Display Awakes But Computer Won't
Aug 21, 2010
My computer, Gigabyte GA-X48-DS4 MB, worked perfectly in Win XP Pro SR3 32 bit. Computer went to sleep and would awaken immediately when mouse, Logitech LX7 wireless/optical or space bar were hit. I upgraded the OS to Win 7 Pro x64. The upgrade went well other than me having to learn the new system. One major problem is that when the computer is idle and the display turns off I have problems trying to wake the computer. I move the mouse and the display turns on immediately and the mouse will move a short distance and then freeze. The cursor will stay locked for 30 seconds to a minute and I will again be able control the mouse. However if the computer hasn't been used for a number of hours the display awakes and the mouse moves a short distance but I'm never able to regain control of the mouse as it stays locked in place and I have to reboot to use the computer. I have searched these forums and have carefully checked both the BIOS and the Advanced Power Management Setting to make sure that the computer is never allowed to Hibernate and that the HD is not turned off and that every power saving function is disabled - all to no avail.
View 9 Replies
ADVERTISEMENT
Jun 27, 2010
I am trying to get my PC to be woken from sleep by the keyboard. My keyboard and mouse are both USB devices so I have gone into my bios to enable USB devices to wake PC from sleep.Now though my PC wont go into sleep mode all it does is breifly enter sleep mode then straight away comes back out of it, is there any thing that can be done to get around this problem.
View 5 Replies
View Related
Jun 29, 2012
I'm looking to add a USB display to my computer. I don't know which brands are any good. I'd like it to display email, IE, EVGA eLeet.
View 4 Replies
View Related
Feb 18, 2012
I have just finshed building my computer and when I turn it on nothing displays on the monitor ! The case fans are running but theres no display. Also I noticed that when I turned it on the CPU fan would spin for a while then stop spin then spin again. I have tried to unplug the CPU fan and replug it back in and it still happens. Is it because of a faulty Mobo?
View 7 Replies
View Related
Nov 4, 2012
I recently built an office computer for myself and it was working fine. I turned off the computer for the night but when i turned it back on, i was getting no image on the monitor. I can hear the PC running but the display is just black; i cant see it post or anything. Also lately its as if the computer keeps starting up and then restarting; i can hear the fans wind down and then start back upI switched out monitors but that was not the issue. I used a dvi instead of vga connector but still the problem persisted. I also reset the cmos but again to no avail. I'm using IntelHD Graphics 3000[CODE]
View 4 Replies
View Related
Nov 7, 2012
My Computer display keeps freezing up after 10 or 15 mins I turn my PC on. The following is my hardware specs:
ASUS M5A88-V EVO
AMD FX6100
XFX ATI 4670 1GB
8 GB DDR3 (Corsair and Transcend - 4x2) 1333MHZ
2 TB Seagate HDD
500 GB WD HDD
Zebronics 800W power supply
LG D2342P 23" LED Display running on Dual Link DVI
I tried switching RAMs to isolate the problem but no go.I tried disconnecting the hard drives and booted from a USB stick and still the same.Removed my Graphics Card and it did make difference. The screen went blank instead of freezing up. My onboard GPU is ATI 4250.I took my Mobo to the ASUS service center and the cleared that there's no issues.There are no thermal events as well.
View 27 Replies
View Related
Feb 10, 2012
My wife recently bought Emachines(Acer)E732zg laptop and since the beginning has problem with display driver. Computer keeps freezing randomly and only way to fix it is to take the battery out for a few seconds because nothing else responds. Driver is for AMD Radeon HD 6370M graphic card and it has been updated. I fixed the problem by rolling the driver back. Now everything works fine but without graphic card which is not the point(can't hook laptop to TV anymore, play games e.t.c.).
View 1 Replies
View Related
Feb 25, 2012
I have an asian, non-unicode program on my computer and whenever I run it, all the asian characters display as little boxes I checked the internet and I got suggestions to change my system local to the language I was trying to display. After I did so, the program displayed the characters completely, but some of my other programs on my computer displays ONLY in that language (Since it reads the settings from system local)Is there a way I can display the language with an English system local?
View 5 Replies
View Related
Aug 10, 2011
The only way I could shut acer down was unpluging my computer. The moniter said "no something, I'm sorry but I forget. Is there a way with the keyboard to shut it down? I called my provider and they said it was a moniter or card problem, but it works good since i plugged it back in. I have window 7.
View 9 Replies
View Related
Jun 27, 2012
Few days ago my rig started acting up when I shut it down after the normal few seconds the display turns off but the computer itself will not shut off. I have run antispyware in safe mode as well as in normal mode also the same with the antivirus too. Even done a system restore back before it started acting up but nothing.
View 9 Replies
View Related
Apr 13, 2011
My computer all of a sudden isn't displaying the info on drop down boxes, Such as dates for ordering on line for credit card info or sizes, etc. I don't know how to fix this. I can't see the Category choices in the box below this dialog box.I don't have the money to call Microsoft.
View 1 Replies
View Related
Jun 13, 2011
how to lock display properties in win 7
View 1 Replies
View Related
Aug 30, 2012
Some of the keys on my wireless keyboard produce something entirely different on the monitor. For instance, if I press Shift, and then 2 to get an @, I get a quotation mark on the monitor. Pressing the shift and quotation mark gives me an @. This thing is made in China. Is it wired wrong or do they not know English?
