today i install windows XP- install audio driver then i open my G DRIVE (my songs drive) to check audio. it was empty then i check its properies it shows.
USED 11 GB
FREE 20 GB
as usual but it was empty
then i check disk G DRIVE for errors & then reinstall xp on formating C drive
after setup windows second time i open G DRIVE. it was still empty but when i see its properties it says:-
This was a weird one. I did a clean install of RC1. I used my Dell driver CD to reinstall drivers. After installing the sound, chipset, and SATA drivers the DVD drive would disappear at the end of each installation. I rebooted and BIOS did not detect it. I had to power off at the end of each installation to get the drive back.
I've copied the entire contents of the drive to the hard drive and had no problems. I installed one of the drivers from this copy on the hard drive and had no problems. This is all now working so I probably won't play too much with it but I wanted to put it out there for others to consider.
Drive identified as: TSSTcorp_DVD+-RW_TS-L633B
Also lists D200. I'm wondering if this is the firmware version.
When the final version of Windows 7 is released I am going to install the Windows 7 operating system to my C drive and put my data on a separate physical D drive. I am going to put the temporary Internet files and the Windows temporary files folders on that D drive. What user folders would anyone suggests go to the D drive and what other data and/or folders would anyone suggest to go on the D drive?
I recently bought an Asus U50F notebook. Pretty good so far. But for the past few days, the DVD/CD-ROM E: drive disappears from My Computer. I go to Device Manager and it shows as disabled (Code 22). I proceed to enable it, and it then shows under My Computer again (and works well). But a little while later, it happens again, and I must return to Device Mgr to enable it. This is a continuous issue. I get no help from googling. The drive is a Matshita DVD-RAM UJ892AS. I have Win7 Home Premium.
I have a Sony VAIO laptop running Windows 7 Home Premium 64-bit with a single 500 GB hard drive. A year ago, when the computer was new, I used a free partition manager program (Partition Wizard maybe?) to allocate about 60 GB for drive C: which holds Windows 7 and all of my software apps. I allocated the rest of the free space to D: for all of my data files. Sony also has a 13GB recovery partition and a 100 MB System Reserved partition which preceed C: and D: on the hard drive.
Three days ago, when I booted the computer for the day, drive D: was gone. Disk Management showed free, unallocated space equal to the size of my missing drive D:. Using Sony live chat support, the technician used Disk Management to allocate the 400 GB of free space to D: and formatted the partition. I then restored my missing data from a backup.The next day I booted my computer and drive D: was gone again. Disk Management again shows free, unallocated space equal to the size of my missing drive D:.
I have no third-party disk management software installed. Recent changes to my system include:
1) SmartSync Software recently downloaded a new version of SmartSync Pro (version 4.0) to my hard drive.
I have an IDE hard drive as my secondary drive used for backups or misc files. I also have an external. But for some reaosn on Windows 7 x64 the IDE (labelled as D randomly vanishes. BIOS sees it fine allt he time. Any ideas or suggestions aside from replacing it as it is still good.
I have two optical drives on it one internal and one USB external.For some reason the external drive sometimes disappears from the computer. I can't find it anywhere then a few days later it pops back up. I have tried replacing the cables and checked to power and still the problem continues. I also tried reinstalled the system and sometimes it works.
Whether it's watching a movie or playing a game, it often stops and I can't see my drive in the system. After I restart the computer, it's back.
I don't know if it has anything to do with it, but it first happened while I was playing TES III: Morrowind (vanilla), when it tried to load a cutscene. I heard that earlier versions have some Safedisc protection which can mess with your system (it was 1.2 btw). I don't use that anymore, now I have Steam GOTY version, but it happens anytime
I have a 2nd hard drive and somewhat frequently it disappears from Windows explorer like it doesn't even exist. Then once I reboot the disk is back and perfectly fine and intact.I ran the Seagate tools against it and both the short test and long test passed just fine and it says that SMART has NOT been tripped.I did a lot of googling and found similar reports from others. But the things they suggest do not apply. For instance some reports are related to the driver disappearing after waking from sleep. In my case I can be actively using the drive and then it disappears. Also someone suggested disabling power management on the drive, but when I checked the drive is already set to Never power down.I am thinking that perhaps the SATA cable is buggy or not connected solidly. I'm going to open it up and try changing the cable. I really do think the drive is perfectly fine.
