I use Karen's Replicator to back up all the folders under my user name but have tried to no avail to exclude appdata including adding the appdata wildcard in Global Exclusions. I suppose there may be other backup utilities I could use but a Google search shows others with the same problem. I'd like to save the 10GB in disk space.
View 4 RepliesI've searched and I couldn't come up with anything(probably using the incorrect keywords in my search).I was wondering if there was a way to make a backup of my computer while excluding certain folders.For example: I want to back up my computer but exclude my music folder cause it's too large for the drive I want to place the back up on and, well, it's not exactly vital. I won't die from not having my music.
View 6 Replies View RelatedCouple a days ago my hp laptop system crash many times, I decided to make a backup to make a clean installation of the operation system, the backup was done with a bridge cable, and is in inside of another internal hdd of a laptop but I am not able to recover the data. All data is there, I connected the hdd where the backup is directly from the motherboard cable and run ubuntu without an installation and all my files are inside, how I can recover my data in this situation? Also when the backup hdd is connected with the bridge appeared in my computer but I am no have accesss to it, it does not say the data weight but say local disk with the letter of the drive.
View 1 Replies View RelatedI know how to clone my entire system by going to Control Panel, Backup and Restore, and Create a System Image, but this ostensibly creates a duplicate of OS state, and the entire drive, data and all (for me around 500 GB).I also know how to just backup data alone, but what I don't know how to do is backup just the OS and all installations (separate from raw, individual data and media files), so in the event of disk failure, I can simply reload the old system and programs (but not media files).
View 3 Replies View RelatedI have backup DVD that contains data and pictures that I would like to transfer into a new computer. What steps should I take. I have W7 and use Mozilla Firefox or IE. I have never worked with a hard drive and don't want to screw it up.
View 1 Replies View RelatedGot a new PC (Windows 7 Home Premium 64bit) with a 1TB drive. I added an extra internal drive which happens to be one of my old 300GB XP drives (231GB free). There are some apps on the old drive (Photoshop 6.0) which still run & I'd like to use them. Can I run Windows Backup and create an image on the old drive even though there are 70GB's of apps & files on there already?? Does the backup wizard partition or format the selected drive in the process of backing up? Obviously I'd like to keep accessing that stuff if I can.
View 3 Replies View Relatedwhen Windows 7 comes out retail I want to install it. do not want to have to manually install every program n file currently on my vista 64 bit system. what is a good way to save my current setup so I can just reinstall it to the new Windows 7 system? I have an external HD 500gb I can use. searched the files here for information perhaps i am not using the correct search terms n phrases.
I know before I back up current vista I need to purge it n slim down the files n programs lol.
I wondering if anyone can help answer a problem I am experiencing with using Windows 7 own backup tool.
I have two 500GB hard drives in my system. Drive 0 is partitioned with 390 GB as the C: drive containing Windows 7 and user data, the remaining space is unallocated ready for me to install Ubuntu 9.10. Drive 1, as D:, is the full 465.8GB and is planned to store backups. Before my initial backup this drive was empty.
In the past I've used Acronis to backup, but my version is old and before purchasing the latest version I thought I would try Windows own backup as I have got the impression that it's pretty good.
However, backing up my C: to D: takes up more space than I expected it too.
C:
Size: 390GB
Used: 185GB
Free: 205GB
D: after initial backup (drive empty before then)
Size: 465.76GB
Used: 320.01GB
Free: 145.75GB
Is there something I doing wrong? or is there a reason why it is nearly twice the size? I chose the recommend option and let Windows decide what to backup, was that the wrong decision?
If it helps these are the three files/folders I see at the root of D:
MediaID.bin, WindowsImageBackup and LIANLI-QUAD (my computer name)
Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
Is the error that I am receiving on my PC and it is a Toshiba P505 S8980 and it requires me to press F! at start up to use the pc cause it says the PC has Identified an error with the HDD (Hard Drive) and the SMART system suggest to partner with my manufature to fix the issue. I have ran several test with a tune up tool and it says that my P.C. is operating correctly and it is running just fine but the error will not go away and I am starting to worry that the Hard Drive is failing because of this message.
