I wondering if anyone can help answer a problem I am experiencing with using Windows 7 own backup tool.
I have two 500GB hard drives in my system. Drive 0 is partitioned with 390 GB as the C: drive containing Windows 7 and user data, the remaining space is unallocated ready for me to install Ubuntu 9.10. Drive 1, as D:, is the full 465.8GB and is planned to store backups. Before my initial backup this drive was empty.
In the past I've used Acronis to backup, but my version is old and before purchasing the latest version I thought I would try Windows own backup as I have got the impression that it's pretty good.
However, backing up my C: to D: takes up more space than I expected it too.
C:
Size: 390GB
Used: 185GB
Free: 205GB
D: after initial backup (drive empty before then)
Size: 465.76GB
Used: 320.01GB
Free: 145.75GB
Is there something I doing wrong? or is there a reason why it is nearly twice the size? I chose the recommend option and let Windows decide what to backup, was that the wrong decision?
If it helps these are the three files/folders I see at the root of D:
MediaID.bin, WindowsImageBackup and LIANLI-QUAD (my computer name)
I have a new HP 6200 small form factor that came pre-installed with Windows 7 64bit. I installed our corporate copy of MS Office Pro 2003 and then installed UPS Worldship 2011, which requires an ODBC to connect to our Access database.When I go into the ODBC to set up the connection under System DSN, it's completely blank. No Access DSN, no Excel DSN, completely blank. If I try to ADD a DSN the only options shown are SQL DSNs which I can not use.Initially, I called UPS Worldship Support. They referred me to Microsoft. After nearly 2 hrs on the phone with MS, they told me to call HP since HP preinstalled the Windows 7 and they handle anysoftware/warranty issues.So, I called HP. Their support is the pits. Nobody I talked with even knew what a DSN is (they kept telling me it was DNS not DSN and they are 2 different things!!).
I have tried to backup using the windows 7 backup program. I am choosing a remote western digital bookshelf hard drive. It has 150 gigabyte of space with nothing on it. I have had no success and keep getting a message that my backup source does not have enough memory. Any ideas?
Couple a days ago my hp laptop system crash many times, I decided to make a backup to make a clean installation of the operation system, the backup was done with a bridge cable, and is in inside of another internal hdd of a laptop but I am not able to recover the data. All data is there, I connected the hdd where the backup is directly from the motherboard cable and run ubuntu without an installation and all my files are inside, how I can recover my data in this situation? Also when the backup hdd is connected with the bridge appeared in my computer but I am no have accesss to it, it does not say the data weight but say local disk with the letter of the drive.
I use Karen's Replicator to back up all the folders under my user name but have tried to no avail to exclude appdata including adding the appdata wildcard in Global Exclusions. I suppose there may be other backup utilities I could use but a Google search shows others with the same problem. I'd like to save the 10GB in disk space.
I know how to clone my entire system by going to Control Panel, Backup and Restore, and Create a System Image, but this ostensibly creates a duplicate of OS state, and the entire drive, data and all (for me around 500 GB).I also know how to just backup data alone, but what I don't know how to do is backup just the OS and all installations (separate from raw, individual data and media files), so in the event of disk failure, I can simply reload the old system and programs (but not media files).
I have backup DVD that contains data and pictures that I would like to transfer into a new computer. What steps should I take. I have W7 and use Mozilla Firefox or IE. I have never worked with a hard drive and don't want to screw it up.
Got a new PC (Windows 7 Home Premium 64bit) with a 1TB drive. I added an extra internal drive which happens to be one of my old 300GB XP drives (231GB free). There are some apps on the old drive (Photoshop 6.0) which still run & I'd like to use them. Can I run Windows Backup and create an image on the old drive even though there are 70GB's of apps & files on there already?? Does the backup wizard partition or format the selected drive in the process of backing up? Obviously I'd like to keep accessing that stuff if I can.
when Windows 7 comes out retail I want to install it. do not want to have to manually install every program n file currently on my vista 64 bit system. what is a good way to save my current setup so I can just reinstall it to the new Windows 7 system? I have an external HD 500gb I can use. searched the files here for information perhaps i am not using the correct search terms n phrases.
I know before I back up current vista I need to purge it n slim down the files n programs lol.
Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
Is the error that I am receiving on my PC and it is a Toshiba P505 S8980 and it requires me to press F! at start up to use the pc cause it says the PC has Identified an error with the HDD (Hard Drive) and the SMART system suggest to partner with my manufature to fix the issue. I have ran several test with a tune up tool and it says that my P.C. is operating correctly and it is running just fine but the error will not go away and I am starting to worry that the Hard Drive is failing because of this message.
It is still under warranty and I have contact Toshiba and they want me to send it back to fix the issue but I don't want to have to start all over again by reinstalling all my programs etc... I have them all back up on an external hard drive but it is difficult to reload everything. If I have to do it I will but my computer will not let me reset to factory settings either and I am lost on this one.
I manage a large array of disks and rely on Robocopy via batch files to backup only changed data. This has served me well for a year or so now. However, last week I had a drive go flakey. For some reason all of the folders on the drive beginning with letters K through Z got trashed. Since no one realized this the backup script ran on schedule and promptly deleted all folders on my backup drive beginning with letters K through Z.
