Documents Reappearing Using Seagate External
Jul 3, 2011
I utilize Windows7 Home Premium 32-bit and a 500gb SeaGate FreeAgent external. Similarly, I have on numerous occasion deleted files and done some cleaning-up (primarily 'My Documents') to no real success because they all come back after having attached my external.I do not perform a Back-up /or/ Sync anything. I simply connect my external via USB in order to locate a saved document already on the external from previous. This is all I do and at some point (not sure if it is after the next reboot or when exactly) but, all deleted docs reappear.
View 3 Replies
ADVERTISEMENT
Jul 15, 2012
I had a 2 TB, and 3TB Seagate Go HDs and decided they would be best used as internal drives, turns out they both crashed completely upon SATA connection in the motherboard, I first guessed probably due to the difference in boot record. Upon reformatting in NTFS, I have found that the drives run very sluggish, I have been debating on just buying a new USB drive and copying my files, then getting rid of these 2 HDs. This doesn't make sense to me as I used to think all HDs were the same, does anyone know any reason why these 2 external drives are killing my system performance after they were made into internal drives (also why would they completely crash before).
View 1 Replies
View Related
Oct 24, 2012
I am running Windows 7 on my computer and have somehow used windows security to lock my seagate external drive. The computer can tell that the drive is there but I cannot access anything on the drive and also cannot write to it. I have tried talking to tech support from Seagate and they said that since I have used a third party program that I need to contact them. It is difficult to get a response from them. I am a novice when it comes to things like this.
View 7 Replies
View Related
Apr 7, 2012
i am gettin the msg "Windows has stopped this device because it has reported problems. (Code 43)"...
View 3 Replies
View Related
Oct 17, 2012
When i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 2 Replies
View Related
Oct 17, 2012
when i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 1 Replies
View Related
May 5, 2012
I have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
View 3 Replies
View Related
Dec 17, 2012
I have plugged my old Seagate external hdd into my new Acer with Windows 7 64-bit Home Premium. I am trying to pull files on to the new computer. It says I don't have permission to access the folders. How do I go about getting that permission while it is plugged into the new computer?
View 8 Replies
View Related
Dec 18, 2012
how do you download Seagate external hard drive for free to my pc
View 1 Replies
View Related
Nov 7, 2010
I'm wondering if anyone else has had the following issue with USB connected external drive and Windows 7 Ultimate 64-bit:
When plugged in, the external drive is recognized by the OS, is accessible and in every aspect functions normally. After a period of non-use of the computer, e.g. 8 hours, the USB device gets knocked out. Logging back to Windows, and the 1st message will be "Unrecognized USB device", and the external drive is not visible anymore.
The only way to get the device back is to disconnect its power supply, and plug it back in.
I've done the following :
1) Changed the USB power settings of the OS. USB devices are not allowed to go to sleep
2) Changed the power setting from Seagate Manager to not allow the drive to go to sleep
3) Changed USB Legacy to Enabled on BIOS
View 1 Replies
View Related
Dec 1, 2012
I have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
View 4 Replies
View Related
Feb 18, 2010
I am getting 2 error messages. chronically I get filedeviceHarddisc volume 3$Mft. like every 10 minutes. The other is E:vlc-1.0.5-win32exe. I reinstalled the vlc program and haven't seen that error message for awhile. I checked the hard drive with seagate and it is functioning properly.
View 2 Replies
View Related
Nov 23, 2011
I reimaged my computer because I was having a whole bunch of trubble with it (no of which really matter now). After reimaging I tried to access some of the files I saved on my external hard drive, but no matter what I tried I could not get access to the files.The drive appears in device Manager and in the USB Device pages, and I have tried uninstalling and reinstalling the drive. But for some reason I just can't access the device.
View 3 Replies
View Related
Nov 20, 2012
I'm having trouble getting my Documents & Settings folder to copy into my external drive for backup purposes. The external drive already has this folder in place and the proper files and folders within D/S as I have been routinely backing it up for the last few years. However, now when I try to Copy Folder To the external drive, I get the error message that access to the J drive (external drive) is denied. As you can see from the pic below, the D/S folder on my hard drive is apparently locked. I don't recall locking it and how do I unlock it so that I can copy to to the external drive?