It is still under warranty and I have contact Toshiba and they want me to send it back to fix the issue but I don't want to have to start all over again by reinstalling all my programs etc... I have them all back up on an external hard drive but it is difficult to reload everything. If I have to do it I will but my computer will not let me reset to factory settings either and I am lost on this one.
I manage a large array of disks and rely on Robocopy via batch files to backup only changed data. This has served me well for a year or so now. However, last week I had a drive go flakey. For some reason all of the folders on the drive beginning with letters K through Z got trashed. Since no one realized this the backup script ran on schedule and promptly deleted all folders on my backup drive beginning with letters K through Z.
I've used a couple of backup programs in the past and I'm fairly sure this issue is not adressed.
drives partially failed and deleted all folders beginning with letters K through Z. When my backup script ran it deleted all of the same folders on the backup drive. I received a reply from a user (don't have access to the name right now) who suggested a freeware sync package which most likely would work. However, company policy states that no freeware is to be run on our systems. While I could probably get away with it a question comes to mind - Why isn't this a standard feature in commercially available backup software. There must be a name for this type of option. Does anyone know of a commercially available package and / or what this feature might be called? I can't be the only person who has run into this problem.
View 6 Replies View RelatedMy computer (Win 7 Pro 64 bit) recently crashed hard during a Windows Update, probably during Win 7 SP1 installation but I have no way of being sure. I have daily backups on a WHS system and I reverted to a version known to be good prior to the crash. Unfortunately, there were some changes made to some user files between the early AM backup and the next day's crash. The data should be recoverable (there is another WHS backup that was completed while Windows update was installing that should have the user data but I'm afraid to try using it for a full restore because I don't know what other changes were going on in the OS)
I can recover all of the files from my Documents folder in Win 7 easily enough ... but is there a way to recover the files from the XP Virtual Machine's folders?
I'm tempted to copy the XP Virtual Drive from the WHS volume and write over the XP virtual drive on the restored PC but I have not found any information about doing so and I don't want to trash things to the point where I have to do yet another restore. I have to admit that I had not considered a backup strategy for the XP Mode VM until this happened.
When I turn on my laptop it says:
"SMART Failure Predicted on Hard Disk 0: TOSHIBA MK3017GAS-(PM). WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue".
And then when I push F1 it just have a blank screen.
I have a Acer Laptop with windows 7 premium 64bit installed on it. Recently, when I start the laptop, it shows the error message: Smart Failure Predicted on Hard Disk 0: WD5000BEVT-22A0RT0-(S1)
Warning: Immediately back-up your data and replace your hard disk drive. Press F1 to continue.
After pressing F1, windows failed to boot and it stuck at black screen there. I decided to format the laptop.ok,this time my windows booted smoothly. But the problem is,the same warning came out once I start the laptop. After pressing F1, every thing works fine. This laptop is still under warranty period.
How to Enable or Disable to Backup Data Files in Windows 7 ?
View 0 Replies View RelatedI want to backup my PC's data files to an external HD using Windows 7 backup & restore utility. If I use the recommended default option that also includes a back mirror of Windows 7 will the PC automatically backup only New data since the backup at the scheduled option chosen? Will the backed up files on the backup drive appear as windows file folders (My Pictures, My Documents etc.) or be in an encoded file format?
View 1 Replies View RelatedI'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working
View 2 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedSo I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
View 4 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
View 13 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View Relatedjust did a fresh install of Windows 7 Ultimate on my second pc, all went well apart from it gets to amd data change update new data to dmi then..... stops, it wont budge, i haven't touched anything in the bios or added any new hardwear.When i reboot, same again, went into the bios and made sure i have it set to boot from hard drive first.
View 6 Replies View Relatedforum i have a question. I have a kingston 30 gb ssd i use as my windows drive, and a 750 gb wd hdd for data/game storage. I have heard that you can ghost a file on the data drive into the x86 folder so that all new installs go there and then you still recieve most of the benefits of your ssd w/o clogging it up. I have an amd based system (dont know if that matters or not)
View 1 Replies View RelatedIs there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.
View 2 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View Related