how can you be sure you have installed all the Drivers when you reinstall a Fresh copy of windows like for my Motherboard i noticed i need 1 driver so that my PC would stop getting a BSOD every Time i ran a full Screen game (it was like a ATK0001 Driver or something liek that for my ASUS M4N78 PRO mother board)
View 9 RepliesMy computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.
When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.
I recently wiped my main HDD to perform a clean install of windows however after choosing to do the advanced install windows alerts me that drivers for the HDD's are missing. When I go to load my drivers from my USB the setup gives me an error that it cannot find the driver files from the USB in the folder I stored them in however it detects the 32 bit versions I have saved. I proceed with those, choose the 64 bit OS and proceed with the installation however this just throws my comp into a boot loop when it reaches the restart part of the install most likely from the computer having the 32 bit drivers. The next time I try to install i proceed by loading the 32 bit drivers and then when told to choose the HDD to install the OS I click the load drivers button, this time it detects the 64 bit drivers however will not let me install them as they are not digitally signed. I have a feeling setting my HDDs to AHCI in my boot options will allow me to install without all of the driver problems. However I have been told that doing so would wipe my data HDD that I currently have all my stuff on.
View 7 Replies View RelatedGot a new SSD and just put win 7 pro on it, However I cannot get it to connect to the internet it says to install the driver I tried to do the windows update to auto update my drivers but can not connect to the internet to even try.
How would I find out what network card I have, could I just load it to a flash drive an do it that way?
If it makes a difference it is a wired connection.
I just did a clean install of windows 7 on my computer and I don't have any drivers, I need to go onto the internet for that, but it's telling me I cant get on the internet because I dont have some driver. What do I do?
View 3 Replies View RelatedDoes Windows 7 home need any drivers to installed?
View 3 Replies View RelatedWindows 7 re-install driver recovery failure For one reason or another, i decided to re install windows 7 onto my Samsung 7 Chronos. Since I've had no issues in the past with re installing vista on my other machine, i mistakenly thought this would be a walk in the park. Anyway, now after re installing windows, multiple drivers have gone missing, and i cannot connect to the internet (on that machine) to allow windows to find them for me.The devices that are missing drivers are the following
ethernet controller (location PCI bus 3. device 0, function 0 manufacturer unknown)
Intel(R) Centrino(R) Wireless- N + WiMAX 6150 (location Port_#0003. Hub_#0004
Network Controller ( location PCI bus 2, device 0, function 0)
PCI simple communications Controller (location PCI bus 0, Device 22, function 0)
SM Bus Controller (location PCI bus 0, device 31, function 3)
Universal Serial Bus (USB) Controller (location PCI bus 4, device 0, function 0)
---------------------------------------------------------------------------------
(All of these devices have the code 28 error)
Also, My Standard VGA Graphics adapter cannot start (code 10)I have the recovery disk for windows 7, yet it failed to install these drivers. I have 1 working USB slot, which i can use to carry the drivers over from the computer i am currently using, to the one which is severely crippled at the moment.
After doing a fresh install of Windows 7 Enterprise on my Sony Vaio things are going well. I visited the Sony Vaio esupport site and it has recommended all sorts of drivers for my particular laptop. 2 questions...
1. What is the equivalent of Windows 7 Enterprise for driver purposes? 7 Ultimate or 7 Professional?
2. Do I really need the Vaio drivers if nothing appears to be wrong?
I'm trying to install windows 7 on a new hdd for a new computer. I downloaded the student discounted win 7 professional on microsoft's site, and i'm trying to use their downloader tool to put it on my usb drive.When I go to use the downloader tool, I select the iso i've downloaded from the site as the iso I want to use, but it tells me it's not a valid iso file. Is there something else I'm supposed to do with the iso before I try to use the tool to put it on my usb?
View 5 Replies View RelatedI have an Asus c90s laptop and about 6 months ago I updated to windows 7 after vista didnt work when I updated the BIOS. At first my USB ports and everything worked but over time they stopped working one by one. My CD/DVD burner also stopped writing cd/dvds. I believe this was most likely due to the fact that I updated windows automatically. Recently I downloaded the Windows 7 ISO and mounted and installed it. It didn't ask for my product key and I believe it simply backed up my old configuration, drivers, updates, etc when it installed. Because of this my USB ports still don't work and I really need to use my mouse as my finger pad is in rough shape. I was wondering if I used another computer to burn the ISO image to a disk and booted from there would it install fresh? Without the updates that most likely caused my USB ports to stop working.I've tried every fix for the USB ports and simply can find no solution.
