my external HDD file system before was FAT32, now i made it to NTFS using the "convert X: /fs:NTFS" command...after that, i think my HDD's "used space" went up, what could be possible problems..i used the convert command because my files in external HDD was worth more than 200gb+, so it would take long time.
View 3 Replies
i have managed my partitions but i did not made any back ups and when my i explore my new partition, i have three same folders which look like a directory but they are all folders, the files are already absent but the disk's space is occupied by my recent files what will i do?
View 2 Replies View RelatedI have a Western Digital 1 TB External USB HDD.I have used it for some time.One day, I was copying files from my laptop to the USB HDD.It was taking for ever. So, I tries to cancel it. It wouldn't cancel. So, I disconnected the USB HDD by pulling the USB chord.From that day, it is not working.When I connect it will show it as a local-disk, but not show any details like size or name of the drive. It takes forever to open right-click menu and properties. Disk Manager takes for ever to show the list of drives. If I double-click on the drive, my whole system becomes slow and windows explorer hangs.If I restart my system in Safe mode, it will show the drive in Disk Manager as RAW and it gives me an option to format.Is there a way to recover the data and the HDD.
View 3 Replies View RelatedI have one more problem with my laptop this time . i have a Dell xps 15 , i re partitioned it and made my C drive of 141 GB . i installed all the required application and from the last few days i was watching the there is less space in my C drive than it should be there. i checked out the properties and found out that only 32.6 GB of disk space is utilized out of 141 so there should be around 108 GB free instead it shows me that only 92.9 gb is free .i cleared out the temp folder and there is nothing except 3-4 files which is of some Kbs . then where is the rest 15 GB gone ? is there a virus in my pc which is eating up the space ? i am really freaked out
i have a genuine windows 7 ultimate and microsoft security essential and it is updated and i scanned it and found nothing . btw there is something more , few hours ago there was 94.8 GB free , i installed a game in another drive and i removed it after 2-3 minutes coz i didn't liked it , so after un installing the game i saw there there was 93.4 GB left in my c drive again , i removed files from the temp folder but nothing happened and now there is just 92.9 gb left ! what is happening ! i am really freaked out now
My ATA external hard disk shows up on my computer, but some partitions on it aren't working. Says I need to format them before I could use them.
View 3 Replies View RelatedI have searched google for ours trying to find a fix for this but to no avail.CD drive and virtual drives dont appear in my computer and whenever i put in a dvd nothing comes up.it appears in device manager and disc management however so i know there is nothing physically wrong with the optical drive. Under disc manager i can see the details about the dvd such as dvd name, size etc.i tried changing drive letter and path but unfortunately that doesnt fix it. the letter "applies" for a second then disappears again.
View 5 Replies View Related1. I have a 500 gb HD C and using a empty 2 TB external Drive, it gets to a point (different each time) stops and says nt enough space.
2. This stopping of backking up is annoying in itself. So I hit to restart back up and instead of it continuing whare it left of from the other BU it begins a whole new Bakup. This Time I have 2003 zipped files while the last 2 times I had like 316 on one and 988 on another.
Is this just win 7 and its back ups? I have 2 other programs I can use Nero back up and Mameo, should I reformat disk and try one o them?
I have a 500gb seagate external hard drive, and already used 240gb space. It worked fine until yesterday suddenly i could not access the files at all. I checked disk management, and it showed that my external drive became RAW drive. I tried to do chkdsk that I learned from one of the forum, and then it somehow has fixed the RAW drive back to FAT32. However I still cannot see any of my files. I opened command prompt, and typed in dir /a and it said 0 files 0 bytes, 4 DIR 288,714, 293, 248 bytes free. How can I bring my files back?? I don't want to lose my files.
View 4 Replies View RelatedI know about the immediate 'loss' of disk space owing to the two different methods of measurement. 1Tb to 931Gb - it's annoying, but I'm used to it.No, before a defrag by Fixbee I had 701Gb free, afterwards - in a matter of 2 hours - I had 537Gb. Obviously, I'm not going to use this product again, where a clean-up is obviosly a 'dirt up', but how do I undo the damage that it's caused - especially if it's not the only 'clean up' tool that might do this?
View 6 Replies View RelatedKeyboard laptop writes wrong letters for wrong keys
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedWell I had some RAM and it shown ONLY 2GB OF RAM. So went out and BOUGHT new RAM 4GB put it in then all i saw was 2GB! After doin' a bit of research I knew that the old RAM had 4GB (I got my computer tweaked so I didnt know) Is there a way to make this show or anything?
View 9 Replies View Relatedam having a problem with my computer and i can not find my dvd-rw icon when i open my computer.
View 1 Replies View Related24 GB RAM in the machine with 64 bit OS. but shows 3GB in the Windows. but shows 24GB in the BIOS
View 8 Replies View RelatedI received my laptop yesterday - Core i5, 4GB RAM, Windows 7 Professional 64-bit. I proceeded to install some apps from Microsoft and Adobe. Installation went fine and the apps started without problems. As soon as I saw the long list of fonts in Word, I wanted to remove as many of them as I possibly could. Brought up Fonts panel. Only 10 fonts - 10 ancient, bitmap fonts. What!? I saw and selected many fonts in Microsoft and Adobe apps. The fonts are indeed there, but they are simply not shown - no Segoe, no Cambria, no Corbel, no Constantia, not even Arial and Times New Roman, nothing.I got nervous and decided to restore Windows all the way back to the starting point.Today, I created the recovery DVDs from the factory partition. Rebooted from the DVDs to re-image C drive. Set up Windows and created my account. Windows 7 came up fresh. I went straight to the Fonts panel to check. Horror - the same 10 bitmap fonts, and nothing else.The factory-installed Windows 7 has problems showing fonts? What should I do now?
