So earlier today i started the installation to Windows 7 Ultimate and when i got to the part where you select a given drive on which to install the system it doesn't show up! And then afterwards i actually had to open up my computer and re-attach the cable for my hdd to get it to even show up again in BIOS.
View 1 RepliesI have an IDE hard drive as my secondary drive used for backups or misc files. I also have an external. But for some reaosn on Windows 7 x64 the IDE (labelled as D randomly vanishes. BIOS sees it fine allt he time. Any ideas or suggestions aside from replacing it as it is still good.
View 5 Replies View RelatedI have two optical drives on it one internal and one USB external.For some reason the external drive sometimes disappears from the computer. I can't find it anywhere then a few days later it pops back up. I have tried replacing the cables and checked to power and still the problem continues. I also tried reinstalled the system and sometimes it works.
View 2 Replies View RelatedI have a 2nd hard drive and somewhat frequently it disappears from Windows explorer like it doesn't even exist. Then once I reboot the disk is back and perfectly fine and intact.I ran the Seagate tools against it and both the short test and long test passed just fine and it says that SMART has NOT been tripped.I did a lot of googling and found similar reports from others. But the things they suggest do not apply. For instance some reports are related to the driver disappearing after waking from sleep. In my case I can be actively using the drive and then it disappears. Also someone suggested disabling power management on the drive, but when I checked the drive is already set to Never power down.I am thinking that perhaps the SATA cable is buggy or not connected solidly. I'm going to open it up and try changing the cable. I really do think the drive is perfectly fine.
View 9 Replies View Relatedmy external hard disk is disappears.what should i do?
View 1 Replies View Relatedmy dvd / blueray writers disappear from my system after the computer has been on for a while or i startup and try to burn a dvd/blueray...now here is a hint i recently removed the dvd and installed a Hot Swap drivebay..that hard drive dissappears when when the blue ray dissappears... thaey ar on the same sata chipset the mobo has 6 ea 6gb/s sata connectors and 2 3gb/s sata connectors..the blue ray and the hotswap bay are on the 3gb/s chipset...the mobo has the latest bios and it makes no differance what bios version is installed and when i reboot the computer they are back...
here are the stats:
mobo-gigabyte 990fxa-ud7 am3+
16 gb ddr3 1600 mem
amd fx-8150 8 core cpu
ati 6950 video card 2 gb
1200 watt p/s
7 2tb hdd
Brand New Hard Drive Disappears from Windows after sleep; WD Raptor only 450GB, disappears from Windows 7 after system resumes from sleep. The drive is just a storage drive. I've got three other hard drives that work fine. Could this be a port issue on the motherboard, Asus P8P67 LE?
View 2 Replies View RelatedMy D 200gb SATA hard drive disappears around 1-90 mins while on windows 7. I have tried registry repairs and alot of things. Its not faulty cables because i used to have win Xp on exact same computer but reformatted to windows 7. Rebooting makes the hard drive reappear but it still disappears after a while. It still shows up in the bios though. When it disappears, it is completely gone, even in device manager.
my important data is on my 200gb D drive and i only use C for my os and some other things like Firefox because its only 80gb
after searching for some answers on the forums, i've been moved to post a separate thread. i have an external hard drive that disappears for some seconds only to reappear again on my list of drives. my computer alerts as if the external drive were dismounting then remounting. i have run various checks and nothing is presenting as abnormal or of issue. has anybody else experience this, what effect is it having on my computer and what can be done about it
View 3 Replies View Relatedok so if i go into my computer and click on my c drive then highlight everything in there it says that i have 56gb space taken up but when i click on the hard drive itself and go to properties it says 66 gb is taken up. i have hidden files shown so i dont know where this 10 gb has gone. this happed after i turned on restore points and gave it 10 gbs but i deleted that in the screen and turned it off at the same time and it is still gone?
View 5 Replies View Related2 weeks ago i replaced XP with Windows 7 Pro 64 bit on my PC and since then my D: drive randomly disappears. I have been using the PC which has 3 internal disk drives with XP for the past 3 years never having problems with the disk drivesSince i installed Windows 7 Professional 64 bit, the D Drive is dropped from time to timehen i look under device manager the disk is completely gone, and also if i go to command, diskpart, list disks .... it does not show up.
View 7 Replies View RelatedI recently bought an Asus U50F notebook. Pretty good so far. But for the past few days, the DVD/CD-ROM E: drive disappears from My Computer. I go to Device Manager and it shows as disabled (Code 22). I proceed to enable it, and it then shows under My Computer again (and works well). But a little while later, it happens again, and I must return to Device Mgr to enable it. This is a continuous issue. I get no help from googling. The drive is a Matshita DVD-RAM UJ892AS. I have Win7 Home Premium.