View 3 Replies
View Related
Sep 16, 2012
i would like to know how i can view the computer password using cmd
View 3 Replies
View Related
Nov 7, 2012
i install avast free antivirus at my laptop and i did not reboot my computer,but when i turn off and on it display black screen
View 1 Replies
View Related
Feb 11, 2013
in my pc everything is running mouse keyboard etc but moniter dont show display and the power light is orange without still pressing power button
View -1 Replies
View Related
Aug 5, 2012
I have an HP Pavilion Elite HPE machine, Windows 7, Radeon HD 5700 Series graphics card, connected to an Acer monitor and HDTV. Here's details on my setup:
My Equipment | Building a Home Theater With Your Office PC
My problem is that even though my HDMI cable's plugged into my Radeon graphics card, sometimes the PC only recognizes the Acer monitor and not the receiver (that's connected to the HDMI cable and my HDTV). So I end up having to plug and unplug the HDMI cable several times (sometimes 10+) before it recognizes the HDTV/receiver connection. Is there any setting that would favor the card/PC recognizing the HDMI cable more frequently? I've heard it's a handshake issue, and that maybe using a different type of cable would work. But wondering if there's a setting I could use before switching out cables.
View 2 Replies
View Related
Apr 16, 2012
i have spice popkorn m9000. how to input of computer display in spice popkorn projector
View 1 Replies
View Related
Nov 19, 2009
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
View 3 Replies
View Related
Sep 22, 2012
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
View 5 Replies
View Related
Aug 10, 2011
Whenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
View 4 Replies
View Related
Oct 29, 2011
PC don't showing bios display on starting & start showing display after starting window
View 1 Replies
View Related
Aug 23, 2012
VGA cable changed ,Ram cleaned but problem not resolved
View 1 Replies
View Related
Nov 21, 2009
I am very curious to know how to connect a laptop display to another laptop display. I have an old laptop and a new laptop with windows 7. I did some extended displays to other monitors. But any one have any idea about extending to a Laptop display from another Laptop.
I am just curious. Is it possible??
View 3 Replies
View Related
Jun 7, 2011
I have Windows 7. My computer keeps crashing I have written down the stop codes, which are all different each time Also keep getting nv7ddmKm.sys.I have scanned the computer with Kapersky and also malwarebytes but both scans are clean.I can be doing anything on the computer when it happens but mainly it is when i am using Adobe CS5 or uploading images onto my computer from Nikon software installed on the computer.
View 14 Replies
View Related
Jul 31, 2011
I have ATI Radeon HD4350 512MB graphics card, it has D-Sub, DVI & HDMI sockets on rear.I have downloaded all the latest updates.I have HP 2010i LCD monitor at a resolution of 1600x900 this is connected DVI to DVI.I have a Samsung 40" 1080p LCD tv. I have this connected to my computer HDMI to HDMI.I want the computer to work on both displays... but it wont plat ball.I cannot get a display on the tv; it works on startup but when Windows 7 is loaded the display is no signal, the monitor works ok..If I turn off the monitor by the power button the tv still has no display BUT if I unplug the DVI cable from the monitor the display on the TV comes to life, when I plug it back in the tv goes blank.The GPU and Windows 7 both recognise both display units but only the monitor worksHow do I get both monitor and TV display working??
View 8 Replies
View Related
Feb 5, 2011
my desktop theme will not display correctly. The wallpaper is locked on 1 image instead of a slideshow. When I try to manually advance to the next image, nothing. I did try to save a solid background, which it let me do but when I tried to go back to my wallpaper, it would not let me display. Also, Windows will not let me create or even save my unsaved theme. I have used system restore to get a background image back but I am unable to change or save any settings in regards to desktop themes. My computer IQ is slightly newbish
[code]...
View 12 Replies
View Related
Dec 21, 2011
This is driving me mad, for the last 2 weeks I have not been able to sign in to myebay account, I am running windows 7 recently installed to replace vista hoping this would cure the problem. Everything else is working fine is just ebay sign in.Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bitProcessor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13Processor Count: 2RAM: 2039 MbGraphics Card: Mobile Intel(R) 965 Express Chipset Family, 384 MbHard Drives: C: Total - 56999 MB, Free - 23786 MB; D: Total - 1499 MB, Free - 1459 MB; E: Total - 55970 MB, Free - 54703 MB;Motherboard: TOSHIBA, Equium L40Antivirus: Norton AntiVirus, Updated and Enabled
View 13 Replies
View Related
Jan 11, 2013
I updated all my drivers using DriverMax and then verified those uploads against Intel's updated driver support scan. Both agreed with each other on the updates and that all was well. It was some week later when I was working and closed the lid on my HP dv7 (Win 7 Home Premium) opened it again within 10 seconds and ever since the screen simply doesn't come back after closing the lid. I have set all power options to Max Performance, turned off Hibernation and Sleep with no change in outcome. Checked the updated BIOS (updated via OM Intel site) and no applicable (or at least identified) power settings found.
View 3 Replies
View Related
Dec 12, 2011
I have an Asus EEE PC 1005HAB Netbook. I has been out of warranty for about a Year and a half now. It shows nothing - nothing - unless connected to an eternal monitor. But the reasons that netbooks are so cool is because they're suppose to be portable , right? This means that if I have to plug it into a big hunka monitor then I might as well use a full desktop because my netbook is no longer portable. It's been going on for about six months. I'm just really good at procrastinating. I've checked display setting, so count that out.
View 2 Replies
View Related
Mar 25, 2011
I recently purchased a Dell n5010 and i cant seem to connect it onto my 40" Bravia HD LCD.i'm trying to connect it via HDMI.. but somehow the laptop doesn't seem to display on my Bravia.At first i thought it was the cable issue, but the HDMI cable works perfectly fine on the DVD player.
View 2 Replies
View Related
