Run A Check On Processor/hard Drive Etc?
Apr 7, 2012
I recently dropped my laptop and ever since i got errors and had problems booting my computer. So i reinstalled windows 7 and everything seems to work except I'm having trouble with the performance of my pc. It randomly runs really slow and every time i restart it the check disc starts to run and i have to bypass it. I already ran it a couple times and yet it still continues to run every time i reboot it. I was just wondering if there is any way to check if my processor/hard drive is working properly.
View 3 Replies
ADVERTISEMENT
Jul 13, 2012
I have a Lenovo T500 laptop running Win 7 Pro x64. The hard drive started to fail (chkdsk showed bad sectors, S.M.A.R.T. test failed, etc.) so I got a replacement drive on warranty from Lenovo, put it in, reinstalled Win 7 and about 150 updates, restored my backed-up data, and reinstalled several applications.At some point in that tedious process, chkdsk started running on almost every reboot. I have run chkdsk /r both normally and from the Restore Environment.
View 1 Replies
View Related
Nov 22, 2012
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies
View Related
Feb 4, 2013
I have an WD external hard disc,its showing data error (cyclic redundancy check) and its also showing to format the disc.
View 4 Replies
View Related
Jul 31, 2012
This morning my pc started acting up for some unknown reason. After numberous attempts to fix it, I decided to restore from a restore point. It said it did restore but things got even worse.I then decided to restore an Maxium Reflect image I had made a couple weeks ago. When I made the image, the pc was working fine. The restoring of the image went normally.I have two strange things occurring.
1. I have two hard drives with 3 partitions on each drive. After about 10 minutes I can NOT see second hard drive in either windows explorer or Disk Managaer.
2. When the pc is first booted and a few minutes pass, I get what sounds like a radio station playing. It only lasts for about 20-30 seconds then goes off. It comes back randoms times. I have checked the processes that are running and nothing stands out that would cause this.I built this PC in 2009 and the combination of these identical hard drives (1 TB Sata) have always acted strange at times. Example the second hard drive would NOT always boot when windows booted. This was usually fixed by just rebooting.I have checked and all fans are working normally and inside the case is relatively clean.Is there any software that can be used to check hard drives???
View 4 Replies
View Related
Sep 25, 2012
I am facing blue screen of death for the past 1 year. I have changed the hard disk, motherbord as well as processor still I face the same problem.
My system is Dell n5010
Processor Intel Core i3
300gb HDD
4gb RAM
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Jul 11, 2011
I have a Hitachi HTS545050B9A300 500gb HDD and was wondering If I am able to use the Hitachi Drive Fitness Test software with my x64 processor? I know that it says it is only compatible with an x86 architecture,but what are my alternatives besides a CHKDSK?
View 1 Replies
View Related
May 16, 2012
my laptop has a problem staying on, it doesn't get hot at all, i turn it on , it takes alot longer to boot up, then after about 10-15 min it randomly turns off, no shut down screen, just a complete turn off.there's times where it wont get past the windows loading screen.
View 3 Replies
View Related
Nov 26, 2012
A couple months back, had issues with windows attributed to virus. I formatted C drive and did a clean install. Last week, windows was having issues with win explorer stopping , random crashes etc so i did another clean install Friday.Since then, I have had a few blue screens of death flash then the PC goes off.Is it possible there is something wrong with my hardware vs win 7? is there software that will check my C: drive (an SDD Drive) and memory for issues?
View 9 Replies
View Related
May 26, 2012
I have a new external drive for backup, but can't find out what I have stored on it. How do I find that out?
View 3 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Sep 7, 2012
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
View 4 Replies
View Related
Sep 23, 2010
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies
View Related
Dec 13, 2011
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies
View Related
Jan 15, 2013
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
View 2 Replies
View Related
Nov 13, 2012
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies
View Related
Oct 18, 2012
Almost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
View 6 Replies
View Related
May 9, 2012
Auto check comes up 4 times right after windows7 starts up. But will continue to boot normally. BEreg Query comes up with this.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
BootExecute REG_MULTI_SZ autocheck "autocheck ""autocheck autochk *"""\0autocheck "autocheck ""autocheck auto_reactivate \\?\Volume{a80f420c-d16d-11de-a2bb-806e6f6e6963}\bootwiz\asrm.bin"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck auto_reactivate \\?\Volume{a80f420c-d16d-11de-a2bb-806e6f6e6963}\bootwiz\asrm.bin"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck
[code]....
Have 1 SSD drive for OS /C No partions and one HDD/D with 2 partions with acronis backup on one the other is clean.
View 3 Replies
View Related
Sep 8, 2012
I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
View 9 Replies
View Related
Mar 14, 2011
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
View 2 Replies
View Related
Jun 12, 2012
Is it possible and feasible to change the hard drive to a solid state drive on a Toshiba Satellite Pro L300-1FK laptop.
View 5 Replies
View Related
Oct 8, 2010
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
View 9 Replies
View Related
