ERROR 1320, The Specified Path Is Too Long

Apr 14, 2011

ERROR 1320, The specified path is too long

WINDOWS 7 HOME PREMIUM - 64 BITS
4GB RAM / 500GB HD / i5

Find Out Which Of Files Path Names Were Too Long?

Aug 13, 2011

How can I find out which of my files path names were too long?I'm backing up my files from one external drive to another (just dragged a giant folder over and waited over a day for it to paste the entire thing), now I come to read "The file name(s) would be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path." The destination folder saimply reads "CD2", which could literally be anything. What's the entire path?I've got Windows 7.So I'd gladly shorten whatever path(s) and try again, but how do I read entire path of which files were too long to be in which destination folder?Don't know what to do, the window is still popped up that has the option of either "Skip" or "cancel" along which a check box at the bottom that reads "do this for all current items (11 found)", I haven't clicked anything yet.

View 1 Replies View Related

Windows 7 - Destination Path Too Long When Copying

Nov 6, 2012

Destination Path Too Long when Copying I copied my data folders/files from my winXP C-drive to my external hard-drive & then to my new win7 C-drive. After about 20-25 minutes of copying (with 5 seconds remaining) ... I got the attached message ... (2 found) ... I clicked Skip ... same message again (1 found) ... I clicked Skip ... same message again (0 found) ... I clicked Skip. "You can shorten the file name and try again, or try a location that has a shorter path." I compared the "JAR Control Panel Buttons" source & destination folders & found 3 files that were not copied. Not knowing how much too long the paths were, I guessed & they copied OK with shortened names.

View 1 Replies View Related

Source Path Too Long - Can't Delete Folder

Mar 4, 2010

I just upgraded from Vista to Windows 7 last weekend and I must say its been a really bad decision, Win7 is not so much of an improvement to me. We always think the grass is greener. The other idiot thing I did or didn't do was not back up so I could roll back to Vista so I am stuck with this now and I really hate it.

My issue (1 of many) is I can't delete a folder, I am guessing its some residual from Vista its 'My Documents' but inside it is an endless list of empty folders 'My Documents/My Music/My Documents/My Music/My Documents/My Music/My Documents/My Music...etc.

When I try to delete I get this message... "The source file names are larger than is supported by the file system. Try moving to a location which has a shorter path name, or try renaming to shorter names before attempting this operation" I have tried everything, I have tried renaming every file in the folder, they just keep coming back, no matter how many i delete. I have tried using software such as Unlocker or devices to delete on boot, I have moved the folders location, even tried mapping a drive and deleting with command prompt - nothing.

I am at a loss, I have been trying to delete this thing since last sunday night after the upgrade, i must have spent hours doing this. Done everything suggested here: Cannot delete file or folder | Windows Problem Solver

View 3 Replies View Related

Runtime Error 75 In Windows 7 Path/file Access Error

Jun 4, 2011

How can I fix the run-time 75 error - path/file access error in windows 7?

View 1 Replies View Related

Path Is Too Deep : Error Message

Jun 5, 2009

I installed Windows 7068 in my Asus G2s Notebook, and everything worked just fine for like 2 months. But, the 7100 version was released, and i wanted it, so i backed some important files up, and formatted my computer. The installation was fine, but, when i was restoring my files from the backup, there was a particular file that wouldn't copy.

It is Fallout 3.iso file. I tried copying it like, 10 times, and everytime i tried to copy, it would stop at 2.4gb +-. After it stopped, explorer wouldnt respond, and its process couldn't be finalized. So, the only solution was to shut down the computer. I tried many things, to see if i could solve the problem (without any sucess)

-Gave full permission to the Folder and Hard Drive

-Tried to copy the file inside the HD and copy it again to my hard drive, but even copying inside the HD, it would stop at 2.4gb.

-Tried many other things, with no sucess.

Until i tried it on my mom's XP Notebook. I copied it, and on 2.4 GB it would say : Cannot copy Fallout3.iso Path is too Deep

Tried everything, but none of it worked.

View 9 Replies View Related

Error 'code: 0x80070035 The Network Path Was Not Found

Nov 26, 2009

I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.

Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error

View 4 Replies View Related

WebDAV / Add A Network Location / Path Not Valid Error

Jul 12, 2012

I can connect to my WebDAV folder on my online server by BitKinex for example, but when I want to add a Network Location to the explorer it fails with the error message that the path is not valid ... but it is valid though.

View 4 Replies View Related

Network Path Not Found - Error Code 0x80070035

Jan 20, 2009

Ok, I have a laptop and a desktop. Desktop is currently running 7 x64 and laptop is running 7 x86.

