I was clicking around in my C drive because I was trying to find a folder that was hidden. I right clicked, click properties, selected the "hidden" folder attribute to the administrator folder, and clicked apply to all folders, subfolders, etc. I realized this was not the right thing because it just hid all the folders inside, so I undid it.Afterwards, it kicked me off of skype and when I tried to log on again, it said my disk was full when it is obviously not and gave me the "disk i/o error"In addition, I clicked firefox and it gave me a dialog box that said "Could not initialize the browser security component, etc etc and gave me another warning about my disk being full.What did I do? Obviously my disk is not full but these two programs think it is full and is giving me error messages.
Earlier today I was trying to find some files in my Users folder which contained both the folders "Public" and "Home." I couldn't find the files I was looking for in either of those two folders. I right-clicked on the Home folder, and then clicked on Properties, thinking that the files I was looking for were hidden. I didn't realize that once I clicked on the "hidden" option that my home folder would be hidden; I brain farted and thought that function allowing me to view hidden files. I realized my mistake a few minutes later.
For the past week or so, ALL of my files on desktop and in every folder have turned translucent. When I checked properties, the hidden attribute has been set. However this includes my special Libraries icons (Pictures, Music etc).Fair enough, I could simply go and manually unset the hidden property via DOS or Properties on the root C: folder, but this will be time consuming on a 640GB hard drive and it still won't answer why it happened in the first place.My first step was to perform an Antivirus scan which found nothing, then a malware scan which only picked up an infestation of 31 Relevant Knowledge files/registry entries. It tells me these are all now all removed but my icons are still "hidden".I have just done a test run to unset H on my C:usersusername folder (which required administrator privaleges to run) and it seems to have done the trick on folder and file icons, but my special Libraries icons are still translucent, and when I right click I don't get the usual properties dialog to unset the hidden attribute.After days of googling, I can't find anyone with a similar story for an explanation of why this may have happened, if it will happen again, if there are any other underlying issues/threats that are not obvious to me, or if I'm just being a numpty.In addition to this, around the same time but probably totally unrelated, my Chrome Shockwave Flash has crashed and have unsuccessfully uninstalled and reinstalled to no avail and I have now been forced to resort to using IE!
For example I have a folder in my desktop with pictures, videos, documents, music, etc. I organized it by grouping by type, somewhere between large & extra large thumbnails, and a few other things. I want these settings applied to all other folders. I went to folder options and applied it to other folders. Nothing changed. My other folders, including my picture folder is still the same way it was. How do I apply to ALL folders? I know you can zoom in on thumbnails by hitting ctrl + mouse scroll wheel, but is there a way you can do it with a keyboard and not the mouse?
1) Enabled hidden administrator logon and logged onto it.
2) Edited user permission for entire drive and set to 'full control'
3) verified the folder is not locked/in-use even deleted it and then restored
Still has the stupid 'read only' box checked when you hit Properties. I am updating Starcraft 2 and get a file creation error during patching. The read only setting is the only thing I can think to change other than full uninstall -> reinstall.
edit: Just tried doing it in elevated command prompt and the R flag for readonly is not present at all even looking all sub-folders with the /S switch. So apparently its not read only but explorer is noting it so in 'properties' ... very strange.
By default, the folders in Windows 7 do not have a read-only attribute. Only files have a read-only attribute. Any changes to the folder's read-only box will only affect the files in the folder, then the read-only box will default back to blue when you check it again.
I've created a batch file containing the xcopy command to copy the entire partitioned drive to a folder on an external hard drive.However, when it is executed it works fine but the destination folder, called Backup, becomes a hidden system folder. Does any one know why this is the happening.I'm performing the xcopy on my parents computer, which is on Windows 7.
I don't have a clue how I'd search for the topic. I mistakenly moved my MS Office folder out of the start menu, all programs, and cannot figure out how to put it back in there. I looked around the computer but can't find a place to put it back
I have a good friends Dell computer running Windows 7 and 8G PNY flash drive. She accidentally deleted an entire folder from her flash drive that had her entire semester of MBA class work. Not realizing that she deleted the folder off her flash drive she emptied her trash bin on her computer. The Folder contained two other folders and inside one folder was all her word documents and powerpoint presentations and the other folder contained all her excel files and class assignments. I have tried running a recovery program (Search & Recover - Recovered Erased Files by iolo tech) on the flash drive and the hard drive but have not gotten any results.
i accidentaly shift deleted (thats permant delete fwiw) my photo folder (large folder tons of shots) - is there any way possible for me to recover it - desperation is setting in
I recently sent my laptop to HP for a fan repair and before I sent it off I accidentally deleted my Downloads folder and then cleared out my recycling bin.Well, I got my laptop back today and went to download a few files. After doing so, I realized that I can't find those downloaded files. I have no idea where those files went. They were .rar and ZIP files and I can't seem to locate them. Does anybody know how I can find those downloaded files (where they might have ended up with the Downloads folder gone) and how I can restore my Downloads folder
Windows 7 recently updated with about 17 additions.Is it policy to take a systems back-up (originally carried out after purchase on two DVD's)?If the answer is yes (which seems logical) can it be carried out on an external hard drive since the notices appear to only mention USBs or DVDs?
