System Not Providing Proper Display Its Providing Greenesh Display

Aug 23, 2012

VGA cable changed ,Ram cleaned but problem not resolved

View 1 Replies


ADVERTISEMENT

Display/monitor 1024×768 Display Size

Nov 19, 2009

the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?

View 3 Replies View Related

Dual Display 1 Not Displaying Except On Startup; Both Display In Linux?

Sep 22, 2012

Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.

Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time

View 5 Replies View Related

All The System Is Start But Display Is Not Showing?

Feb 2, 2013

all the system is start but my displays is not showing???it shows scartches

View 3 Replies View Related

Shutdown System - Only Display Turns Off But Computer Will Not

Jun 27, 2012

Few days ago my rig started acting up when I shut it down after the normal few seconds the display turns off but the computer itself will not shut off. I have run antispyware in safe mode as well as in normal mode also the same with the antivirus too. Even done a system restore back before it started acting up but nothing.

View 9 Replies View Related

Ppc Dont Shoowing Display On Starting & Start Showing Display After Starting?

Oct 29, 2011

PC don't showing bios display on starting & start showing display after starting window

View 1 Replies View Related

Display Freezes / BSODs And Random System Crashes

Oct 27, 2011

My computer has been crashing a lot lately. Usually, the computer freezes and weird lines appear on the display when it happens. Other times it just shows a BSOD and restarts. It started happening around 2-3 weeks after my motherboard, processor and RAM were changed because a part of the previous motherboard had burnt. The previous motherboard was ASUS M3A78-EM, the onboard graphics was ATI Radeon HD 3200 and RAM was 2 GB DDR2.I took the PC to a my computer vendor after everything I tried had failed. Firstly, he diagnosed it as an issue because of improper earthing/grounding in the switchboard where I plugged the computer and the UPS. I got the earthing issue sorted but to no avail, it still hanged/freezed. The second time I took it to him he said that he might have to update the BIOS and when I brought it back the problem had apparently been fixed but that was only for a few days. After like 4-5 days it started happening again. Same weird lines - green, magenta, purple and all the rest of it - started appearing. The HDD LED stops when this happens. I only observed the LED today, though. Today the computer freezed without those weird lines on two out of the 5 or 6 times it happenrd, it looked like it had just hanged but the HDD LED had gone off.Sometimes the PC doesn't start up at all immediately after it has crashed. That's what led me to guess it's a hardware issue. Also, it happens in safe mode and Windows XP too (I dual boot Windows XP and Windows 7) and I remember it once happening even before the computer had completely booted.Computer details:Windows 7 32-bitASUS M4A78LT-M-LEAMD Athlon II X2 250ATI Radeon 3000 onboard graphics1 x 2 GB DDR3 RAM250 GB SATAMinidumps and NirSoft BlueScreenView HTML report: url..

View 13 Replies View Related

Adjust The Display Order Of System Tray Icons?

Aug 7, 2011

In Windows 7, is there a way to adjust the display order of system tray icons? I want to set a certain system tray icon to always be located first in the row.

View 2 Replies View Related

Keep System Up 24/7 Just Shutting Off Display Without Putting It To Sleep/hibernate?

Apr 22, 2011

I'm just wondering if this is something abnormal. I keep my system up 24/7 just shutting off display without putting it to sleep/hibernate. Every morning when I wake up and check the kernel memory, it's quite high >500mb. I checked with a friend and his is onli about ~300. What does this mean, a memory leak?

View 9 Replies View Related

Operating System To Start - Change Display List Time

Feb 4, 2010

How to Change Time to Display Operating Systems at Boot in Windows 7 ?

View 0 Replies View Related

No Display & Base System Device Drivers Missing On HP DV9000 Laptop

Sep 3, 2011

This morning my HP DV 9000 laptop screen comes up grey with no discerning images. I have an additional monitor attached (for TV) and booted into safe mode with networking and can see the desktop in VGA on separate monitor only.

Looking in Device MGR I have two 'base system devices that need attention. They are not identified as to what they are only PCI Bus 7 device 5 function 3 & PCI bus 7 device 5 function 2.

Win 7 Prem Home 32 bit SP1
Intel 5500 @ 1.66ghz
2GB ram
NVIDIA geoforce 7600

Last night - everything ran fine. Read newspaper online & watch TV on separate monitor. Everything closed down without issue.

View 1 Replies View Related

Extended My Laptop Display To Other Laptop Display?

Nov 21, 2009

I am very curious to know how to connect a laptop display to another laptop display. I have an old laptop and a new laptop with windows 7. I did some extended displays to other monitors. But any one have any idea about extending to a Laptop display from another Laptop.

I am just curious. Is it possible??

View 3 Replies View Related

Windows System 32 Drivers USB STOR.SYS Are Not Proper

Aug 29, 2011

I just restarted my computer and for some reason it gets stuck on the logo screen. I restarted it a few times and nothing happened, so I ran the Startup Repair tool. Here is the start of the log: Code: Startup Repair diagnosis and repair log.

View 1 Replies View Related

Reinstalling Operating System - What Is Proper Procedure With Dropbox

Feb 10, 2012

My computer had a bit of a melt down and now I think it best just to start from scratch. I am going to re-install the O/S on my Toshiba Satellite L500-19x.I use Dropbox quite a bit. Do you know the 'proper' way I should handle the process in regards to Dropbox? