GIF Files Not Working On Windows 7
Jun 5, 2011None of my GIF files will animate in Windows 7. They used to open in documents and anything.now nothing
View 2 Replies
ADVERTISEMENT
Certian Wav Files Not Working For Windows 7
Sep 1, 2011I am trying to use a certain wav file for my windows log off in windows 7 ultimate x64. The file is only about 7k and only about 0.5 second long. I have smaller shorter wavs that work, and larger longer wavs that also work. I know the sound file works, as I can open it in any media app and listen to it. For whatever reason I can not use it for any windows sounds. As far as I can tell it meets all the guidelines for use as a system sound.
View 12 Replies View RelatedSelecting Multiple Files In Windows 7 - Not Working In Certain Programs
Jun 18, 2012In Windows 7 I have no problem selecting multiple files in a normal folder for example. The problem is when using a program (such as Freestar AMR MP3 Converter) I cannot select multiple files at once. This can make using the program extremely tedious and time-consuming if there are large numbers of files to convert. It is not just this one program that does it, because other programs also fail to allow me to select multiple files. Again, I must state that this only seems to happen when using certain programs and not generally in Windows 7. Also, a small unrelated question: how do I get out of 'Libraries' view in My Documents and basically disable the Libraries view permanently, and just have it normal like in all earlier versions of Windows?
View 2 Replies View RelatedWindows Explorer Stops Working - Recovery From Backup Files?
May 1, 2011Every time I open a program it comes up windows explorer stop working. And how do I make a recovery from my back up files. System restore does not go back as far as three months, why?
View 5 Replies View RelatedBIOS Not Working - Windows Cannot Install Required Files (Error Code 0x80070017)
Dec 24, 2011I have Dell Inspiron N5010. I was using windows 7 home basic 32 bit os. I wanted to change it to windows 7 ultimate. So I have inserted windows 7 Installation disk into CD drive. Then I went to through the installation and I chose the Custom as the installation type.When the partition page appeared, I have formatted all the disks including C which contains windows files. Then I got 298 GB unallocated space. Then I split them in to 4 partitions. Then I have selected one partition to install the windows. Then installation started .
Copying windows files succeeded. Expanding Windows files(0%) is still be like that for 20 minutes. Then I got the error message like: "Windows cannot install required files. Error code 0x80070017". And I thought it would be the installation disk problem. But it works fine in other systems. I tried several disks. No use. Also I got another problem. When system boots I tried to enter into BIOS using F2 and F12 which was mentioned in screen. But it did not enter into the BIOS, Instead it goes to the installation.
.exe Files Not Working?
Jun 2, 2011i'm having a problem with my .exe files. if i click on .exe file, it doesn't work and hangs the computer or the software but works fine only in safe mode. whenever, i try to open skype, it never works.sometimes, when i use Internet video, it hangs the browser and then needs to be closed down from task manager.
View 1 Replies View RelatedFiles On HDD Without Laptop Working?
Jan 15, 2011My laptop has crashed on me and won't turn on. I desperately need a video from the Hard drive to upload tonight.. is there any way i can get the video from it ?
View 5 Replies View RelatedRecovered Files From Norton 360 Not Working
Feb 6, 2012Alright, so this is kind of complicated. I really hope someone can help me. This weekend, I was unable to login to Windows. When it got to the login page, I got no response from my keyboard or mouse. I tried 3 system restore points, none of which worked, so I had to go with a full system recovery which returned my computer to factory settings. I use Norton 360 so I had all of my files backed up to their online storage. When I went through the computer set-up, it set up a profile for me under the name jmdunn2. When I recovered my files from Norton, it said that it restored them to the original location, but that location was now under the C:/Users/owner tab. I want to just be able to move these files into the C:/Users/jmdunn2 tab, but when I right-click, I am not given the "Move to" or "Copy to" options. It seems like they're all locked into place somehow.
View 2 Replies View RelatedOnly Some MKV Files Working On Xbox As Extender
Sep 26, 2011I have searched and trauled the web and this website for answers and this site seems to have some pretty good responses so i thought i would post here. (I have also made a post on Shark007 fourms)
I run windows 7 ultimate 64bit on Intel quad core, 2gb ram with nvidia geforce 9600gt. Starting out with no idea what to do, after a some fiddling and searching i have now got both shark's codecs installed (normal and x64bit) and can run some MKVs through Windows media center using my 360 as an extender.
However, on about half of my MKV files i get the error message:
"The file type is not recognized and cannot be played. Either the correct coded is not installed or the file is corrupt" when trying to play on the xbox360. These same files play fine on Windows Media Center and Windows Media Player on the PC however.
