I have a Lenovo T500 laptop running Win 7 Pro x64. The hard drive started to fail (chkdsk showed bad sectors, S.M.A.R.T. test failed, etc.) so I got a replacement drive on warranty from Lenovo, put it in, reinstalled Win 7 and about 150 updates, restored my backed-up data, and reinstalled several applications.At some point in that tedious process, chkdsk started running on almost every reboot. I have run chkdsk /r both normally and from the Restore Environment.
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
When I started my toshiba laptop this morning, it started up normally, but then it shut down. When I tried to start it up, the screen was blank, but the power light was on. After about an hour, it just shut down. I tried to start it again, and it worked fine. I then ran a diagnostic test and it said "HARDDISK DRIVE TEST FAIL" What can I do to fix this?
I've exprienced random numerous shutdowns on this laptop over the past two days.I ran a check disk and it still randomly shuts off on me.I think my hdd may be failing me now after all these years.I have no backup solutions such as an external right now, so I really can't backup my hdd and replace it.
basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
I recently installed a game application which I believe may have contained viruses/malware.Later on I got a hard disk S.M.A.R.T. 301 error, and had to replace my disk... Just asking, but can applications cause the error I described above, and the hard drive to fail? Do they have anything to do with 301 error I got?
my friends laptop (which has different specs from that one, a 2,4ghz dual core, a 9M series GPU and 4gb RAM) started getting this SMART event ocurred thing like 3 years ago. So, being a dumba** back then, I thought formatting/reinstalling OS would solve the problem. So I did. Installed Windows 7 HP x86, used Driver Genius to install all drivers and SURPRISE the error was still there. So he kept the computer as it was, and surprisingly it survived all these years. Nothing happened really, he just used his laptop for his usual stuff with no problems whatsoever...weird.
But just recently he asked me to install Windows 7 HP x64, so he could use Sony Vegas Pro 12 (for some reason, Vegas 12 only exists for x64...and if there is a x86 I can't find it). So I did, and installed it...and then the problems started. The laptop is now crashing frequently, recovering from it in like 20 seconds every time. It works I guess, and you can copy around and mess with stuff on the computer, but after awhile it eventually crashes for 15-20 seconds. I have no idea why this is happening, and only then I thought of his SMART event error so I downloaded WD diagnostic tool, clicked the "view SMART data" button and everythin was right except for "re-allocated sector count" which was 117 at value, 117 at worst and 140 at threshold...could this last formatting fried his hard drive for good?
His warranty was gone even before he ever had the SMART event, he has the laptop for like 5 years now. Is it because of the x64 windows. Is there a logical reason for it not work properly on this laptop? Or was the excessive formatting that damaged the hard drive for good?
I recently dropped my laptop and ever since i got errors and had problems booting my computer. So i reinstalled windows 7 and everything seems to work except I'm having trouble with the performance of my pc. It randomly runs really slow and every time i restart it the check disc starts to run and i have to bypass it. I already ran it a couple times and yet it still continues to run every time i reboot it. I was just wondering if there is any way to check if my processor/hard drive is working properly.
I have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?
Last night I noticed it had turned the bar to red, and said I had only 12 GB left of 135 GB. Im not into video, music, games or anything else I know of that would use that much space. I surf the web, and keep some scanned and some text documents. A few months ago I carefully installed Windows 7, instead of Vista which my PC came with. No problems. I just now deleted the old Windows stuff, and that freed up 47 GB, so thats good. I suspect that my hard drive was partitioned during that installation of Windows 7, and I dont know that that is necessary. Can that be undone?
I have an enclosure with my hard drive in it and connected it to the computer it was not found and i think its because its disabled i go to computer manage disk managemtent and recovery disk,i click properties click on my hard drive (toshiba...) click enable, then i click next and it says windows was not able to enable the hard drive
I cant access my hard disk drive, when im trying to open it, my laptop responses that that there is no permission from administrator, there is a logo on my hard disk drive that the hard disk is shared..
I am running windows 7 64 bit, on an eMachines lap top, I have purchased an external HDD and now I am trying to create a perfect copy of my system. I used DriveImage XML but it failed. I have used this program in the past with great success on a different computer running WindowsXP.The failure I get is "failed to lock drive". I've tried skipping the lock drive option and going straight to shadow copy; same problem.I can only assume the failure to lock drive is based on permissions and files being in use. So I think I need to attempt this without loading windows. Is there anyway of running a "free" drive cloning program from a DVD or USB Flash drive without booting into Windows?I would just bit torrent a win7 OS, install it on my external, and run the program from their, but I don't want to have to resort to law breaking, and I have never run linux.
Also I tried using a "backup" feature on Paragon Partition Manager, it did "backup" the system, but it didn't clone the drive. All the backup files are written in directories such as "C:/archive/" and thus I assume there is no way of booting into a system written that way. I assume it's like windows system restore, and what I need is a bootable image of my primary drive.Oh and I should clarify, that it's not my external drive that fails to lock; the external HDD has been formatted, partitioned, and can read and write data just fine, and has way more than enough room to copy the HDD in my lap top.Also, the HDD on my lap top has 1 primary partition, with two logical partitions. I have no idea what the logical partitions are for and if that could be causing the problem.
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
i bought a samsung 1000 gb hdd. model:HD103SJ (1000GB/7200rpm/32M) it was my primary hdd. when i bought it, had 938GB total space.I formatted n partitioned it couple times... last time when i broke all partition then it showed total 931.
This is kinda long and I've fixed it, but could use your input. So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either. My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things; after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.
My friend's laptop (Acer Aspire One 722 - Windows 7 x64) has been shut down after opening an email and Windows never started up again. When you attempt to start up the windows, it stays the black screen and says "No bootable Device Found"! I inserted Windows Live Disk and loaded it (Windows XP Mini - Golden Edition). When I went to "My Computer", it did not show any local drive. I went to "Disk Management" and in there, there was also no unallocated or allocated space. I even removed the HDD and plugged it back in. No thing happened. Then I removed the RAM card and inserted it back. Again, nothing happened! By the way, HDD had movements when laptop was on (I had removed the beneath panel).I inserted Windows 7 Disk to install a fresh Windows 7. But when you get to the part where it asks you to choose the partition to install the operating Sustem, it shows one unallocated drive with 0 (Zero) capacity! The options to Delete and format are disable. Only the option "New" is active and it gives you (0) bite to partition!
I currently have Win 7 Home 32 bit installed. I will be upgrading my system and using a new Sata hard drive.I would like to install my Win 7 retail upgrade disk [ the 64 bit version ] on the new drive.Can I do this? If so what would be the easiest way to retain all information from my current 32 bit drive?
I recently purchased a WD Scorpio Black 320GB 2.5" HDD for my Gateway MX6920 notebook. I wanted to upgrade to this larger, faster HDD and replaced it into my notebook and attempted to install Windows 7. During setup it stopped and gave the error 0xc00000e9 for "unplugging a removable storage device such as an external USB drive ......".
I tried installing Windows XP and it gets to a blue screen to choose a Repair of Windows or a fresh install. Choosing either one returns a blue screen that says system can not find a Hard disk connected.
I put this drive into an enclosure and formatted it in another computer. Also it is recognized in BIOS. I'm running BIOS version 77.08 if relevant.
to create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.