Few weeks ago I was able to access my LAPTOP from my DESKTOP normally by using the Network in the explorer. I was prompted to key in my Username and Password of my LAPTOP and I gained access after.

Now, I have no idea what happened to my DESKTOP. I am able to access other computers but not my LAPTOP. It keeps stating Network path not found with error code 0x80070035. Troubleshooting indicates no problems found.

I do dual-boot with Vista x64 on my DESKTOP and I am able to gain access to my LAPTOP using Vista.

One of the workaround I got for Windows 7 is to create HomeGroup and use my LAPTOP to join it and I can gain access to Network after that.

So, is this a HomeGroup bug and any fix for it?

EDIT: Never mind, I just re-create my password on my laptop and it's fine now. So, it's really weird.

View 1 Replies View Related

TeraCopy Open Error - System Cannot Find Path Specified

Aug 20, 2012

I'd like to use Teracopy for all copying etc. But after moving to 7 from xp it's giving me these errors. I have Win 7 Pro 64-bit. I copy from network drive for which I have read and write permissions as windows' own copy works fine. But with teracopy I immediately get error "Open error: The system cannot find the path specified". I'm trying to copy, not move, a folder with several subfolders from a network drive into local C:. I have administrator privileges. It seems that Teracopy somehow doesn't have even read permission for the network drive. Taking ownership of the network drive (samba share) is not possible.

View 5 Replies View Related

XP Mode Error Writing File Path Not Found?

Apr 28, 2011

I'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.

View 1 Replies View Related

'Path Does Not Exist' Error Constantly After Drive Letter Change?

Nov 4, 2012

Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.

For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:

View 7 Replies View Related

Unspecified Error Code 0x80070035 - Network Path Was Not Found

Nov 27, 2009

I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers. Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error.

View 9 Replies View Related

[INSTALL] Error 1324. The Folder Path 'Norwegian (Bokm?)' Contains An Invalid Character?

Apr 14, 2011

I tried to install FinalDraft8 on my system, but I'm getting the error message:"Error 1324. The folder path 'Norwegian (Bokm?)' contains an invalid character"I tried repairing the registry with CC Cleaner, but no use. his?My System Configuration:Dell Inspiron running on OS: Win 7 Home Premium 64 BitThe OS is in Korean, so I'm running Vistalizator for EN language.

View 3 Replies View Related

Reinstall Of Windows 7 HP 64-bit Error See OP Since Its Long?

Oct 15, 2012

i was using this program to try and fix a problem that i was having with backing ubut the recovery partition got messed up in the act of me trying to fix this because i decided to re-install windows 7 and wipe my drive but i didn't realize i had formatted the entire drive and now when i try to install windows 7 it gets close to the when i get the following error (with the windows login screen as the background)"the computer restarted unexpectedly or encountered an unexpected error. windows installation cannot proceed. to install windows, click 'ok' to restart the computer, and then restart the installation." so i dont know how i can fix this. i am using the recovery disk the laptop came with

View 1 Replies View Related

Recycling A Movie From Harddrive Is Taking Long Long Time?

Nov 8, 2011

Why is this. Like 10 minutes plus and it still says recycling. It should only take a second. Is it bad to let it continue at its own pace or should I restart the PC and try it again?

View 1 Replies View Related

Laptop Taking Long Time To Start - Windows Repair Error

Jan 6, 2013

Why my laptop take more time too start when i switch it on. Sometime window repair error on screen display.

View 5 Replies View Related

Explorer EXE File Error - Windows Cannot Access Specified Device / Path Or File

Jan 17, 2009

I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...

View 9 Replies View Related

"the Specified Path Does Not Exist" Error?

Jan 26, 2013

I am getting this error when I am trying to open device manager, right click oncomputer manager and I get this error the specified path does not exist check the path and then try again

View 6 Replies View Related

BSOD On Startup Error 0x000000f4 Startup Takes Long Time

Jul 27, 2012

i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.

View 7 Replies View Related

HP LaserJet 1320

Dec 13, 2009

i can't get a HP LaserJet 1320 to work on Windows 7 64-bit. It is a printer connected to an XP machine on the network, when i add the printer, it says, that the driver can't be found on the network, then i can pick a driver from disk, but the 64-bit driver package, that HP offers on their page for this printer doesn't work.

There's also an install.exe in the package, but it just says Installing for too long and does nothing.

Have you encountered this issue?

View 4 Replies View Related

Drivers For Hp Laserjet 1320?

Jul 12, 2011

i am trying to download drivers for hp laserjet 1320 printers. i went to hp website and and when i try to download it, it tells me the file is not available. can someone help me to get this drivers for my windows 7 pc?

View 5 Replies View Related