Installing Fresh Copy Of Windows 7 To Another Drive?
Jun 3, 2012
I want to install a fresh copy of Win 7 on a second actually third hard drive my question is do I just run it from my present Windows installation or do I run at boot up from the BIOS? My quandary is when in the BIOS I can't tell which drive is which? I do not want to wipe out my present installation is my question
I have just got a new Solid state drive and i wanted to do a fresh install of Windows 7 but have been wondering the best way to go about it. Do i do one of the following after backing up all needed data.
1) just unplug all the other harddrives and plug in the new SSD drive and boot up the CD from there. Then at after the install just plug back the old hard drives (even with the windows 7 install) and then reformat them from windows.
2) Run the computer with the Windows 7 Disc and select the solid state drive and ask for a fresh install. Im not too sure that this is a viable option.
I tried installing Windows 7 64 bit OEM on a fresh hard drive but it kept crashing and now when I try booting the system seems to think Windows is installed saying ''Windows failed to start'' in boot manager. I even tried loading the computer up with a different hard drive but it STILL says that!
Today I restarted my main audio machine and the C drive wont bootTurns out the pcb on the drive has a burn mark... So by luck there is a identical drive in the same machine bought on the same day I unscrewed the pcb from the working drive and gave it a shot and to my surprise my data recovery software - file scavenger was able to recover all the files and folders in their native file structure....I want to now move them to the new drive and have it boot up into that system...I was wondering if I install a fresh os Windows 7 64 on to the new drive and pull that drive out of the machine and put it on the chain of the other computer that has the rescued files on it. Can I then copy the rescued files to the drive with the freshly installed Windows 7 64 on it and over write the files with my old systems files? After doing that and returning the drive to my old system will the old system boot up? Is there any tricks anyone can suggest short of re installing everything. I have a shitload of 3rd party plug ins which would take months to re instal... Not to mention my dsp audio card drivers and host environment, utils and the list goes on.If i can get this up and running I swear I will make a backup image and will never be in the same situation again...
i had Windows 7 in my system but i wanted to format the drive and install a new fresh copy, so i went ahead and i started Windows 7 dvd and i have to mention that the hdd that i had my old win installed in was a partition of a 1tb hdd and it's divided into(195GB &750GB), so my system was installed in the 195GB partition. then i went into installation and i formated the 195GB hdd and when i hit next it gives me this meassage "Windows is unable to install to the selected location (Disk1 Partition1). Error 0x80300024".
I would like to instal a fresh copy of windows 7 on my laptop but don't have the disks. However i found the product keys on the bottom of my laptop that i am sure are windows7. now where do i find the disks?
I have a desktop with Windows 7 & a 1TB HDD, and everything is on the HDD. If I want to add an SSD & put the OS & some programs on it is there an easy way to do that? Perhaps copying all the data folders to an EHD & then making an image of the stripped down HDD & restoring that to an SSD? And then putting the data folders back onto the HDD?Or do I have to start from scratch & re-install a fresh copy of Windows 7 to the SSD?
I have a laptop ASUS G60JX and it came with Windows 7 Home Premium OEM Pre-activated, so unfortunately i have formatted it now i want to install a WINDOWS 7 HOME PREMIUM X64 BIT OPERATING SOFTWARE, so which one should i download a RTM version or OEM version, because i want to download a copy of windows and then i will use my genuine key which is installed under my laptop, reply asap.
I'm trying to install windows 7 on a new hdd for a new computer. I downloaded the student discounted win 7 professional on microsoft's site, and i'm trying to use their downloader tool to put it on my usb drive.When I go to use the downloader tool, I select the iso i've downloaded from the site as the iso I want to use, but it tells me it's not a valid iso file. Is there something else I'm supposed to do with the iso before I try to use the tool to put it on my usb?
I have an Asus c90s laptop and about 6 months ago I updated to windows 7 after vista didnt work when I updated the BIOS. At first my USB ports and everything worked but over time they stopped working one by one. My CD/DVD burner also stopped writing cd/dvds. I believe this was most likely due to the fact that I updated windows automatically. Recently I downloaded the Windows 7 ISO and mounted and installed it. It didn't ask for my product key and I believe it simply backed up my old configuration, drivers, updates, etc when it installed. Because of this my USB ports still don't work and I really need to use my mouse as my finger pad is in rough shape. I was wondering if I used another computer to burn the ISO image to a disk and booted from there would it install fresh? Without the updates that most likely caused my USB ports to stop working.I've tried every fix for the USB ports and simply can find no solution.
how can you be sure you have installed all the Drivers when you reinstall a Fresh copy of windows like for my Motherboard i noticed i need 1 driver so that my PC would stop getting a BSOD every Time i ran a full Screen game (it was like a ATK0001 Driver or something liek that for my ASUS M4N78 PRO mother board)
I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
My computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.
