Fresh Installation Of Windows 7 Onto New SATA Drive
Jun 24, 2010
I recently bought a mobo and gfx card from a friend therefore decided to treat myself and bought a 1TB Hitachi SATA HDD.
As i had a dodgy DVD RW before i installed Windows 7 from my current PATA HD as a custom Installation onto the new Drive after assigning it in Disk manager, formatted and began installation.
All installed fine booted up and asked me which windows to use. selected the new OS and all good, but then, I removed the old PATA drive assuming there would be a Boot block on the new drive allowing boot up with the fresh windows installation and all i got was No boot disc found, please.. bla de bla... so i checked all BIOS settings to make sure all boot sequences were in the right order.. which they were..
I then resorted to put the old PATA HD back in and as soon as i hit the power button there was a spark from the PATA HD i'd just wired back up... Nothing for it to short on as it was laying flat on top of my case. now this wont boot either and im just getting the same message as before whatever i do.
I thought maybe this had blown the IDE slots on the motherboard, so i put my old mobo in and all components, i now get the selection for Windows 7 / Windows 7 (PATA) or Older version of windows. but now when i try and boot the fresh installation of Windows 7 on the SATA drive, it gets to the logo startup screen and restarts.
View 5 Replies
ADVERTISEMENT
Nov 26, 2009
I am attempting to install a Windows 7 OEM x64 onto an older machine I have. MB is a Foxconn NF4UK8AA-8EKRS, CPU is AMD Athlon 64 x2, 4200+ 2.25 GHz, RAM 1GB. I installed a new OEM 500GB SATA hard drive unformatted.
Current OS is Windows XP Home SP2, I deleted SP3 since it was giving me some problems with auto login.
My DVD drive will not read the Windows 7 installation disk, similar to another post the drive just flashes, never spools up. It will read other CDs and DVDs.
I initialized the hard drive but have not partitioned or formatted the new SATA hard drive which is where I want to install the new OS. While the BIOS recognizes the drive, its not listed on Computer tree.
I have copied the Windows 7 OEM DVD contents onto a Folder that I created on a Toshiba External USB drive. Only had a 2GB USB Flash Drive so thought I would use the external drive and select the setup.exe in the Windows 7 files I copied into a folder without formatting a complete 250GB ext USB drive.
Question, can I partition and format the new SATA drive using the Windows XP Home Edition with an NTSF format and will this be recognized by Windows 7?
Question, can I install Windows 7 from the Toshiba Ext USB drive's folder onto the newly formatted SATA drive? Or does Windows 7 require a different formatting setup?
The BIOS and MB won't recognize a DVD drive it only allows a boot from CD. I removed the CD and DVD master/slave parallel cable and only installed the DVD as the master, but Windows 7 DVD just blinks and never spins the drive.
If I can get the new OS installed I'll remove my two older 40GB PATA hard drives and add more RAM. This machine is for my wife's use since it was in the garage gathering dust. Thought I would revive it and set up a wireless home group between my machine and her's. I added an all in one printer/copier/scanner in addition to the HP Photosmart D7460 I have so we can share files, printers and Internet connection.
I have been building my own machines since about 1990. Building a machine is fun (takes maybe 2hrs) but all the software kicks my butt. Also I went to the OEM System Builder License at Microsoft OEM Partner Center that is the most confusing arrangement I have ever seen. I'm just a home builder having fun, not a business, must I buy the full version to get this installed?
View 1 Replies
View Related
Feb 20, 2011
I am having problems installing windows 7 on a fresh, formatted drive, it keeps telling me I don't have enough space to install windows seven on the drive, but its a 500gb Hitachi deskstar.
View 3 Replies
View Related
Dec 7, 2009
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive.
It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems.
Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems.
View 2 Replies
View Related
Aug 10, 2011
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies
View Related
May 7, 2011
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies
View Related
Jul 22, 2012
I was wondering if someone could help me out. I just recently installed a new copy of windows on my OCZ Vertex 3 90GB SSD. When the computer restarted to finish the setup, it gave me a BSOD for .5 second and then restarted my computer.I have it in my Bios that it's configured where it uses AHCI because for some reason IDE no longer identifies all of my SATA ports and what's plugged in them.I do not have a factory built PC. I have a Gaming Rig I've built myself. I'm simply at loss of ideas on how to fix this problem I'm having with this SSD. My stats are as follows:
[code]...
View 1 Replies
View Related
Oct 6, 2012
I am putting together my own computer and am putting in a 1TB HDD and 120GB SSD. Seems as I cannot get a definitive understanding of whether or not I need to format and partition each of these drives. I want to install Windows 7 on the SSD and use the HDD for other programs and data. So do I format and not format each of these drives?
View 5 Replies
View Related
May 28, 2012
I have installed Windows 7 on a fresh SATA drive, and it runs extremely slow and jumpy. When I open "My Computer" it does it but it loads it in at least 15 seconds. Most of the windows are really sluggish.