I've used a couple of backup programs in the past and I'm fairly sure this issue is not adressed.
drives partially failed and deleted all folders beginning with letters K through Z. When my backup script ran it deleted all of the same folders on the backup drive. I received a reply from a user (don't have access to the name right now) who suggested a freeware sync package which most likely would work. However, company policy states that no freeware is to be run on our systems. While I could probably get away with it a question comes to mind - Why isn't this a standard feature in commercially available backup software. There must be a name for this type of option. Does anyone know of a commercially available package and / or what this feature might be called? I can't be the only person who has run into this problem.
My computer (Win 7 Pro 64 bit) recently crashed hard during a Windows Update, probably during Win 7 SP1 installation but I have no way of being sure. I have daily backups on a WHS system and I reverted to a version known to be good prior to the crash. Unfortunately, there were some changes made to some user files between the early AM backup and the next day's crash. The data should be recoverable (there is another WHS backup that was completed while Windows update was installing that should have the user data but I'm afraid to try using it for a full restore because I don't know what other changes were going on in the OS)
I can recover all of the files from my Documents folder in Win 7 easily enough ... but is there a way to recover the files from the XP Virtual Machine's folders?
I'm tempted to copy the XP Virtual Drive from the WHS volume and write over the XP virtual drive on the restored PC but I have not found any information about doing so and I don't want to trash things to the point where I have to do yet another restore. I have to admit that I had not considered a backup strategy for the XP Mode VM until this happened.
When I turn on my laptop it says: "SMART Failure Predicted on Hard Disk 0: TOSHIBA MK3017GAS-(PM). WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue". And then when I push F1 it just have a blank screen.
I have a Acer Laptop with windows 7 premium 64bit installed on it. Recently, when I start the laptop, it shows the error message: Smart Failure Predicted on Hard Disk 0: WD5000BEVT-22A0RT0-(S1)
Warning: Immediately back-up your data and replace your hard disk drive. Press F1 to continue.
After pressing F1, windows failed to boot and it stuck at black screen there. I decided to format the laptop.ok,this time my windows booted smoothly. But the problem is,the same warning came out once I start the laptop. After pressing F1, every thing works fine. This laptop is still under warranty period.
I want to backup my PC's data files to an external HD using Windows 7 backup & restore utility. If I use the recommended default option that also includes a back mirror of Windows 7 will the PC automatically backup only New data since the backup at the scheduled option chosen? Will the backed up files on the backup drive appear as windows file folders (My Pictures, My Documents etc.) or be in an encoded file format?
I'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working
I know this is not very important in the grand scheme of things, but it irritates the crap out of me. When the player is in "Now Playing" mode, using the album art visualization, is it possible to make the album art bigger? When in full screen mode the album art is but a tiny postage stamp on the desktop. I would like to make it larger so it's easier to see. Is there a way to enlarge it, or did the programmers in Redmond not think there would ever be a need to actually be able to see and enjoy the album art?
I have recently bought a new computer, pre-loaded with windows 7. I hate it! It seems to me the most stupid retrograde step Microsoft has ever made. After the simplicity of Win XP Microsoft seems to have taken steps to hide everything they can and make it as difficult as possible for the user to comprehend it and....;. Why oh why have they made everything so small. I usually sit about 500mm from the monitor. Now I am getting a stiff neck peering closely to read simple print. Is there any way I can make it all bigger, as I can with Word and I.e?
how I could make the icons on the taskbar bigger.. the only option under 'right click' -> 'properties' is to make them smaller.. the other option under "Control Panel -> Appearance and Personalization -> Display" makes everything big..
I have recently purchased a larger drive than my existing 300gb unit, which I would like to move to a new build.
I have tried to restore the disk image to my larger drive but the recovery disk cleverly assigns the 300gb drive as the drive to install on.
Is there some simple way in which I can tell the disk image to install onto the bigger hdd without having to do a clean install, which I was holding back till SP1 came out?
sometimes, all of a sudden my mouse cursor gets bigger, like, twice the size. it doesn't look pixelated or edgy. it just doubles in sizes. my current work around is to go to "change how mouse pointer looks" select the aero_arrow file and hit apply. then the mouse is cursor is back to normal.
How do I make the page on WORD get smaller? I was using the laptop mouse touchpad and all of a sudden the page went to about 250 percent. This si not my laptop and I'm not familiar with it - I can't seem to find any way to get the page back to a 100 percent view.
I have enlarged my font size in windows live mail, but if I copy and paste a passage into an e-mail it comes in small. what do I have to adjust to get a bigger size in copy/paste
I have a netbook with a 10.1 inch screen, and a 22inch LCD display panel. When I connect my netbook to the display, the words seem too small at 1920x1080 resolution. If I set the font size to 125% or 150%, then it would be too big once i unplug my external LCD and use the netbook's 10.1 screen. Setting the 22 LCD to a lower resolution makes the text look very blurred, so that's not an option.
Is there anyway/script/program to automatically change the font size when I connect/disconnect the LCD screen?
