Seems my laptop has got several problems & i guess i need to do a fresh installation. But i don't have recovery disc. I've Windows 7 Home premium x64 Genuine version. The ACER's backup utility is not working. So is there anyway to create just a system recovery image? or someother way to do a fresh installation without loosing the product key?
View 8 Replieslled Win 7 x64 on my PC which was running Win XP SP3 x64 without any problems.I formatted my drive and did a clean install. After install my sytem wont boot and it says File: ntoskrnl.exeStatus: 0xc0000428Info: Windoes cannot verify the digital signature for this file.My BIOS is the latest for my Gigabyte G31M-ES2C and I formatted the complete hard drive before install using GParted. I have cleared my CMOS memory and I tried reinstalling and repairing the system too. I checked my TwinMos 2GB RAM for errors and it is fine too. I have two hard drives both SATA WDC caviar blue 250gb (master) and 160gb(slave).
View 9 Replies View RelatedI have partitioned my main hdd into 2, one is for system install only and the other has programs / game installations. I want to put a fresh install on my system partition but wonder how difficult it will be to use the programs from the other partition, eg. Will i have any registry problems if i try to run the programs straight away? Some of these programs are hefty in size...
View 1 Replies View RelatedI'm having Athlon XP 2000+, 1 Gig Ram, GA-7VKMP-P,Seagate 80GB (7 Yrs old build) running with Windows Pro XPSP3
Last Saturday, I tried to install the Windows 7 Professional ( Downloaded from MSDN). When tried to boot from DVD it said " Windows Cannot Boot From this drive. CODE- 5".
I tried from my another DVD drive. Same Error.
Changed all possible jumper settings for HDD and DVD-RW's ( All IDE) as Pri- master/Slave, Sec Master/Slave. Nothing Worked.
Also I tried with another copy of Win 7 Home Premium came with my Dell Laptop (Worked fine for fresh installation in my laptop). Still same Error.
But I'm able to install both Windows 7 Home Premium and Professional in the same system, starting installation from XP (Not Booting from DVD).
Now I installed Windows 7 Pro as I said and after that I deleted Windows.old folder. All running fine.
With some curiosity, I tried to boot again from DVD drive with Windows 7 Dvd, same Error, even after installing Windows 7.
Till now I don't Know how to perform a clean installation of Windows 7 in my system.
I'm having an issue with my tower that I built and I'm wondering if starting with a fresh OS installation will do the trick. My current setup is one hard drive for nothing but the OS and programs and multiple other drives to save files to. My issue is that I use the Windows Backup utility to backup the drives that contain important information. If I were to install a fresh copy of the OS, I imagine that the system wouldn't realize that I've performed a backup on the other drives before and would want to do a complete backup all over again rather than being able to do an incremental backup. Is there a way to backup the settings and log files of the Windows Backup utility to move to the new OS? The drive letters and everything else will be the exact same as they are right now. This also makes me curios of how other backup programs behave when the OS has to be reinstalled.
View 2 Replies View RelatedI was wondering if someone could help me out. I just recently installed a new copy of windows on my OCZ Vertex 3 90GB SSD. When the computer restarted to finish the setup, it gave me a BSOD for .5 second and then restarted my computer.I have it in my Bios that it's configured where it uses AHCI because for some reason IDE no longer identifies all of my SATA ports and what's plugged in them.I do not have a factory built PC. I have a Gaming Rig I've built myself. I'm simply at loss of ideas on how to fix this problem I'm having with this SSD. My stats are as follows:
[code]...
I am putting together my own computer and am putting in a 1TB HDD and 120GB SSD. Seems as I cannot get a definitive understanding of whether or not I need to format and partition each of these drives. I want to install Windows 7 on the SSD and use the HDD for other programs and data. So do I format and not format each of these drives?
View 5 Replies View RelatedI recently bought a mobo and gfx card from a friend therefore decided to treat myself and bought a 1TB Hitachi SATA HDD.
