PC Has Identified Error With HDD - Backup Data

May 14, 2010

Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.

Is the error that I am receiving on my PC and it is a Toshiba P505 S8980 and it requires me to press F! at start up to use the pc cause it says the PC has Identified an error with the HDD (Hard Drive) and the SMART system suggest to partner with my manufature to fix the issue. I have ran several test with a tune up tool and it says that my P.C. is operating correctly and it is running just fine but the error will not go away and I am starting to worry that the Hard Drive is failing because of this message.

It is still under warranty and I have contact Toshiba and they want me to send it back to fix the issue but I don't want to have to start all over again by reinstalling all my programs etc... I have them all back up on an external hard drive but it is difficult to reload everything. If I have to do it I will but my computer will not let me reset to factory settings either and I am lost on this one.

View 3 Replies


ADVERTISEMENT

Cannot Recover Data From Backup HDD

Apr 13, 2012

Couple a days ago my hp laptop system crash many times, I decided to make a backup to make a clean installation of the operation system, the backup was done with a bridge cable, and is in inside of another internal hdd of a laptop but I am not able to recover the data. All data is there, I connected the hdd where the backup is directly from the motherboard cable and run ubuntu without an installation and all my files are inside, how I can recover my data in this situation? Also when the backup hdd is connected with the bridge appeared in my computer but I am no have accesss to it, it does not say the data weight but say local disk with the letter of the drive.

View 1 Replies View Related

Excluding App Data From Backup

Dec 20, 2011

I use Karen's Replicator to back up all the folders under my user name but have tried to no avail to exclude appdata including adding the appdata wildcard in Global Exclusions. I suppose there may be other backup utilities I could use but a Google search shows others with the same problem. I'd like to save the 10GB in disk space.

View 4 Replies View Related

Backup Just OS And Programs But Not Data?

Aug 2, 2011

I know how to clone my entire system by going to Control Panel, Backup and Restore, and Create a System Image, but this ostensibly creates a duplicate of OS state, and the entire drive, data and all (for me around 500 GB).I also know how to just backup data alone, but what I don't know how to do is backup just the OS and all installations (separate from raw, individual data and media files), so in the event of disk failure, I can simply reload the old system and programs (but not media files).

View 3 Replies View Related

Transfer Backup Data To New Computer?

Jan 29, 2011

I have backup DVD that contains data and pictures that I would like to transfer into a new computer. What steps should I take. I have W7 and use Mozilla Firefox or IE. I have never worked with a hard drive and don't want to screw it up.

View 1 Replies View Related

Windows Backup To Drive With Data Already On It?

Aug 14, 2012

Got a new PC (Windows 7 Home Premium 64bit) with a 1TB drive. I added an extra internal drive which happens to be one of my old 300GB XP drives (231GB free). There are some apps on the old drive (Photoshop 6.0) which still run & I'd like to use them. Can I run Windows Backup and create an image on the old drive even though there are 70GB's of apps & files on there already?? Does the backup wizard partition or format the selected drive in the process of backing up? Obviously I'd like to keep accessing that stuff if I can.

View 3 Replies View Related

Backup Data Before Win 7 Clean Install

Aug 30, 2009

when Windows 7 comes out retail I want to install it. do not want to have to manually install every program n file currently on my vista 64 bit system. what is a good way to save my current setup so I can just reinstall it to the new Windows 7 system? I have an external HD 500gb I can use. searched the files here for information perhaps i am not using the correct search terms n phrases.

I know before I back up current vista I need to purge it n slim down the files n programs lol.

View 8 Replies View Related

Backup Data Bigger Than Its Source

Oct 30, 2009

I wondering if anyone can help answer a problem I am experiencing with using Windows 7 own backup tool.

I have two 500GB hard drives in my system. Drive 0 is partitioned with 390 GB as the C: drive containing Windows 7 and user data, the remaining space is unallocated ready for me to install Ubuntu 9.10. Drive 1, as D:, is the full 465.8GB and is planned to store backups. Before my initial backup this drive was empty.