View 3 Replies
View Related
Mar 10, 2012
I seem to be having an issue doing a fresh install of Windows 7 x64 Enterprise on a 40GB Intel 320 series SSD. The install will go as far as 'Completing Installation' before the screen goes blank, the computer restarts, makes another attempt to complete installation, with the screen eventually going blank again (monitor indicator turns amber, system non-engaged)I've done an extensive amount of Googling, and have followed the installation guide found here on the sevenforums - SSD / HDD : Optimize for Windows Reinstallation (specifically, routine #4)[CODE]
View 3 Replies
View Related
Apr 8, 2011
I have Dell Inspiron N5010 laptop, Intel core i3 2 GB ram and 320 gb hardrive. I was running windows 7 home bsic edition 32bit on it.Everything was going fine.Then I saw some files in my E: drive with the .dll exension which i think were reated to the microsoft visual C++ enviroment and i deleted them .Lap top was sill running fine. But when I shut it down and turned on again it gave an error on startup that "one or more peripheral devices may have been removed imporperly". So I formaed my C: drive, where windows was installed and re-installed windows 7 basic 32 bit. Bu even a fresh copy of windows was taking 5 to 6 minutes to boot up after the "windows is starting screen" but eventually it did start. when I tried installing my drivers it gave an error that the drivers are not supported by this system.
And I know the drivers are the correct one because I have used them before with this same windows and same laptop. So I again formatted my C: drive and this time installed windows 7 ultimate 64 bit. But the problem is same it takes 5 to 6 minutes on the "windows is starting screen" and then eventully starts up. And I ran "HDTune" software to see if if my hardrive was okay....and it gave no errors. I even set my bios to "restore default setings" but still no luck.I even tried disk de-fragmenation.....and yeah the drivers wont install even in the windows 7 ultimte 64 bit edition.
View 2 Replies
View Related
Nov 18, 2010
Seems my laptop has got several problems & i guess i need to do a fresh installation. But i don't have recovery disc. I've Windows 7 Home premium x64 Genuine version. The ACER's backup utility is not working. So is there anyway to create just a system recovery image? or someother way to do a fresh installation without loosing the product key?
View 8 Replies
View Related
Jun 11, 2011
lled Win 7 x64 on my PC which was running Win XP SP3 x64 without any problems.I formatted my drive and did a clean install. After install my sytem wont boot and it says File: ntoskrnl.exeStatus: 0xc0000428Info: Windoes cannot verify the digital signature for this file.My BIOS is the latest for my Gigabyte G31M-ES2C and I formatted the complete hard drive before install using GParted. I have cleared my CMOS memory and I tried reinstalling and repairing the system too. I checked my TwinMos 2GB RAM for errors and it is fine too. I have two hard drives both SATA WDC caviar blue 250gb (master) and 160gb(slave).
View 9 Replies
View Related
Oct 3, 2012
I have partitioned my main hdd into 2, one is for system install only and the other has programs / game installations. I want to put a fresh install on my system partition but wonder how difficult it will be to use the programs from the other partition, eg. Will i have any registry problems if i try to run the programs straight away? Some of these programs are hefty in size...
View 1 Replies
View Related
Jan 12, 2010
I'm having Athlon XP 2000+, 1 Gig Ram, GA-7VKMP-P,Seagate 80GB (7 Yrs old build) running with Windows Pro XPSP3
Last Saturday, I tried to install the Windows 7 Professional ( Downloaded from MSDN). When tried to boot from DVD it said " Windows Cannot Boot From this drive. CODE- 5".
I tried from my another DVD drive. Same Error.
Changed all possible jumper settings for HDD and DVD-RW's ( All IDE) as Pri- master/Slave, Sec Master/Slave. Nothing Worked.
Also I tried with another copy of Win 7 Home Premium came with my Dell Laptop (Worked fine for fresh installation in my laptop). Still same Error.
But I'm able to install both Windows 7 Home Premium and Professional in the same system, starting installation from XP (Not Booting from DVD).
Now I installed Windows 7 Pro as I said and after that I deleted Windows.old folder. All running fine.
With some curiosity, I tried to boot again from DVD drive with Windows 7 Dvd, same Error, even after installing Windows 7.
Till now I don't Know how to perform a clean installation of Windows 7 in my system.
View 11 Replies
View Related
Oct 20, 2012
I'm having an issue with my tower that I built and I'm wondering if starting with a fresh OS installation will do the trick. My current setup is one hard drive for nothing but the OS and programs and multiple other drives to save files to. My issue is that I use the Windows Backup utility to backup the drives that contain important information. If I were to install a fresh copy of the OS, I imagine that the system wouldn't realize that I've performed a backup on the other drives before and would want to do a complete backup all over again rather than being able to do an incremental backup. Is there a way to backup the settings and log files of the Windows Backup utility to move to the new OS? The drive letters and everything else will be the exact same as they are right now. This also makes me curios of how other backup programs behave when the OS has to be reinstalled.
View 2 Replies
View Related
Oct 8, 2010
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
View 9 Replies
View Related
Apr 12, 2012
Just built a moderate spec gaming PC from scratch, and all has went according to plan except when I try to install Windows 7, my hard drive won't show up. My new motherboard doesn't have any IDE slots, but I only have an IDE hard drive. I am using a 'Pluscom Serial ATA PCI Adapter' to connect my hard drive to the computer as it has 1 IDE slot on it. I don't have a disc for drivers and don't know where to start. I am running Ubuntu on it at the moment so I can download any drivers I may need.
