons (Pictures, Music etc).Fair enough, I could simply go and manually unset the hidden property via DOS or Properties on the root C: folder, but this will be time consuming on a 640GB hard drive and it still won't answer why it happened in the first place.My first step was to perform an Antivirus scan which found nothing, then a malware scan which only picked up an infestation of 31 Relevant Knowledge files/registry entries. It tells me these are all now all removed but my icons are still "hidden".I have just done a test run to unset H on my C:usersusername folder (which required administrator privaleges to run) and it seems to have done the trick on folder and file icons, but my special Libraries icons are still translucent, and when I right click I don't get the usual properties dialog to unset the hidden attribute.After days of googling, I can't find anyone with a similar story for an explanation of why this may have happened, if it will happen again, if there are any other underlying issues/threats that are not obvious to me, or if I'm just being a numpty.In addition to this, around the same time but probably totally unrelated, my Chrome Shockwave Flash has crashed and have unsuccessfully uninstalled and reinstalled to no avail and I have now been forced to resort to using IE!
View 7 Replies View RelatedI recently tried to attach some photos to an email I was sending, only to discover that when I went through the browse option there was apparently nothing in the folder (which there was when I checked the folder in question)Having dug around I discovered that every folder appears to have read only set in attributes.I tried to remove this but all to no avail. Having clicked on apply, then closed the file down, I have reopened it to find read only is still there.
View 8 Replies View RelatedSeveral months ago I got a new laptop with Win 7 Pro SP1 64bit. I have done numerous backups on this machine but I've noticed that the file attribute 'archive bit' (a) is not being reset as it was on Win XP. (NOTE: backups were full backups not incremental or differential. Does Win 7 treat file attribute bits differently than XP? I also have noticed that 7 displays various attribute bits that were not used in XP; where is there a description of all attribute bits?
View 1 Replies View RelatedI work at a school as Computer Applications Technology teacher.The students bring homework to school on their flashdrives, and though we have good antivirus software at school, the viruses on their home PC's will often do considerable damage to the data on their flashdrives.One of the most common problems we have is some virus that sets the "system" attribute on all folders, effectively hiding them, and then creating shortcuts named after those folders, inviting people to double-click them, thereby effectively installing the virus locally (though our antivirus blocks it). So the problem is that those folders (with their homework) can only be revealed by going into "Folder Options" and selecting "Show hidden files and folders" and removing the option to "Hide protected operating system files". This is a big breach in security.So I usually have to change those settings, run the Attrib command in the command line to change all the folders, and then re-enable the settings.All of this takes up valuable time.What I would like to know is, is there a way to give the attrib command once, thereby changing the attributes on all folders on a specific flashdrive? I played around with the /S /D and *.* settings, but couldn't accomplish anything.
View 2 Replies View Relatedwindows is marking a data drive with a system attribute. Think it is happening in backup. I was hoping that someone would have an idea of what I was doing wrong. Or at least how to turnoff system attribute on the data drive so I could delete volume. I have reinstalled windows 7 (twice) and gotten the same results.
1) primary boot partition is 140 GB on C. Fresh install of Windows 7. I reformatted the install directory. No Windows.OLD directory after installation.
2) create a backup --> all user files and system image to DRIVE E (2TB)
3) after image is created --> Drive I (1 TB drive) is marked with a system attribute. Drive I has not been accessed at all and is clean.
4) Drive I is still empty. At no time was any data ever place on it. Also the partition on it was deleted and reformatted immediately before the reinstall of windows 7.
Future system images want to include DRIVE I
There are no files on DRIVE I -- unless Backup put them there. I have used GPARTED to delete the partition on I and reformat it, but same behavior reoccurs on backup.
I have windows 7N running on a normal motherboard (6 sata ports) no raid running. Motherboard is using standard intel ICHXR SATA RAID controller with most current drivers.
I am trying to modify the attributes of a file (in this case the album title for a group of MP3 files in 1 folder).All I want to do is change one character.W7 (home premium 32bit) blanks out the whole box, and I have to type the all of the text again.
View 1 Replies View RelatedI'm not able to rename folders. I go to properties and unchecked "Read only", but it does not change this attribute at all.
View 4 Replies View RelatedHow-to Add/Remove Game In Game Explorer Folder? [Need Effect In Start Menu...]
View 1 Replies View Relatedhow to remove "briefcase" and "Compressed (zipped) Folder" from the New context menu. I've been tweaking it by going to specific entries in the registry, but don't know where to locate ShellNew for briefcase and zip folder. I've come across some downloadable automated ways of getting rid of them, but I won't do that, I want to do it manually myself.
View 1 Replies View RelatedI am attempting to uninstall (and then reinstall) Office 2010 Prof Plus. I am not able to remove it from Add/Remove programs, have read through some help info and attempted to use the Windows Fixit, Revo & Ripoutoffice2007, none of which have removed it (Revo didn't take it out and then pulled up a million 'left over' files, none of which I deleted).
View 2 Replies View Relatedcan i remove my flash memory without removing safely remove
View 2 Replies View Related