As i had a dodgy DVD RW before i installed Windows 7 from my current PATA HD as a custom Installation onto the new Drive after assigning it in Disk manager, formatted and began installation.
All installed fine booted up and asked me which windows to use. selected the new OS and all good, but then, I removed the old PATA drive assuming there would be a Boot block on the new drive allowing boot up with the fresh windows installation and all i got was No boot disc found, please.. bla de bla... so i checked all BIOS settings to make sure all boot sequences were in the right order.. which they were..
I then resorted to put the old PATA HD back in and as soon as i hit the power button there was a spark from the PATA HD i'd just wired back up... Nothing for it to short on as it was laying flat on top of my case. now this wont boot either and im just getting the same message as before whatever i do.
I thought maybe this had blown the IDE slots on the motherboard, so i put my old mobo in and all components, i now get the selection for Windows 7 / Windows 7 (PATA) or Older version of windows. but now when i try and boot the fresh installation of Windows 7 on the SATA drive, it gets to the logo startup screen and restarts.
I have installed Windows 7 on a fresh SATA drive, and it runs extremely slow and jumpy. When I open "My Computer" it does it but it loads it in at least 15 seconds. Most of the windows are really sluggish.
View 3 Replies View RelatedI am having problems installing windows 7 on a fresh, formatted drive, it keeps telling me I don't have enough space to install windows seven on the drive, but its a 500gb Hitachi deskstar.
View 3 Replies View RelatedI seem to be having an issue doing a fresh install of Windows 7 x64 Enterprise on a 40GB Intel 320 series SSD. The install will go as far as 'Completing Installation' before the screen goes blank, the computer restarts, makes another attempt to complete installation, with the screen eventually going blank again (monitor indicator turns amber, system non-engaged)I've done an extensive amount of Googling, and have followed the installation guide found here on the sevenforums - SSD / HDD : Optimize for Windows Reinstallation (specifically, routine #4)[CODE]
View 3 Replies View RelatedI have Dell Inspiron N5010 laptop, Intel core i3 2 GB ram and 320 gb hardrive. I was running windows 7 home bsic edition 32bit on it.Everything was going fine.Then I saw some files in my E: drive with the .dll exension which i think were reated to the microsoft visual C++ enviroment and i deleted them .Lap top was sill running fine. But when I shut it down and turned on again it gave an error on startup that "one or more peripheral devices may have been removed imporperly". So I formaed my C: drive, where windows was installed and re-installed windows 7 basic 32 bit. Bu even a fresh copy of windows was taking 5 to 6 minutes to boot up after the "windows is starting screen" but eventually it did start. when I tried installing my drivers it gave an error that the drivers are not supported by this system.
And I know the drivers are the correct one because I have used them before with this same windows and same laptop. So I again formatted my C: drive and this time installed windows 7 ultimate 64 bit. But the problem is same it takes 5 to 6 minutes on the "windows is starting screen" and then eventully starts up. And I ran "HDTune" software to see if if my hardrive was okay....and it gave no errors. I even set my bios to "restore default setings" but still no luck.I even tried disk de-fragmenation.....and yeah the drivers wont install even in the windows 7 ultimte 64 bit edition.
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies View RelatedI just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies View RelatedSo i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fresh from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems.Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. [code]
View 5 Replies View RelatedMy work machine's HDD is on its way out. It currently has XP Pro x86 on it. I got a fresh new HDD and upgrade version of Win7 x64 Pro.
I booted from the Win7 x64 disc, it went through its whole install thing on the new HDD, and then when it got to the product key, it wouldn't accept the one that came in the box. I read on the web that upgrade versions must have XP or Vista already installed for it to work.
But, the 7 documentation says I have to do a Custom install if I'm upgrading from XP. A custom installation deletes whatever is on the partition, I think. So how can it work when upgrading from XP?
I have actually gone back and installed XP on the new HDD (that had its own share of problems, couldn't even get the internet connection working), and now trying to do a custom installation of 7 again. When it gets to the product key section, should I put in my original XP product key? Or will the 7 product key work this time?