I have tried various settings and also divx and CCCP codecs packs with the same result, (although i had to change some stuff in regedit to get MKV to show up on the xbox using divx) If you need any more information feel free to ask. Edit: I have noticed using sharks analyze function that the MKV which play are: "Format settings, ReFrames : 4 frames" and the ones which do not work are "Format settings, ReFrames : 5 frames"
.TIFF Files With Program Not Working
Dec 20, 2012I've been trying to associate .TIFF files with a program called PaperPort Image Viewer on one of my company's engineering computers. When I try to use the "Open With" function or the associate file type in Default Programs, the program does not populate in the window. I go and search for the executable for the program, select it and try to bring it into the window for acceptabel programs for the file extension, and it doesn't populate to the window. However, if I map a drive to the users computer, and try and associate the same file type with that same program from my machine, it populates into the window with no problems, once I find it in the file structure. Both machines are running Windows 7 Professional 64 bit. The engineering one is a Dell Precision 6700 and my machine is a Dell Latitude E4310 laptop.
View 1 Replies View RelatedAudio Not Working Cant Play Files
Sep 11, 2012resently, when i was trying to get Itunes to work(never mind about itunes, not the problem) i dud deeper into the problem and i gone through some regedit stuff at the RUN wich i was told to do if Itunes was gonna work and then my audio stopped working, my media files to but i can still play games (without audio). dont really know what to do?
View 1 Replies View RelatedWorking With Multiple Files And Folders
Apr 1, 2010In this tutorial, we'll show you how you can work with multiple files and folders at once. As you become more proficient using your PC, you may start to create and download a large number of files. When dealing with large collections of files, being able to work efficiently with multiple files and folders can be a huge time saver.
View 0 Replies View RelatedCorrupt System Files And Programs Not Working
Dec 26, 2012I am having some issues with some programs not working on my computer. I tried uninstalling them and reinstalling but they just fail on load.
I opened up command prompt and ran SFC/ SCANNOW and received a message about corrupt files.
WD2500 Caviar SE Not Working Files Are Trapped
Jun 6, 2012I recently changed the graphics card in my desktop, which caused a large crash that resulted in my computer absolutely refusing to boot, even when I install the old card. Anyway, I had 2 hard drives.. an 80GB boot drive with my OS and software, and a 250GB drive with all of my personal data (music, movies, documents, work files, etc) that is not not working. The 80GB drive works when hooked up to a USB, but the 250GB doesn't. I did put it in another computer to find out that all of my data is still there (I had to boot into a Windows 7 disc to access the drive), but it simply won't recognize when I hook it up to a USB. How can I get my files off the drive??? It's not a bootable drive.
View 9 Replies View RelatedStart Menu Search Programs And Files Not Working?
Nov 10, 2011Just recently I have found that typing a program name into the start menu no longer returns the programs that match. I tried to install a hotfix which didn't work (update not applicable to my computer). I've seen other posts about deleting a registry key, but I don't have that registry key in the first place. I've also rebuilt the search index with no success
View 3 Replies View RelatedStart Search Programs And Files Not Working Properly
Feb 2, 2009Its been happening ever since I installed Windows 7.
For example, When I click Start, type "CC" in the search box, the Start menu displays what I intend to start (CCleaner) but when I press enter I get this:
Its acting completely wierd!
On top of that, when I right click the entry, I get a menu which is expanded towards the left awkwardly.
I also recall that I have unchecked "Allow files on this drive to have contents indexed in addition to file properties." in the properties of my Windows 7 boot drive.
And since the programs are installed there, I think the problem might be related.
I have checked it again but it dosen't have any effect!
Ipconfig Returns Nothing In Cmd / Internet Stops Working When Downloading Large Files?
Jul 11, 2012When trying to run ipconfig using the cmd it returns nothing. Also, when downloading large files my internet will stop working and then start working after a while. OS is Windows 7 Ultimate x64?
View 1 Replies View Related"Take Ownership" Of Files Not Working
Nov 18, 2012My computers hard drive (herein referred to as driveA) filled up and I installed a second drive (herein referred to as driveB) to hold all my files. Simple. Next, I updated my windows from XP to 7 Home Premium 32bit. This is where I think the trouble begins. I installed Windows 7 on driveA and let it keep a Windows.old folder to keep all my old things. Install went swimmingly and I was happy as a clam. I could operate any file any time from any location no worries.I can't open well over half of my files. The vast majority being pictures. I am talking thousands. Every picture I have taken from 2007-2010 and every picture saved from the internet along with music and videos. I have tried going through folders and individual files properties and changing permissions. I am the only user and I am the administrator but I have checked every box Allow just the same. I still cannot access my files. I don't know when this happened, or why, or how. I just know that I would sure love to have all of my wedding photos, family albums, etc. I have also tried using the registry "take ownership" tweak and the same results. Nothing changes. I have changed them all, restarted, and they still will not open. Can't see a thumbnail and no program can open it. The permissions stay saved as 'allow - all'
View 9 Replies View RelatedWindows 7 Not Updating, Indexing Not Working, Search Not Working?