So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
My computer is running Windows 7 professional. It is a fresh install. I have a blu ray drive installed (LG BH12ls38) that works fine. However, when I put my computer to sleep and wake it back up, the drive is gone. When I go to device manager and try to scan for hardware changes it still doesn't recognize it. The only way to solve the problem is to shut down the computer. Restarting the computer doesn't work. If I restart, the computer stays on the motherboards screen for a longer period of time then it normally does (about 30 seconds). Also, it seems that this drive is affecting the computer when I shut it down. After having this problem of not being able to find the drive it seems my computer takes longer to shut down.
I have installed all necessary updates for Windows and the driver is provided by Microsoft driver version - 6.1.7601.17514 and date is 6/21/2006. I called LG and they have not been able to find a solution. It seems they do not provide/have a driver and rely on microsoft's drivers. I also updated my BIOS to the newest version. I went to my local store and tried another LG drive which was older and not blu ray and it worked fine so it's not a motherboard or power issue. My computer is running in IDE mode. The reason I state that is because I saw some posts about people switching from IDE to AHCI mode. However, I talked to the technician at my local microcenter and he said this wouldn't be the issue. Sounds to me like firmware issue?
my dvd / blueray writers disappear from my system after the computer has been on for a while or i startup and try to burn a dvd/blueray...now here is a hint i recently removed the dvd and installed a Hot Swap drivebay..that hard drive dissappears when when the blue ray dissappears... thaey ar on the same sata chipset the mobo has 6 ea 6gb/s sata connectors and 2 3gb/s sata connectors..the blue ray and the hotswap bay are on the 3gb/s chipset...the mobo has the latest bios and it makes no differance what bios version is installed and when i reboot the computer they are back...
here are the stats:
mobo-gigabyte 990fxa-ud7 am3+ 16 gb ddr3 1600 mem amd fx-8150 8 core cpu ati 6950 video card 2 gb 1200 watt p/s 7 2tb hdd
Brand New Hard Drive Disappears from Windows after sleep; WD Raptor only 450GB, disappears from Windows 7 after system resumes from sleep. The drive is just a storage drive. I've got three other hard drives that work fine. Could this be a port issue on the motherboard, Asus P8P67 LE?
My D 200gb SATA hard drive disappears around 1-90 mins while on windows 7. I have tried registry repairs and alot of things. Its not faulty cables because i used to have win Xp on exact same computer but reformatted to windows 7. Rebooting makes the hard drive reappear but it still disappears after a while. It still shows up in the bios though. When it disappears, it is completely gone, even in device manager.
my important data is on my 200gb D drive and i only use C for my os and some other things like Firefox because its only 80gb
after searching for some answers on the forums, i've been moved to post a separate thread. i have an external hard drive that disappears for some seconds only to reappear again on my list of drives. my computer alerts as if the external drive were dismounting then remounting. i have run various checks and nothing is presenting as abnormal or of issue. has anybody else experience this, what effect is it having on my computer and what can be done about it
forum i have a question. I have a kingston 30 gb ssd i use as my windows drive, and a 750 gb wd hdd for data/game storage. I have heard that you can ghost a file on the data drive into the x86 folder so that all new installs go there and then you still recieve most of the benefits of your ssd w/o clogging it up. I have an amd based system (dont know if that matters or not)
As SSDs are undoubtedly the way to go for the OS and booting, I am curious how one can configure Windows 7 to install on C: yet save all user data on D: (which is where the 2TB drive is). The main reason being the space is limited on C (SSD is only 90GB) and the media structure of the user library with videos, documents, etc can easily span hundreds of gigs.Is the only way to do this to manually change the user location to D:? If so, how is this done?I'll be building a number of systems soon and want to have some sort of C: boot D: user data standard which falls within the management of the traditional Windows 7 Library structure.
i have win 7 loaded on USB drive when i click on repair win 7. it says there is some problem and there is a window to send the info to microsoft thats it i don wanna do a fresh install of win 7 because i have some data to save..
I've got my 500gb laptop hdd partitioned with majority on d data partition (have not installed anything ever to d - only c). I do have my user folders relocated to the d part. Where should I install or set up game directory for my d partition? (Current game I'm installing is recommending c/prog files(x86)/published/game title) should I just change c: to d: even though those folders don't exist, installation will create them? Are steam games installed to different path normally than x/program files. How might future steam game installs affect where/what directory folders? Any program for remapping or whatever would be needed to use an xbox 360 controller for pc games?
I have been suggested to keep my data in a separate drive than my operating system.
Actually, my hard drive is partitioned in two drives, c: and F:
I want to transfers my directory c:user to f:user. I did try to copy between them, but some files where not transferred
So what is the best way to do that. After, do I need to do special thing to make sure that all the references will be followed to the new files positions, IE when accessing them via my task manager