In the past I've used Acronis to backup, but my version is old and before purchasing the latest version I thought I would try Windows own backup as I have got the impression that it's pretty good.

However, backing up my C: to D: takes up more space than I expected it too.

C:

Size: 390GB

Used: 185GB

Free: 205GB

D: after initial backup (drive empty before then)

Size: 465.76GB

Used: 320.01GB

Free: 145.75GB

Is there something I doing wrong? or is there a reason why it is nearly twice the size? I chose the recommend option and let Windows decide what to backup, was that the wrong decision?

If it helps these are the three files/folders I see at the root of D:

MediaID.bin, WindowsImageBackup and LIANLI-QUAD (my computer name)

View 6 Replies View Related

Failing Disk Deletes Backup Data?

May 31, 2012

I manage a large array of disks and rely on Robocopy via batch files to backup only changed data. This has served me well for a year or so now. However, last week I had a drive go flakey. For some reason all of the folders on the drive beginning with letters K through Z got trashed. Since no one realized this the backup script ran on schedule and promptly deleted all folders on my backup drive beginning with letters K through Z.

I've used a couple of backup programs in the past and I'm fairly sure this issue is not adressed.

View 3 Replies View Related

Failing Disk Deletes Backup Data?

Jun 1, 2012

drives partially failed and deleted all folders beginning with letters K through Z. When my backup script ran it deleted all of the same folders on the backup drive. I received a reply from a user (don't have access to the name right now) who suggested a freeware sync package which most likely would work. However, company policy states that no freeware is to be run on our systems. While I could probably get away with it a question comes to mind - Why isn't this a standard feature in commercially available backup software. There must be a name for this type of option. Does anyone know of a commercially available package and / or what this feature might be called? I can't be the only person who has run into this problem.

View 6 Replies View Related

Accessing Data Inside A Backup Volume Holding XP VM

May 13, 2011

My computer (Win 7 Pro 64 bit) recently crashed hard during a Windows Update, probably during Win 7 SP1 installation but I have no way of being sure. I have daily backups on a WHS system and I reverted to a version known to be good prior to the crash. Unfortunately, there were some changes made to some user files between the early AM backup and the next day's crash. The data should be recoverable (there is another WHS backup that was completed while Windows update was installing that should have the user data but I'm afraid to try using it for a full restore because I don't know what other changes were going on in the OS)

I can recover all of the files from my Documents folder in Win 7 easily enough ... but is there a way to recover the files from the XP Virtual Machine's folders?

I'm tempted to copy the XP Virtual Drive from the WHS volume and write over the XP virtual drive on the restored PC but I have not found any information about doing so and I don't want to trash things to the point where I have to do yet another restore. I have to admit that I had not considered a backup strategy for the XP Mode VM until this happened.

View 1 Replies View Related

SMART Failure Predicted On Hard Disk 0 - Backup Data

Jul 29, 2011

When I turn on my laptop it says:
"SMART Failure Predicted on Hard Disk 0: TOSHIBA MK3017GAS-(PM). WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue".
And then when I push F1 it just have a blank screen.

View 9 Replies View Related

Immediately Backup Data And Replace Hard Disk Drive

Jul 25, 2012

I have a Acer Laptop with windows 7 premium 64bit installed on it. Recently, when I start the laptop, it shows the error message: Smart Failure Predicted on Hard Disk 0: WD5000BEVT-22A0RT0-(S1)

Warning: Immediately back-up your data and replace your hard disk drive. Press F1 to continue.

After pressing F1, windows failed to boot and it stuck at black screen there. I decided to format the laptop.ok,this time my windows booted smoothly. But the problem is,the same warning came out once I start the laptop. After pressing F1, every thing works fine. This laptop is still under warranty period.

View 8 Replies View Related

Backup User And System Data Files - Enable Or Disable

Mar 19, 2009

How to Enable or Disable to Backup Data Files in Windows 7 ?

View 0 Replies View Related

Windows 7 Backup And Restore Utility - Will Data Appear In Encoded File Format?