View 9 Replies View RelatedI have a Sony VAIO laptop running Windows 7 Home Premium 64-bit with a single 500 GB hard drive. A year ago, when the computer was new, I used a free partition manager program (Partition Wizard maybe?) to allocate about 60 GB for drive C: which holds Windows 7 and all of my software apps. I allocated the rest of the free space to D: for all of my data files. Sony also has a 13GB recovery partition and a 100 MB System Reserved partition which preceed C: and D: on the hard drive.
Three days ago, when I booted the computer for the day, drive D: was gone. Disk Management showed free, unallocated space equal to the size of my missing drive D:. Using Sony live chat support, the technician used Disk Management to allocate the 400 GB of free space to D: and formatted the partition. I then restored my missing data from a backup.The next day I booted my computer and drive D: was gone again. Disk Management again shows free, unallocated space equal to the size of my missing drive D:.
I have no third-party disk management software installed. Recent changes to my system include:
1) SmartSync Software recently downloaded a new version of SmartSync Pro (version 4.0) to my hard drive.
2) I ran Disk Cleanup on drive C:
Whether it's watching a movie or playing a game, it often stops and I can't see my drive in the system. After I restart the computer, it's back.
I don't know if it has anything to do with it, but it first happened while I was playing TES III: Morrowind (vanilla), when it tried to load a cutscene. I heard that earlier versions have some Safedisc protection which can mess with your system (it was 1.2 btw). I don't use that anymore, now I have Steam GOTY version, but it happens anytime
MY DRIVE DATA DISSEAPPEAR AFTER INSTALLING XP:-
today i install windows XP- install audio driver then i open my G DRIVE (my songs drive) to check audio. it was empty then i check its properies it shows.
USED 11 GB
FREE 20 GB
as usual but it was empty
then i check disk G DRIVE for errors & then reinstall xp on formating C drive
after setup windows second time i open G DRIVE. it was still empty but when i see its properties it says:-
USED 0 BYTE
FREE 0 BYTE
CAPACITY 0 BYTE
PLZ HELP ME TO RECOVER MY DATA.
I AM ATTATCHING ITS PROPERTIES.
I just installed Norton 360 trial and setup a backup on my second partion(D)
of my WD 640 GB.
But when i access the Norton Backup Drive through My computer the window disappears and the drive vanishes!
So am i doing something wrong or should i try Norton Internet Security?
Why do area51reopened close "[Solved] Optical drive disappears in windows 7" it was never solved. Shall this remain a mystery to us all?
View 2 Replies View RelatedThis was a weird one. I did a clean install of RC1. I used my Dell driver CD to reinstall drivers. After installing the sound, chipset, and SATA drivers the DVD drive would disappear at the end of each installation. I rebooted and BIOS did not detect it. I had to power off at the end of each installation to get the drive back.
I've copied the entire contents of the drive to the hard drive and had no problems. I installed one of the drivers from this copy on the hard drive and had no problems. This is all now working so I probably won't play too much with it but I wanted to put it out there for others to consider.
Drive identified as: TSSTcorp_DVD+-RW_TS-L633B
Also lists D200. I'm wondering if this is the firmware version.
Dell Latitide E5400
My computer is running Windows 7 professional. It is a fresh install. I have a blu ray drive installed (LG BH12ls38) that works fine. However, when I put my computer to sleep and wake it back up, the drive is gone. When I go to device manager and try to scan for hardware changes it still doesn't recognize it. The only way to solve the problem is to shut down the computer. Restarting the computer doesn't work. If I restart, the computer stays on the motherboards screen for a longer period of time then it normally does (about 30 seconds). Also, it seems that this drive is affecting the computer when I shut it down. After having this problem of not being able to find the drive it seems my computer takes longer to shut down.
I have installed all necessary updates for Windows and the driver is provided by Microsoft driver version - 6.1.7601.17514 and date is 6/21/2006. I called LG and they have not been able to find a solution. It seems they do not provide/have a driver and rely on microsoft's drivers. I also updated my BIOS to the newest version. I went to my local store and tried another LG drive which was older and not blu ray and it worked fine so it's not a motherboard or power issue. My computer is running in IDE mode. The reason I state that is because I saw some posts about people switching from IDE to AHCI mode. However, I talked to the technician at my local microcenter and he said this wouldn't be the issue. Sounds to me like firmware issue?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View Related