When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.
win7 disk from the prompt, however the Repair option isnt avaialbe, my "Partition 1" with windows currently on it is 484gb's and only 21 is free, i cannot system restore, safe mode or anything so this is my only option, i cant backup any data as i have no externals, and i need everything on this drive intact, so formatting isnt an option but the OS is unbootable due to a bad driver, which i cant fix, im at the Win7 setup screen ive clicked install, accepted terms, and now i have to select the partition to instal windows on i have my 100mb recovery and my main partition, with all my stuf on it, if i choose this partition and click next but i dont click the format button
when I want to install my OS (Windows 7 home premium 64 bit - CD bought from store) on my SSD, I get the error 0x80070570 - corrupt files during the "Expanding Window files" process. I have used that CD to install on my previous PC with no problem.Thinking the CD was the problem, I downloaded a ISO and burned it with PowerISO Tried installing and same problem happens.eading on the internet from multiple forums, some mentioned trying with a 2gb ram stick only. Not having a 2gb stick, i still tried removing one of them (4gb sticks).Doing that i managed to complete installation until the "Completing..." part of the install, at which step computer crashed with a BSOD.
Here is a summary of things I have tried:-2 different ISO-Installing on my HDD-Clearing CMOS-Restoring BIOS to default-Trying 1 stick of RAM (4gb)-Transferring SSD on working computer, installed Windows, then transferred to new computer using Sysprep Recently I Flashed my BIOS with the most recent update (Z68BFC15.BST). I managed to install windows and drivers, but when i add my 2nd stick of RAM (total 8gb) computer won't boot (BSOD at windows loading page).Is it hardware problems?
I recently wiped my main HDD to perform a clean install of windows however after choosing to do the advanced install windows alerts me that drivers for the HDD's are missing. When I go to load my drivers from my USB the setup gives me an error that it cannot find the driver files from the USB in the folder I stored them in however it detects the 32 bit versions I have saved. I proceed with those, choose the 64 bit OS and proceed with the installation however this just throws my comp into a boot loop when it reaches the restart part of the install most likely from the computer having the 32 bit drivers. The next time I try to install i proceed by loading the 32 bit drivers and then when told to choose the HDD to install the OS I click the load drivers button, this time it detects the 64 bit drivers however will not let me install them as they are not digitally signed. I have a feeling setting my HDDs to AHCI in my boot options will allow me to install without all of the driver problems. However I have been told that doing so would wipe my data HDD that I currently have all my stuff on.
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
Got a virus in my old drive. I bought a new drive and tried to install Windows 7 on it and slave the old drive so to pull files off I wanted, and then format the drive. This did not work. All I get is the Windows blue screen with the dove on it, and no desktop.
I recently bought a mobo and gfx card from a friend therefore decided to treat myself and bought a 1TB Hitachi SATA HDD.
As i had a dodgy DVD RW before i installed Windows 7 from my current PATA HD as a custom Installation onto the new Drive after assigning it in Disk manager, formatted and began installation.
All installed fine booted up and asked me which windows to use. selected the new OS and all good, but then, I removed the old PATA drive assuming there would be a Boot block on the new drive allowing boot up with the fresh windows installation and all i got was No boot disc found, please.. bla de bla... so i checked all BIOS settings to make sure all boot sequences were in the right order.. which they were..
I then resorted to put the old PATA HD back in and as soon as i hit the power button there was a spark from the PATA HD i'd just wired back up... Nothing for it to short on as it was laying flat on top of my case. now this wont boot either and im just getting the same message as before whatever i do.
I thought maybe this had blown the IDE slots on the motherboard, so i put my old mobo in and all components, i now get the selection for Windows 7 / Windows 7 (PATA) or Older version of windows. but now when i try and boot the fresh installation of Windows 7 on the SATA drive, it gets to the logo startup screen and restarts.