View 2 Replies View RelatedI have just got a new Solid state drive and i wanted to do a fresh install of Windows 7 but have been wondering the best way to go about it. Do i do one of the following after backing up all needed data.
1) just unplug all the other harddrives and plug in the new SSD drive and boot up the CD from there. Then at after the install just plug back the old hard drives (even with the windows 7 install) and then reformat them from windows.
2) Run the computer with the Windows 7 Disc and select the solid state drive and ask for a fresh install. Im not too sure that this is a viable option.
I want to install a fresh copy of Win 7 on a second actually third hard drive my question is do I just run it from my present Windows installation or do I run at boot up from the BIOS? My quandary is when in the BIOS I can't tell which drive is which? I do not want to wipe out my present installation is my question
View 3 Replies View RelatedI want to install Windows on a HD with all the software that is needed WITHOUT installing any drivers. This way all I have to do is copy this HD to any other HD and have it work no matter what hardware is being used.
View 22 Replies View RelatedI plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies View RelatedI tried installing Windows 7 64 bit OEM on a fresh hard drive but it kept crashing and now when I try booting the system seems to think Windows is installed saying ''Windows failed to start'' in boot manager. I even tried loading the computer up with a different hard drive but it STILL says that!
View 1 Replies View Relatedwhen I want to install my OS (Windows 7 home premium 64 bit - CD bought from store) on my SSD, I get the error 0x80070570 - corrupt files during the "Expanding Window files" process. I have used that CD to install on my previous PC with no problem.Thinking the CD was the problem, I downloaded a ISO and burned it with PowerISO Tried installing and same problem happens.eading on the internet from multiple forums, some mentioned trying with a 2gb ram stick only. Not having a 2gb stick, i still tried removing one of them (4gb sticks).Doing that i managed to complete installation until the "Completing..." part of the install, at which step computer crashed with a BSOD.
Here is a summary of things I have tried:-2 different ISO-Installing on my HDD-Clearing CMOS-Restoring BIOS to default-Trying 1 stick of RAM (4gb)-Transferring SSD on working computer, installed Windows, then transferred to new computer using Sysprep Recently I Flashed my BIOS with the most recent update (Z68BFC15.BST). I managed to install windows and drivers, but when i add my 2nd stick of RAM (total 8gb) computer won't boot (BSOD at windows loading page).Is it hardware problems?
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies View RelatedSo I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies View RelatedI'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies View RelatedI am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies View RelatedFInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
View 2 Replies View RelatedI've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
View 2 Replies View RelatedI wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
View 1 Replies View RelatedThis PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
View 3 Replies View RelatedBought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
MOBO: ASRock Z68 Extreme3 Gen3 @ P1.30 (latest BIOS update)
CPU: Intel Core i5 2500 Sandy Bridge @ 3.30ghz
RAM: GSkill RIPJAWS 2x4gb DDR3 1333
GPU: MSI 560 GTX-TI Twin Frozr ii 2gb
PSU: Corsair TX750W
HDD: 1TB Samsung SATAII @ 3gb/sec
DVD-ROM: ASUS SATA DVD-ROM
OS: Windows 7 Ultimate 64bit RETAIL
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all..
Ive also tried to change my PSU to a different brand, but all volts seems ok.
I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
They used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
View 6 Replies View RelatedI'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
View 7 Replies View RelatedA few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
View 9 Replies View RelatedI installed Windows 7 Home Premium over Vista Business on a PC to see if it would run and tested it out for a few days. I used my installation CD that was good for only one PC. So to activate Win 7 on that 2nd PC I need to buy another copy of the OS. Can I just reinstall over the current version of Windows 7, or so I need to wipe the drive and install fresh?
View 9 Replies View RelatedIs there any way to do a fresh install without a disk that my key is for? I have a pc with no backup copies of Windows 7 Pro OA that came on it. I only have a Windows 7 Home Prem disk that I bought for my laptop. Is there anyway to make it work? Will my Pro OA key from the site of the box work with the Home Prem disk I have? Or is there somewhere at Microsoft that I can download a copy of Pro OA that I have paid for?
View 4 Replies View Related