Jan 4, 2013

I want to backup my PC's data files to an external HD using Windows 7 backup & restore utility. If I use the recommended default option that also includes a back mirror of Windows 7 will the PC automatically backup only New data since the backup at the scheduled option chosen? Will the backed up files on the backup drive appear as windows file folders (My Pictures, My Documents etc.) or be in an encoded file format?

View 1 Replies View Related

Changing Primary Harddisk, Two Raid1 Backup Data Drives Affected?

Jan 6, 2012

I'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working

View 2 Replies View Related

Backup Data (or An System Image) To An Internal And External Hard Drives At Same Time?

Jun 29, 2012

can u backup your data (or an system image)to an internal and external hard drives at the same time?

View 1 Replies View Related

No HDD Has Been Identified In System

Jun 25, 2012

i got the error A disk error has occurred Press Ctrl+Alt+Del to restart and i get an infinite loop. So i googled around and saw someone said use HDD diagnostic, i used Ultimate Boot CD followed his steps and it says: No Hard Disk Drive has been identified in your system. The following are the possible causes: - HDD POWER CABLE IS NOT PROPERLY ATTACHED TO THE HDD (After turning off the power to the system, please check the HDD power cable.) - HDD INTERFACE CABLE IS NOT PROPERLY ATTACHED TO THE HDD (After turning off the power to the system, please check the HDD interface cable.) - HDD MASTER-SLAVE SETTING IS INCORRECT (After turning off the power to the system, please confirm the appropriate jumper setting for the HDD. power down your PC system, check the above items, and then restart the program. If after checking the possible causes, the problem still persists, it is possible that the HDD itself is faulty.

Heres how it got to that.

1) Laptop crashed.
2) Went to do clean install of Windows 7 off USB (Its the right version with SP1 dont worry)
3) Got stuck at 13%
4) Stupid me turned it off
5) Get error "A disk read error has occured"
6) Got diagnostic report right up there^

[URL]

View 9 Replies View Related

Backup Error - Backup Was Not Successful

Aug 3, 2009

Does anyone know what would cause the following backup error?

The backup was not successful. The error is: Windows Backup encountered a problem while determining additional locations of one of the users included in backup. (0x81000038).

View 6 Replies View Related

Total Identified Windows 7 Installations: 0?

Feb 19, 2011

one day it just shut down and would not startup any more, it goes straight to startup repair and fails and loops this. i have fixed this issue before, with bootrec tools on the 7 CD, but this time it wont do anything, no matter what i try it tells me "total identified windows installations: 0"does anyone know what to do, other than a fresh install, since i have hundreds of gbs of music and movies not recently backed up, and lots of work on the drive i cannot lose.

View 1 Replies View Related

Steelseries Siberia V2 Usb Sound Card Not Identified

Apr 4, 2012

I made a major upgrade yesterday (from a 6-7 year old mobo and processor to a Asus p8z68-v gen 3 and and i5 2500k) and i had to install a fresh copy of windows 7 (32bit). Windows does not recognize my steelseries usb sound card and shows it as a "USB PnP Sound Device" in the device manager. I have not had much time to test it, but so far i did not have any major problem with sound (microphone works fine too) except that it might be a little low quality? What bugs me is that this sound card was properly recognized in my old computer and i do not remember putting much effort into it back then. This computer has no problem identifying my mouse (logitech g3) and my DVD-drive. Also, I am only using the usb ports on the back of the PC (the ones that sit directly on the mobo).

View 4 Replies View Related

How Machine In Sleep / Hibernate Mode Identified On Network

May 4, 2012

How a machine Windows 7 or XP once goes to sleep/hibernate mode, can be identified on the network to do a Wake-On-LAN. Because the machine is shutdown, the ping does not give a response. In a DHCP environment, when the machine goes to sleep mode, the ip is released so not necessarily the machine can be identified with its IP.

View 2 Replies View Related

Windows Backup "The Backup Failed." Error

Feb 26, 2012

I have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.