I just built my first computer, and it has an SSD and an HDD. I installed a fresh copy of Windows 7 on the brand new SSD, and on the C Drive I'm seeing a windows.old file that is 11.5GB, and there is a windows file that is 12.3GB. I don't get this at all. Like I said, it is my first computer.....everything seemed to go well with the build, and sp far things are working, but I know this isn't right. This was a brand new drive, like I said, I do remember when it was going through the different parts of the install, and restarting several times, that it seemed like it was staarting at the beginning again.....as If when it had finished, I didn't take the DVD out, and was basically starting the install "again"....if that makes sense, I stopped it, and pulled the DVD and it booted up, and seems o.k.
i'm looking to do a fresh install of Win 7 (mostly just to reorganize my HDD setup) and here's the catch - I have a secondary drive with all my games, program files, data, etc. and I'm wondering if there's an easy way to get the new Windows install to recognize these applications without having to reinstall them all. I know I could go into the registry and change keys, but that would probably take longer than reinstalling them all.
I just formatted my C-Drive and installed a fresh copy of windows 7 ultimate on it. After restart, I got the following screen - See image attached. Now Windows can't boot at all. I tried using a system repair disk but it doesn't work. I doubt if it is a hardware problem, since I can access the boot menu and its options, but as I said, running the repair disk fails, I keep on getting that screen when it restarts.
I just reinstalled Windows 7 on a new hard drive and during the installation process, I split the disk into two equal partitions of 500gb. In 'My Computer' I can only see one partition which is the C drive but not the other partition. Looking in Disk Management, the other partition seems to be labelled as 'Unallocated'. How can I allocate this into a usable D drive? I would have expected this to happen automatically during the installation process.
I am having problems installing windows 7 on a fresh, formatted drive, it keeps telling me I don't have enough space to install windows seven on the drive, but its a 500gb Hitachi deskstar.
I bought a new 2 Tb hard drive because my primary one was getting full. I would like to do a fresh install on the primary drive once I have moved over all the games, videos, pictures, etc. that I don't want to lose. I can format the primary drive and reinstall windows without affecting the content on the second drive, correct? Is there anything I need to know?
I was thinking of doing a fresh install of Windows 7 64bit Ultimate. Currently I am running the same. but wanted to do a fresh install. The problem is that My DVD drive is not working.. and I took it out. Need steps in installing windows 7 64bit Ultimate using USB pen drive. I want to wipe out the entire hard disk before doing that and want to do the fresh install. One of my friends when tried to do like this, his bootable USB pen drive was not detecting via BIOS.
I was looking at the Dell Inspiron Zino HD to replace the full tower PC in my living room that has lower specs. Right now my living room PC is running Ubuntu 9.04 with Boxee so if I did order the Zino HD I would install Ubuntu on it and not need Windows.
My question is can I take the copy of windows that comes with the Zino HD and give it to my sister to put on her PC? Right now she has XP(was running Vista but she downgraded). Also, her computer is not a Dell, if that matters. It does have a 64 bit Intel chip though, so would I need to order a 64 bit version of Windows 7 with my Zino HD?
I haven't called Dell to see if I can get a Zino HD OSless but that is always a hassle and my sister could use a copy of Windows 7.
If it is possible do I call Microsoft right away to deactivate it or can I just give her the CDs to my sister and install and activate on her computer? Also, do I need to get Ultimate with my Zino HD to have it work or can I do it with the cheapest version that has 64 bit?
I've just installed a new hard drive and a fresh copy of Windows 7 Ultimate x64 on it, and I just received two BSODs within minutes of each other, citing ntoskrnl.exe withSYSTEM_SERVICE_EXCEPTION on BlueScreenView. I had periodical blue screens before my last HDD died so it's most likely something else causing it, maybe hardware... but not sure how to tell what. I've attached the necessary files.- the original installed OS on the system? Yes- Full retail version- What is the age of system (hardware)? About 5 years- What is the age of OS installation (have you re-installed the OS?) Two days
I've had a sudden loss of my hard drive space. I've deleted alot of stuff, like over 20GB, more then just a few times and it just disappeared in less then 2 days. I've read some topics here with the about same problem and tried what they sugested there: to use software like WinDirStat, TreeSize Free and SpaceSniffer. But they just won't show me my whole hard drive. The stop at 50% and show it as if they have scan the whole 100%.
Me and my fiance just finished putting together her first real gaming computer and we wanted to use a Patriot 64g SSD to put win 7 on and use a 1TB Seagate drive for all the rest of the storage. The installation of Win 7 onto the SSD went nice and smooth but when we get into windows it is not detecting the 1TB HD at all. Funny thing is that when I go in to the SSD properties, I can see the Seagate under the sharing options. The only info I have found is how to clone off an existing hard drive with Win 7 on it not how to do a fresh install on 2 new drives.
I am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?