View 9 Replies
View Related
Dec 12, 2009
I get the error message below when I attempts to perform a custom installation of
Windows 7 (Ultimate, 32 bits version) on a logical partition of 16 GB formatted in NTFS with a Seagate SATA disk ST3250823AS .
windows is unable to install to the selected location -- error x80040154
I saw that it is possible to load drivers on my hard drive during installation.
The problem is that on Seagate website, drivers are no longer available.
I tried to extend the partition to 20 GB, but it failed too.
View 3 Replies
View Related
Jan 22, 2013
I need to reinstall my Windows 7 from cracked to legal. My PC has 3 HD in it. 200 GB SATA, 200 GB Primary IDE and 160 GB Secondary IDE. It is currently loaded on the 200gb Primary IDE and the other 2 are for backup and saving data. Would I be better off installing Windows 7 on the SATA drive and using both IDE drives for backup and saving data? If so is the easiest way to just disconnect the IDE drives until Windows 7 is installed then format the original OS drive to use for backup?
View 1 Replies
View Related
Feb 28, 2011
I have just got a new Solid state drive and i wanted to do a fresh install of Windows 7 but have been wondering the best way to go about it. Do i do one of the following after backing up all needed data.
1) just unplug all the other harddrives and plug in the new SSD drive and boot up the CD from there. Then at after the install just plug back the old hard drives (even with the windows 7 install) and then reformat them from windows.
2) Run the computer with the Windows 7 Disc and select the solid state drive and ask for a fresh install. Im not too sure that this is a viable option.
View 7 Replies
View Related
Feb 1, 2013
Got a virus in my old drive. I bought a new drive and tried to install Windows 7 on it and slave the old drive so to pull files off I wanted, and then format the drive. This did not work. All I get is the Windows blue screen with the dove on it, and no desktop.
View 3 Replies
View Related
Aug 10, 2012
I have built a new system with a 60GB SSD to install the OS on and a 2TB hard drive for everything else. The 2TB drive can be seen in the BIOS but cant be accessed from windows.
View 1 Replies
View Related
Mar 25, 2011
I have a custom built HTPC with a Seagate SATA drive. Media Center halted, and Win7 would not reboot. When I attempt to reinstall Win7 it cannot find the drive (C) - "No drive were found. Click Load Driver to provide a mass storage driver for installation."
My research tells me SATA drives don't have drivers. I've changed BIOS SATA drivers from "Enhanced" to "Compatible" with no effect.
Don't know what to try next.
View 4 Replies
View Related
Jun 3, 2012
I want to install a fresh copy of Win 7 on a second actually third hard drive my question is do I just run it from my present Windows installation or do I run at boot up from the BIOS? My quandary is when in the BIOS I can't tell which drive is which? I do not want to wipe out my present installation is my question
View 3 Replies
View Related
Apr 12, 2012
I just built my first computer, and it has an SSD and an HDD. I installed a fresh copy of Windows 7 on the brand new SSD, and on the C Drive I'm seeing a windows.old file that is 11.5GB, and there is a windows file that is 12.3GB. I don't get this at all. Like I said, it is my first computer.....everything seemed to go well with the build, and sp far things are working, but I know this isn't right. This was a brand new drive, like I said, I do remember when it was going through the different parts of the install, and restarting several times, that it seemed like it was staarting at the beginning again.....as If when it had finished, I didn't take the DVD out, and was basically starting the install "again"....if that makes sense, I stopped it, and pulled the DVD and it booted up, and seems o.k.
View 3 Replies
View Related
Aug 2, 2012
i'm looking to do a fresh install of Win 7 (mostly just to reorganize my HDD setup) and here's the catch - I have a secondary drive with all my games, program files, data, etc. and I'm wondering if there's an easy way to get the new Windows install to recognize these applications without having to reinstall them all. I know I could go into the registry and change keys, but that would probably take longer than reinstalling them all.
View 4 Replies
View Related
Dec 8, 2012
Have XP on C drive and looking to install Win 7 on 2nd Sata drive for dual boot. However, when installing a 2nd Sata drive my XP bios identifies it correctly as a Sata drive but my PC Disk management recognises it as a Removeable disk preventing me from installing Win 7. I have tried a couple of different Sata disks with the same result.
View 6 Replies
View Related
Jul 16, 2011
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies
View Related
Oct 20, 2011
i have a HP g61 with a 500 gig SATA drive when i try to install windows XP on it i get a windows stop messsage
Stop: 0x0000007b (0xf78d663c, 0x00000034, 0x00000000,0x00000000)
when googled it says something about the sata drive settings needing to be changed in the bios chang the setting for the sata operation from Raid auto/achi to raid auto ata but in the bios of the hp g61 there is no option for that, i verified this will work for the error because i just restored a dell vostro with a sata drive and it did work, now i just need to get this hp to work it has insydeH20 bios setup utility,
View 1 Replies
View Related
Jun 28, 2011
I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer
View 3 Replies
View Related