View 3 Replies
View Related
Nov 26, 2011
Why does this Box Keep Reappearing in IE 8,"A website wants to open web content using this program on your computer". keeps appearing each time a new screen opens? When I click "allow", the messagw appears again almost instantly. When I click "Don't allow", it appears again. Sometimes I have to close on the red "X" several times to get it to stop reappearing. The program is Adobe Flash Player that wants to open. [code]
View 1 Replies
View Related
Jan 7, 2012
I am working on a Windows Vista laptop that will not boot. After trying all options on the vista laptop for recovery and failing I decided to put the main drive in an external case...hook it up to my Windows 7 laptop and scan for virus'.It found 2 items which after looking at the location of these infected files...they were in MY profile folder on my computer.....Yet the path said ("JDocuments and Settings/Justin Gray/........." ) Drive "J" is the external. My windows profile folder is on "C". So now im really confused....I opened up My Computer, click on drive J and opened up Documents and Settings only to find it was opening the Documents and Settings folder on my C drive....Almost like it created some weird worm hole in space time and connected the two so I CAN NOT look at the actual Documents and Settings folder on the drive...If I load up in Linux (Ubuntu) I can easily access the correct Documents and Settings Folder on the drive. I am having a hard time finding and installing AV software in linux so I can't scan the drive so I had to do it through windows instead.I did...after wanting to look in documents and settings, take owner ship of the external J drive.
View 1 Replies
View Related
Mar 19, 2010
I am using the auto-hide feature for the taskbar and every time when there's a change to one of my programs (for example somebody sent me an instant message on my messenger or a program has been downloaded on firefox) the taskbar will automatically appear with the icon of the program glowing in orange. Is there a way to prevent that reappearing action?
I have tried tweaking the registry as well as gpedit.msc but still couldn't.
View 9 Replies
View Related
Oct 9, 2009
Ok I have a Dell Inspiron 1545 and my dvd drive keeps coming and going. The drive is a TSST TS-L633B 12.7 SATA Trayload 8X DVDRW. The pc is a dual core pentium with 3gb ram. When loading a dvd the drive will show up and then shortly disappear. Sometimes it will stay longer but if i pause a dvd it will disappear again and i have to either reboot or open and close the tray to get it to recognize again. I have removed the driver from device manager and i have tried updating the driver with the latest windows 7 drivers from dell with no luck. When i try to flash the drive with the latest the driver it will be there but when opening the flashing program is disappears again. I have even gone the route of getting a replacement drive from dell and it does the same exact thing.I have gone and tried the upperfilters and lowerfilters and that did no change either. I have checked the bios and the drive shows up in the bios.
View 9 Replies
View Related
Feb 10, 2010
I'm unable to delete a user administrator account that was created by a program on Hiram's boot disk. The user account was created to delete a password on another administrator account.I can run 'control userpasswords2' and delete the account, I can delete the account the normal way in User Accounts Control Panel, but each time I reboot, the account reappears. When I delete the account I can log off and log back on without seeing the deleted account. It's when I reboot that I have the problem.
View 5 Replies
View Related
Jan 2, 2011
I have a folder on my desktop which I used as a temporary location for pictures and videos. Once it was empty I deleted it but every time I open my internet browser it pops up again. I am using Mozilla Firefox and have checked the download settings but this folder is not named in any path that I can see. I also checked WMP but it doesn't appear there either. The only other program I used this folder with was Movavi to convert the video files to MP4 but it's not showing up there either.
View 3 Replies
View Related
May 2, 2010
as stated above i have a folder which keeps reappearing every time i start my computer, it's an empty folder and no other program is using it. tried removing it in safe mode and from the registry, but no results.
View 5 Replies
View Related
Jun 15, 2012
Why Windows won't apply my updates. I'm running Windows 7 Pro 64 bit. I attempt to install my updates but after refreshing the Windows Update program it says they installed successfully but is still offering the the same updates. I've ran Microsoft FixYa from their website to no avail. The updates giving me problems are:
Security Update for Windows 7 for x64-based Systems (KB2676562)
Security Update for Windows 7 for x64-based Systems (KB2709715)
Update for Windows 7 for x64-based Systems (KB2679255)
View 5 Replies
View Related
Jan 20, 2012
I have a windows7 home laptop and a Windows XP desktop.There are connected through a wireless modem. For ages the laptop could find the desktop no worries, and then for the last month or so, the desktop disappears and reappears from the network on the laptop. At the moment I can't find the desktop from the laptop.I have gone ahead and created the same workgroup name for both computers but this has not resolved the issue.
View 1 Replies
View Related
Dec 1, 2011
Does anybody know of any file converters out there (free if possible) that can convert ClarisWorks files to Office Word files? I have a lot of old documents that I wish to convert.
View 3 Replies
View Related
Sep 7, 2009
I recently upgraded from Windows Vista Business to Windows 7 Professional. The problem I am having is that my Seagate Freeagent 1TB drive wont load in Windows 7. I have to keep going to Device Manager and Uninstalling the driver and then plugging it back in so it automatically installs itself and then when I shut down the computer I have to do the process again.
I thought things that worked with Windows Vista were supposed to work with Windows 7.
Any solutions or help on this problem would be appreciated. PS I have already tried installing newer drivers, I have the latest ones, and I know this is a software issue as I am able to access the drive as normal after re-installing it each time.
View 4 Replies
View Related
Aug 2, 2012
Recently my PC just randomly crashed and upon restart, would not barely get past POST screen and get stuck on "Detecting IDE Drives...". I isolated the problem to my Seagate main drive. I went into diskpart and tried list disk, but the drive would not even display there. Does this mean my drive is pretty much dead?
View 2 Replies
View Related
Apr 23, 2012
Seagate provides a FREE download of their Seagate DiscWizard It is Acronis True Image, but slightly tweaked for Seagate.I have used it many many times for XP, and it is fairly 'idiot proof'.I cannot say the same for Windows 7 Imaging.Creating the image is 'idiot proof'Restoring the image is a mental challenge for me.Say I had just one partition on a drive, and I create an image.When you try to restore an image, you have to choose from three checkboxes
- CMD 100 MB
- OS (your real partition)
- MBR
there should be one box that you could tick to restore my simple one partition drive, BUT THERE AIN'T So I have to decide which of the three checkboxes to tick I would like to tick the lot, BUT YOU CAN'T You can only tick one at a time.I do not know which one to do first.And if that was not enough of a problem, you have to decide whether to make it Active
(Do I make the CMD Active ?)
(Do I make the OS Active ?)
(Do I position the CMD Hard left)
(Do I position the OS hard left)
And if that was not enough of a dilemma, You are given two ways to Restore the other two checkboxes
- You can do a mini reverse (Before allowing the Restore) to tick one more checkbox, OR
- You can Restore each checkbox one at a time.Either way, you still have to decide on making each Active, and 'hard lefting'.Needless to say, I got it wrong, and am about to delete all the partitions (CMD apparently being considered a partition) and try Restoring again.
View 4 Replies
View Related
Dec 28, 2010
i had to re set my pc to factory.when i plugged in my seagate ext hard drive, i cant view my documents anymore. it keeps saying i dont have permission to access the folder...i have tried renaming me as the administrator, but my head is a bit messed up with it now,, i'm not what you call a technical pc person
View 4 Replies
View Related
Jul 2, 2012
I recently purchased a usb 3.0 enclosure from silverstone model ts07b and a new 2 tb drive from seagate model ST2000DM001; the usb 3.0 card is from syba model SD-PEX20093. The problem I am having is that when I plug the enclosure into the usb 3.0 slot with the seagate hdd the computer does not recognize it, but when I plug in another 2tb drive from WD (caviar green wd20ears) the computer recognizes it. I know the seagate is not dead because when I plug the enclosure into a usb 2.0 slot the computer recognizes it. Now I need to know what I should replace, should I get a new enclosure or pci card?
View 1 Replies
View Related
May 21, 2010
Quote: Seagate has confirmed plans to release a 3TB hard disk drive later this year. However, the 3TB drive will only be recognized by 64-bit operating systems, such as Windows 7, Vista and Linux. "Not only that, but you may not even be able to see 2.1TB of a 3TB drive when using Windows XP," wrote Thinq's Ben Hardwidge Read More: Seagate says 3TB drive requires 64-bit OS | TG Daily
View 9 Replies
View Related
Aug 28, 2009
In Windows 7 RTM I have had trouble with one of my two HDs, a Seagate 300 GB. During Windows 7 installation, installer "could not find drivers" when the Seagate was the first SATA drive. Once the Western Digital drive was set as the first drive, system installed ok.
After installation, the Seagate shows in the Disk Management as 300 GB, but if look at contents with Explorer, it has only 125 GB capacity. Can this be a Seagate firmware problem? (Windows 7 RC earlier had no problems with this drive when the system had Win7RC + Vista + XP.)
View 2 Replies
View Related
