I've exprienced random numerous shutdowns on this laptop over the past two days.I ran a check disk and it still randomly shuts off on me.I think my hdd may be failing me now after all these years.I have no backup solutions such as an external right now, so I really can't backup my hdd and replace it.
View 9 RepliesMy laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedWhen I started my toshiba laptop this morning, it started up normally, but then it shut down. When I tried to start it up, the screen was blank, but the power light was on. After about an hour, it just shut down. I tried to start it again, and it worked fine. I then ran a diagnostic test and it said "HARDDISK DRIVE TEST FAIL" What can I do to fix this?
View 1 Replies View RelatedI recently installed a game application which I believe may have contained viruses/malware.Later on I got a hard disk S.M.A.R.T. 301 error, and had to replace my disk... Just asking, but can applications cause the error I described above, and the hard drive to fail? Do they have anything to do with 301 error I got?
View 3 Replies View Related my friends laptop (which has different specs from that one, a 2,4ghz dual core, a 9M series GPU and 4gb RAM) started getting this SMART event ocurred thing like 3 years ago. So, being a dumba** back then, I thought formatting/reinstalling OS would solve the problem. So I did. Installed Windows 7 HP x86, used Driver Genius to install all drivers and SURPRISE the error was still there. So he kept the computer as it was, and surprisingly it survived all these years. Nothing happened really, he just used his laptop for his usual stuff with no problems whatsoever...weird.
But just recently he asked me to install Windows 7 HP x64, so he could use Sony Vegas Pro 12 (for some reason, Vegas 12 only exists for x64...and if there is a x86 I can't find it). So I did, and installed it...and then the problems started. The laptop is now crashing frequently, recovering from it in like 20 seconds every time. It works I guess, and you can copy around and mess with stuff on the computer, but after awhile it eventually crashes for 15-20 seconds. I have no idea why this is happening, and only then I thought of his SMART event error so I downloaded WD diagnostic tool, clicked the "view SMART data" button and everythin was right except for "re-allocated sector count" which was 117 at value, 117 at worst and 140 at threshold...could this last formatting fried his hard drive for good?
His warranty was gone even before he ever had the SMART event, he has the laptop for like 5 years now. Is it because of the x64 windows. Is there a logical reason for it not work properly on this laptop? Or was the excessive formatting that damaged the hard drive for good?
I have a Lenovo T500 laptop running Win 7 Pro x64. The hard drive started to fail (chkdsk showed bad sectors, S.M.A.R.T. test failed, etc.) so I got a replacement drive on warranty from Lenovo, put it in, reinstalled Win 7 and about 150 updates, restored my backed-up data, and reinstalled several applications.At some point in that tedious process, chkdsk started running on almost every reboot. I have run chkdsk /r both normally and from the Restore Environment.
View 1 Replies View RelatedI have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?
View 3 Replies View RelatedAlmost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
I contacted HP support which charged me $65 to tell me to purchase a $140 Hard Drive and $20 recovery disks. I have installed the hard drive and used the recovery disks now i get stuck at Starting Windows screen. I have let it sit for 1.5 hours just to see if it would eventually start and nothing.
The issue started with mouse touchpad stopped working and the light on the side of the laptop turned from white to a pinkish color. It is a HP Pavilion DV6 that this happened to with windows 7 64 bit.
Quote: The folks at DriveSavers, who deal with what the company's name implies, have come up with a truly helpful iPhone application. Not only does DriveSaver simulate real-life scenarios of hard drives failing as the user interacts with their inner-workings, but it also provides helpful advice on how to stay out of harm's way. Needless to point out, another huge plus is the price – completely free!
DriveSavers touts itself as the worldwide leader in data-recovery services. The company was recently pleased to introduce the first application developed by a professional data-recovery company for iPhone and iPod touch – DriveSaver. The app is described as a hard drive simulator that “educates” you about hard drives, the technologies surrounding them, the best ways to protect against crashing them, or to recover lost data.
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies View RelatedSince early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedMy secondary sata 1TB disappears after a long sleep mode. How can I fix this problem?
View 1 Replies View Relatedbasically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
View 1 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View Relatedmy computer does not starting up...so i choose to press f12 then diagnostics then it shows that no hardrive detected -warning.
View 1 Replies View RelatedI have a Sony Vaio VPCEA44FX (how stupid of me to buy a discontinued model >.<) and it won't start It get's to that Windows screen with the colorful flag thing, stays for 5-7 minutes, then bam...BSOD and then it tries to restart, but then before it gets to the Windows start up screen, it says "Operating System not found."I had a problem with this computer before, and I took it to the Sony place to fix it and it was fine. I remember some of the things the tech guy told me on the phone before I brought it in though.I tried to start in Safe Mode With Networking, but it won't work. The last file is starts was CLASSPNP and it just freezes there, it won't start at all.
I turned on my laptop and held F2. I tried to restore my laptop with factory settings, but that did absolutely nothing. Now I think I lost all my pictures and stuff now. When I restarted my computer I got an option 'Boot with Windows Repair' (I THINK that's what it said...I'll fix that later). I tried all those options (even opening the command prompt lol) and nothing. 'Startup Repair' failed. I went to the details and the most seemingly helpful line was on the bottom it said "Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding." Right now it's sitting in 'Advanced Boot Options' cause idk what to do now...
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedI'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
View 9 Replies View Related