View 9 Replies View Related

Backing Up Data Error "The Request Is Not Supported" Error 0x80070032

Oct 10, 2012

I have been trying to back up all my important data onto an external hdd. The external hdd i am using is a WD 2tb. I am currently running Win 7 x64 with 2 x hdd wd 2tb set-up in raid 1 for hdd failure. I would like the external one as a backup weekly in case of file corruption. However when i go into setup, i get the following msg "The request is not supported" Error 0x80070032. I have read through a few threads on this forum with regards to task scheduler and event log they all seem to be set as required. There is also suggestion that win 7 may not be able to handle large hdd sector size, something about 4k versus 512.

View 2 Replies View Related

Kernel Data Inpage Error

Oct 10, 2011

my laptop has been crashing frequently since months ago. sometimes i get bluescreen (kernel data inpage error), sometimes it reboots automatically, and sometimes it freezes and the screen is filled with some grey/black weird horizontal lines and i have to reboot it. i had reinstalled the windows a few times but the prob remains.when i run in safe mode everything is fine.also, everything is ok when i use battery, no reboot, bluescreen, etc...but the prob comes back once i plug in...seems like the prob only occurs when i use the power?

View 2 Replies View Related

Kernel Data Inpage Error

Jul 18, 2012

my system has been running absolutely fine for the past year without issues until about 3 weeks ago. For the first time, I got a stop error about kernel data inpage error. it however could not save the dump for some reason.

my system is configured as SSD is the main boot drive for Windows and everything else (program files etc...) is redirected to the E: drive which is my RAID0. I then had the same problem about 2 weeks ago. And now I have just seen it happen properly:

Kernel data inpage error
0x0000007A
NTFS.sys

is what are the key information I can see. what does this mean? how can I identify what is exactly the problem? this is such a critical system, i cannot emphasis enough

View 3 Replies View Related

Outlook Data File Error

Aug 18, 2009

I have another issue regarding Office Outlook 2007 and Windows 7 RC (Build 7100). When I open up Outlook sometime (pretty frequently lately).

I get a message telling me that the data file was not closed properly last time it was opened and a check is now is progress (whoo-hoo).

I am happy for it to check the file to make sure that there is no problem with it but doing it every single time I open Outlook for the days work ahead (gimme a break).

There was a thread that I came across on here that Ian had posted about disabling the iTunes Add-On in the Trust Center. But I have tried this to no avail.

Does anyone have any suggestions?

View 3 Replies View Related

BSOD - Kernel Data Inpage Error

Apr 20, 2011

I have a samsung laptop RV411. So I closed the cover and then opened it for transfer. However, I did not shut it down. So when I opened it, it turned black and it turned BSOD. It says KERNEL_DATA_INPAGE_ERROR. So I restarted my PC. Now, I cant get out of the POST. There is 2 available options F2 for setup and F4 for recovery. I pressed both and it went Please Wait... Forever! I used the recovery disk no luck.

View 10 Replies View Related

[BSOD] Kernal Data Inpage Error?

Sep 7, 2012

I get this BSOD whenever I leave my computer for 5-10 minutes, It just started happening.I have done CHKDSK and it came up with no errors. I don't know what info you need, I am attaching the files necessary.

View 1 Replies View Related

Kernel Data Inpage Error At Startup?

Nov 23, 2011

I had some BSOD's, they always occured shortly after the login screen appeared. I hoped they would go away, like they did in the past, but my PC kept crashing. I didn't try to solve them, I just booted in another OS, now I booted my windows 7 again and the problem seems solved, but I am curious what was the cause of these BSOD's and I want to know how I can prevent them in the future. I attached a zip file as outlined

View 9 Replies View Related

Kernel Data Inpage Error NTFS.sys

Nov 28, 2011

When I re�nstalled windows around 1-2 months ago I suddenly got a Kernel Data inpage error. In the attachments are all the files you will need (minidump and system health report). I had to re�nstall windows because there was an unremovable virus, before the re�stallation this problem didn't occur so that gives me a high suspicion of it being a driver problem but I can't find any drivers that need updating.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved