I bought a two new firewire cards for two desktops as I transfer quite a bit of media between them regularly...When I connected them, they showed up in the device manager, however there is no network being created, so I can't start a transfer..I have searched and searched but I can't find any good info on how to create a firewire network within windows 7! I may be way off here, or missing a trick, but I need some information.
View 3 RepliesI was wondering if there is a firewire card for windows 7 and what the number is of it and where I can find one. Need it to download video from JVC camcotder.
View 1 Replies View RelatedI have a new computer running Windows 7. It is functioning well, apart from the firewire card not being recognized. Pages on the web offering advice on this kind of problems start their solutions with going to the device manager and expanding the "IEEE 1394 Bus host controllers" node in the device tree. Only I don't have such a node. How can I get the "IEEE 1394 Bus host controllers" node to appear in the device manager?
View 6 Replies View Relatedi am looking for pci firewire ieee 1394a card drivers for windows7
View 2 Replies View RelatedI have a LaCie 2TB external drive that I use to backup my internal drives using Acronis TI. On WinXP I was using Firewire800 and it worked flawlessly. When I switched to Windows 7 the Firewire800 transfer speed dropped dramatically. I've contacted LaCie and they say they can't guarantee Firewire800 with Windows7. I switched back to using USB and it works, but still slow. Would it be worth my while to install and run my TI backups via Firewire in virtual XP mode? Will this in fact work?
ps. does anyone foresee better future support in Windows7 for Firewire800?
I like the snippet tool, about time, wish there was a key shortcut, similar to OS X -
Anyway, I see in device driver that FIREWIRE sets up fine (TEXAS INSTRUMENTS) on my INTEL motherboard, but the device, high end Mackie firewire device, does not work.
Installed the MACKIE ASIO driver and nothing, not even a POP UP saying NEW DEVICE found.
This is a shame if this turns out to be true as the lack of Vista driver (more than one year after Vista came out), made me go to a Mac for the past year.
Was hoping the vista driver would work, especially since it's a standard ASIO audio driver for Vista.
I routinely get the "This device is currently in use" message when I try to eject an external drive from my Windows 7 64-bit OS. I have no idea what program might be accessing the drive to cause that message. How do I find out? I can, of course, reboot, but that shouldn't be necessary.
View 3 Replies View RelatedI have an external WD My book studio 2TB HDD connected through fireware 1394b port. but i can't transfer any files
View 2 Replies View RelatedFew weeks ago I bought an external audio interface Focusrite Saffire PRO 24 DSP. It's a firewire hardware and while using it I ocasionally get BSOD. Tried using it with both enabled and disabled onboard realtek chip but that does not solve the problem. I installed the newest software/drivers provided by Focusrite but the problem still exists.OS: Windows 7 Professional x64 CPU: Phenom II X4 945Motherboard: ASUS M4A89GTD-PRO/USB3 Memory: 2x2GB GoodRAM 1333MHz Graphics: GIGABYTE GeForce GTX 560 Ti Sound Card: Focusrite Saffire PRO 24 DSP Monitor: Samsung SyncMaster BX2240 Resolution: 1920x1080Hard Drives: Western Digital:WD3200YSWD20EARSWD6400AACS PSU: Chieftec GPS-650A Case: Fractal Design Define R3 Mouse: Logitech G700
View 9 Replies View RelatedI'm having a problem when I connect or disconnect my firewire cable I get a BSOD. I'm not sure what to do. I think I have the latest drivers for firewire.
View 6 Replies View RelatedCanon camera has firewire port but computer only has USB. Is there a cable that has firewire connection on one end for the camera connection and a USB connection for the computer?
View 1 Replies View RelatedI have a HP built box that I purchased less than a year ago. The hard drive died, along with the motherboard.I purchased a new hard drive and the full version of Windows 7 Home Premium 64bit and had the shop replace the MB, Install the new hard drive and O/S.The motherboard is an ASUS M4A785-M, with an on-board Realtek PCIe GBE Family Controller (according to Windows Device Manager).I have a couple of additional cards installed, one is an eSata controller for an external hard drive and the other is a SIIG DP FireWire 800 3-Port PCIe card.I initially installed the SIIG because the FireWire chip set is Texas Instruments, because I have a PreSonus Firestudio Mobile (sound card, recording hardware)and it only plays nicely with Texas Instruments. The SIIG card shows up in Device Manager under IEEE 1394 Bus host controllers as "Texas Instruments 1394 OHCI Compliant Host Controller", which I "assume" is correct?
My problem is the PreSonus hardware refuses show up in Device Manager or initialize (there is an indicator light on the front of the unit that will glow blue when it is connected or flash blue-red when it isn't). PreSonus has a driver set for the Firestudio Mobile, that is called Universal Control.I have attempted to install Universal Control several times, but each attempt has resulted in failure, with the Driver version showing 0.0.0 etc. I realize this is the problem, but I have no idea how to force the issue.If I could get the PreSonus drivers to install, I would be home free (I think).he PreSonus hardware should show up in Device Manager under Sound, video and game controllers, but it doesn't.I have also posted about the issue on the PreSonus forum, but haven't had any solutions posted.This computer and the hardware are what I use to run my Recording Studio and without the Firestudio, I am effectively out of business.I should also note, that I haven't even installed any other software beyond windows 7, other than a couple of utilities. Not even my DAW or the drivers for my peripheral midi devices.
I am having trouble getting the Firewire to work on this card in 7 Ultimate. I tried using legacy drivers and none work. Does anyone have any input?
View 3 Replies View RelatedMy motherboard doesn't have firewire, and for the life of me i can't find a single expansion card that has an internal pinout that I can connect the cable for my front firewire port to. The closest I found was not low-profile compatible.and this is for the computer in my description, but on monday I'm switching out the case for a low profile hec 7K09 HTPC case.
View 6 Replies View RelatedNice to see that it installs pretty good with Vista drivers, however, when changing the audio bit sample buffers
(@ 44.1K) from 256 samples to 300 samples, it caused a BSOD and rebooted the computer.
Mackie - 400F
Program=Ableton Live 7
have an older dv camera (JVC GR-DVL820EA) and would like to run it on py dual core pc with windows 7 professional. I installed my video editing software and a new firewire card and when booted it up said it couldn't install driver. Later on it said that this version of windows doesn't support firewire.
View 1 Replies View Relatedmy system cannot detect camera through firewire
View 1 Replies View Relatedi can't find s-link SL-P131 firewire card driver on internet.
View 1 Replies View RelatedI just realized that stereo output is inverted (L&R are swapped) on my Realtek front panel headphones connector and on my M-Audio Firewire card. Output is OK on Realtek rear main/front speakers connector.
View 1 Replies View RelatedI have a Dell Vostro 3450 and want to connect to a Maxtor external hard drive with a 1394 firewire connection. What kind of adapter should I be looking for?
View 1 Replies View RelatedUnable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View RelatedShould I turn off network discovery on each Windows 7 pc in a domain network after mapping each pc to server shares
View 2 Replies View RelatedI have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies View RelatedThis sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies View Relatedhow do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
View 1 Replies View RelatedToday, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies View Related