Sep 2, 2012The problem likely started when I cloned my drive to a new Seagate drive using a Seatools *Seagate** utility, which I believe is actually made by Acronis. The final fix was installing new drivers for the Hard drive from Intel "Intel Rapid Storage Technology"
Symptoms =
Failure code when trying to start indexing = 0x8e5e0247
Search function would not work properly
Indexing was not working
Could not get Windows update to install
windows 7 indexing is not running acronis clone Intel Rapid Storage Technology 0x8e5e0247 windows update not working
Windows 7 And Offline Files: Exclusion Files Type Not Work
Oct 10, 2012I have a problema with windows 7 professional (64 bit, sp1), and offline files.I'm trying the functionality of offline files with a NAS network (WD my book live).Specifically, I do not want to synchronize files with certain extensions (.nef and .cr2). With gpedit.msc in Computer Configuration -> Administrative Templates -> Network -> Offline Files, I enabled "exclude files by caching", entering (in the appropriate field), *.nef; *.cr2 But the files with this extension are synchronized anyway.
View 1 Replies View RelatedMake SFC Use The Windows 7 DVD For Files To Be Replaced Instead Of The Files On The Hard Drive?
May 22, 2010Is there a way to make SFC use the Windows 7 DVD for files to be replaced instead of the files on the hard drive?
View 9 Replies View RelatedHow To Open Pdf Files On Windows 7 Files
Mar 18, 2012How do i open pdf files on windows 7?
View 2 Replies View RelatedHow To Open Pdf Files On Windows 7 Files
Mar 18, 2012How do i open pdf files on windows 7?
View 3 Replies View RelatedDVD (not Working) Not Found In Device Manager, 1 USB Port Not Working?
Oct 22, 2012I have a HP dv6910us Pavilion and the DVD is not listed in Device Manager. DVD Tray opens and light comes on but does not play DVD. 1st USB port on left side gets - USB Device Not Recognized.One under it works and one on the right side works.OS Windows7 Ultimate. It is running kind of screwy so I wanted to reinstall Windows7 but with the DVD not operating Can't do it. Seems like maybe something in the register got erased or corrupted. If I can get the DVD and USB port to work I won't have to reinstall Windows 7
View 2 Replies View RelatedMouse Cursor Working In Background Not Working?
Nov 13, 2009i have a problem with my mouse cursor.... when it is performing something it become busy... right.. and sometimes the mouse cursor will rotate... or the working in background.... it doesnt rotate anymore.. i mean the windows aero scheme.. i am using a windows 7 os... i dnt know what is the problem,.. i alreay have the tuneup utilities 2010.. still no progree.. plls help me resolve my problem
View 9 Replies View RelatedInternet Wireless Not Working On PC But Working On Other Computers?
Aug 20, 2012I'm using Windows 7 Home Premium.My wireless connection has been working on and off for a while, but now it just refuses to work.The other computers in the wireless network are working just fine, so it must be definitely something in my laptop.I can detect the network just fine, with good signal.It says:
Media State: Enabled
IPv4 Connectivity: No internet access
IPv6 Connectivity: No internet access
Also, in the activity there are Bytes sent and received, but I cannot connect to any webpage either with Chrome of Firefox I'm using McAfee Security Center. I tried turning off the firewall, but it still doesn't work.
Temp Internet Files Folder Is 118GB Full, But No Files?
Feb 6, 2012I have my tower pc on constant all day- to record a streaming IP Camera from my work.Initially, I saved these files into my docutments- which they would save as .avi files, and after every several days I would delete them as they would take up ALOT of space on my pc.My pc is 250GB in size, and usually it would be about 80GB full before I had the IP Camera. Just recently, I noticed all of the IP Camera avi files seemed to have disappeared from my documents if I went directly to the folder... I could still see them in documents when I was choosing a location to save the recordings.Upon right-clicking the avi files in the latter, the files would be of no size and wouldn't play.Now my computer is 210GB full in the matter of a week.
View 1 Replies View RelatedWord 2007 Only Opening Old Files, Not Open Revised Files?
May 16, 2012My wife has Windows 7 home premium x64 on her laptop and is using Word 2007. The problem she is having is she will open a word file, change it up, save it, then re-open it later and its the old file not the new one. Where as I can open the edited file on my desktop running the same OS but with Word 2010 and the file that opens for me is the newest version.
View 3 Replies View RelatedOffline Files Doesn't Update Files Changed Locally
Feb 5, 2010My offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
View 2 Replies View RelatedPagefile, Temporary Int Files, Temp Files Reset After Update?
Feb 18, 2013I have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
Why Do Thumbnails For Video Files Show Up As Separate PNG Files
Jun 3, 2012I didn't used to have this problem before. For some unknown reason, all my video files have a separate PNG file next to it with a picture of the thumbnail. I don't remember changing any viewing options that may have triggered this.
View 2 Replies View Related