View 9 Replies View RelatedI have an HP Photosmart 5510 printer but in About:Config it shows three.The first is an old HP Deskjet we used to have which died and went to the skip. We were without a printer for a few months and then bought the HP Photosmart 5510 which I like. The third in the list is shown as a HP Photosmart 5510 (Network), obviously the same.The first needs removing, how do I do that please?The second is the current printer and is correct.I can account for the third entry. I've tried to set up a Home Group Network between PC and Netbook, without success, a suspect I may have changed the printer name for networking and perhaps gave it an IP No too.
View 3 Replies View Relatedmy windows7 cursor isn't shown nor working on a working on a webpage! why ?
View 2 Replies View RelatedI brought a new CPU yesterday Motherboard : GA-880GM-USB3 (gigabyte)CPU : AMD FX 8120Memory : 4+4 DDR3 RAM 1333MHzBIOS VERSION : GA-880GM-USB3 FE OS installed : I have both windows 7 x86 and x64 installed on the machine. But my problem is that when ever i run windows either of them, I can only see 6gb of ram and of which only 3.5 is useable in x64 and 2.8gb useable in x86. BUT when i installed CPUID's CPU-Z I can see that the whole 8gb of Ram is working, i.e., hardware is fine, but how do i get to see the whole ram and utilize it fully
View 9 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 32 bit
Processor: Intel(R) Celeron(R) CPU 550 @ 2.00GHz, x64 Family 6 Model 22 Stepping 1
Processor Count: 1
RAM: 2038 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 4 Mb
Hard Drives: C: Total - 63446 MB, Free - 19500 MB; D: Total - 10239 MB, Free - 5030 MB; F: Total - 105243 MB, Free - 81504 MB; G: Total - 99997 MB, Free - 23374 MB; P: Total - 99999 MB, Free - 95577 MB;
Motherboard: Dell Inc., 0U990C
Antivirus: Avira Desktop, Updated and Enabled
For a while now, I've had problems with USB devices, but today I was looking online and someone mentioned a solution to a problem I was having, saying to look in Device Manager under the Ports tree.My Ports tree in DM is gone, but I also don't know how to access my COM3 port or other ports any other way. Should the Ports tree be there? I've already restarted my computer and entered the BIOS menu, and it said my USB Ports were enabled.I've already been to the Registry Editor in Blah-Blah key and entered "3" (was already that way).My ports are just gone. What should I do?
I have noticed on my PC, netstat does not display TCP ports, only UDP ports are shown. I have searched online for this issue but couldn't find anything useful.I'm running win7 x64 ultimate.
View 3 Replies View RelatedI have a 120Gig USB drive that plugs into my pc (Win 7) and works fine. I gave it to a friend as it is surplus to requirement, but when i plugged it into there laptop which has also has Win 7 on, the light on the drive lights up but it doesn't actually connect.
View 9 Replies View RelatedI have a new samsong nett book. can anyone advise . win 7 op system it will not show minimised page in task bar
View 3 Replies View RelatedI run an accounting program called PASTEL ACCOUNTING which generates emails that are sent to OUTLOOK 2010's outbox. i can see them in the outbox and they are subsequently sent correctly. i know this because they are received correctly by the recipient. However once the mail has left the Outbox it is not stored in the SENT folder and i therefore have no record of its existence! PASTEL tell me that since it has found its way into OUTLOOK it must be an OUTLOOK problem! i have a feeling MS will tell me its a PASTEL problem..
View 2 Replies View RelatedOk i have a Seagate freeagent pro 500g external HDD. Was running usb but new MB has esata so i wanted to give it a go. Well not so easy as i thought.
If esata drive is hooked to port when computer loads ,Bios sees the drive but wont get past the windows load screen.
Unpluged from port and windows loads fine. So i plug it in and windows makes the normal noise but nuthing shows up. Wait 7 mins a drive apears but will always cause page to stop responding. Usb still works fine jus rather esata due to larg files
My laptop is connected to a router (DLink DSL 524T) via network cable. Although I could still connect to the net through the router there is a cross shown between the Network and Internet in the Networks and Sharing Center.
This isn't a big deal (since I connect to the Internet) but I was wondering why the cross is there? Is there a way I could get it off?
P.S. - I've attached a screen-shot of the network and sharing center in case my explanation was a bit confusing
In the right pane for Network on Windows Explorer there shows Media Devices. How can I get rid of these icons?
View 2 Replies View RelatedIn XP the individual files that were in folders did not show in my main list. But in Windows 7 they do. How can I not show all those files that are in folders?
View 4 Replies View RelatedI have put some staff on my usb and now I am trying to open then on another computer but they turn out as shortcuts, what should i do??
View 2 Replies View RelatedI just allocated more space to my system restore to ensure that when i back up files/docs there will be sufficient space. But does the allocated space for system restore affect at all how much space is allocated for backup? If not, i will would like to turn back down the allocated space for the restore.
Windows 7 Home Premium 64 bit
Service Pack 1
Computer is ASUS laptop
4 gb of ram
64 bit system
my WD Passport essential 500 gb have three parition who is shown in mac leopard but when i switch windows 7 then only one part show and other 2 part dont show. where as part 1 and 3 are NTFS and part 2 FAT32 and these part also visibale in device in computer management. please help friends
View 2 Replies View RelatedI try to use the Windows diagnostic tools etc, system restore, command prompt, memory test and when I choose say system restore, no text is shown in the dialogue box. Again no text is shown in other dialogue boxes that pop up.
View 1 Replies View Related