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies View RelatedSo I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies View RelatedAll of these components are less than days old, bought new and put straight into this build. Keep getting a BSOD so I guess I'll try to give as much information as I can and hopefully someone can give me a hand.It's also worth noting that it seems to occur more frequently while playing Star Wars the Old Republic but has also occurred while not doing so. [code]
View 11 Replies View RelatedI have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.i will include a dx diag and cpu z .txt file Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.Let me know if there is anything else I should include
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 3/20/2012 4:21:37 PM
Event ID: 1001
Task Category: None
[code]....
I had a lot of trouble with blue screens on this system (as per profile) with a previous installation too, but never got round to dealing with it properly. So now, it's a less than week old installation that I've put very few things on yet, but crashes a *lot* when I try to run games. Does blue screen outside of this, just not as much.
The error codes vary, but most common is IRQL_LESS_OR_NOT_EQUAL.
I have/had a Windows 7 x64 Ultimate.
CPU: Intel i5 2500K clocked at 4.0ghz (stock voltage)
Cooler: Corsair H50 Cooler
Graphics: Zotac GTX 560 TI OC AMP edition
RAM: Kingston HyperX 2x 4GB Ram 1600MHZ DDR3 1600
Hard Drive: Intel 320 160GB Solid State 1.8"
Motherboard: Biostar TP67B+
Power Supply: Antec Power Supply 400W High Current
Sound card: HT Omega Claro Plus
After running the computer for about a year, with all updated drivers and such, BSODs starts to occur. At first, I assume it was a virus (had avast before); so I decided to fully reformat the hard drive with Windows 7 x64 Ultimate again. I remember reading the BSOD screen, and sometimes they had different error codes. Strangely, sometimes my hard drive would not be detected until I had to restart many times until a successful detection for the SSD would occur.So I reformatted, however; in the process of installing my first driver (Nvidia for GTX 560), I got a BSOD. Giving up hope, I decided to come here and report the problem. After that I just installed several drivers but not all.
installing Windows 7 ultimate upgrade version on fresh install with new hardware right now. i will b checking this every few min.
View 9 Replies View RelatedI'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies View RelatedI am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies View RelatedI can download and install winamp(latest version)but when i hit finish i am told that winamp has stopped to function properly,and i re-installed windows just yesterday,i do not get it,and i have not made any changes with fancy software.Winamp and my windows 7 has never had a good relationship,but it used to run on a fresh re-install,
View 5 Replies View RelatedA new Samsung 840 pro SSD is on it's way with the courier and I will remove my present OCZ and will install a fresh Windows 7 pro. At present I have the SSD divided in 2 partitions C:system and D:Programs my first question regards the opportunity to keep the 2 partitions: is it good or bad for the SSD?
1) make an iso of partition D:programs
2) remove OCZ econnect the Samsung SSD
3) Check Uefi bios if AHCI is marked
4) Install 7 on C: (automatic alignment od the SSD)
5) Create partition D:
??Optimize?? Is it better to do it at this stage? Or after having installed various programs? I think at this stage but would appreciate your suggestions including what sort of optimization is advisable. I could eventually use RT7.Then I would copy from the iso all the programs on their own place D: and from the various distribution files will make the various setup (just for the programs to be registered in the Registry)
I'm trying to install windows 7 on a new hdd for a new computer. I downloaded the student discounted win 7 professional on microsoft's site, and i'm trying to use their downloader tool to put it on my usb drive.When I go to use the downloader tool, I select the iso i've downloaded from the site as the iso I want to use, but it tells me it's not a valid iso file. Is there something else I'm supposed to do with the iso before I try to use the tool to put it on my usb?
View 5 Replies View RelatedI just got the new windows 7 ultimate... (im holding off from windows 8), and I am interested in gaming.All I want to know, what programs should i get first for absolute necessity to things that'll help or do something viable for gaming.If you dont mind, I want a list...so far I got Google Chrome only and I am wanting to know what anti virus I should be getting.
View 1 Replies View Related