i heard that when you delete a file, it actually puts it into a hidden folder in the recycle bin. i enabled the visibility of hidden folders, but i did not see it there.where else could it be?
how to unhide a folder as i forget the name of folder i have used attrib command to hide the folder with full sceeen shot as i dont understand your previous explanation
I installed Tuneup utilities software yesterday, it asked me to Optimize my systemBut today as i checked for my hidden folder in windows Drive (c) ,it had disappearedNow as to how i can restore that folder as it contained important data including photos,files,videos
Yesterday I made one folder hidden in my F:/ drive. Today I want to un-hide it. I went to "Folder and Search Options" >> View Tab and then "Show hidden files and folders". Then I applied and OK the changes. Still I don't see my hidden file. The F:/ drive shows that I have 7GB of data in it. But it shows a folder of 98MB only.
I had a virus, which I deleted with Spybot S&D and Eset Nod32 antivirus (it may not have been removed completely). For now the infected PC is not connected to the internet.
I found the virus and started scan by looking into msconfig. I saw two objects:
The program files folder is hidden by the virus, you go to C: and it is not there. What can I do about it?? Its not hidden through the standard windows hidden files (I have showing of hidden files enabled, and I still cannot see it).
I tried combofix but it doesn't work for OS higher then XP, how can I restore my Program Files folder??
The Program Files is still there (programs that are installed there are working, and you can find things there through search in start menu, but you cannot see the folder itself).
Made a drive/folder hidden but cannot remember how to un-hide drive or folder. Can anyone shed some light on this problem I am having. Running homemade pc and windows 7 ultimate?
A folder has disappeared from an external hard drive, as confirmed by plugging it into another computer and checking, searching for several filenames it should contain on all possible drives (with hidden files shown), and searches with Recuva and testdisk of deleted files. There is no discrepancy between the size of the remaining folders and the reported size of the folder that contained it along with the remaining folders.
The drive in question is a 2TB WD Mybook external that may be showing its age- another folder had a cyclic redundancy check error, and the folder in question developed one several weeks later. I'm making plans to move my data off and have already duplicated the most important files on it.When the folder developed the CRC error mentioned in the previous paragraph, I ran scandisk. It was after running that utility that I found it had disappeared, so that is the most likely reason. However, the other folder remained (with error unfixed, eventually resolved by using testdisk to copy the folder to another drive.)
I was trying to display Hidden Folders/files to access an appdata folder under C:Usersusernameappdata. (it's to fix an issue with the game Dead Space 2) Anyway, I opened My Computer, then C drive, then Users. In here, I right clicked on empty space and opened properties. I checked 'Hidden' and apply. Said it needed administrator rights, I accepted. Then most desktop items disappeared, most files from my documents disappeared and after reboot, The ATI catalyst control centre is popping up an error message saying 'failed to start'.I realised I chose to hide all the files within that folder instead of showing hidden files/folders..I went to folder options and chose Show Hidden file and I can see them again but they have that see through look to them. ATI catalyst still won't start on reboot. I tried system restore to yesterday but still exact same.When I go to User Properties on the C drive again, it shows the files as Read Only and Hidden is unchecked.
I am having a major frustration with fonts on my laptop (Windows 7 Home Premium x64),amongst the other usual 64bit issues/compatibility It's new, and I was moving fonts to it from my old laptop (Windows 7 Home Premium x32).I had installed about 6500 fonts and it pretty much ground to a stop on start-up and launching programs causing even the most reliable programs to declare the "Not Responding" status (Even though i have i7/16GB Ram/64-bit)
I was checking Microsoft Office Word Starter 2010 and I realized that one of the files had hidden text in it. From Options - Display, I chose show hidden text and it was "Top of Form" at the top of the page. But I got curious about this and made some search and I realized that you can hide text in a txt file with a stream method and also there can be hidden streams in processes also.How can I find out if a doc(x) file has no streams in it. I mean the hidden text may be seen by the method of Options - Display; but can someone hide something with a password in a doc(x) file? If yes, how can I find this out?
Some of my important system files are no longer hidden and I can't hide them even with the Command Prompt "attrib" command. Files such as bootmgr and ntldr are shown and I can't hide them. Also, show Protected System files is unchecked and show hidden files is also unchecked so they shouldn't be showing. I tried to re-add their system file attribute but I keep getting an "Access Denied" error in CMD and I do not have user account control on and I'm on a Default Administrator Account.
Alright, this was my first time removing the current thermal paste and applying new one, the previous one was tough to remove because it was stone hard, although I didnt remove 100% of it i'd say I took out a good 70-80% of what was there.So when applying it, I hear some ppl say to put as much as the size of a bb just a small dot (this is for my laptop cpu and gpu) which I did, then evenly spread it around with the little spreader it came with. My cpu now gets hotter by 4-5c.
As a novice I went in on Windows 7 and applied the compatibility move to a program.It originally worked somewhat now it won't work at all. How can I "REVERT" the program to work as it did before applying the compatibility mode?
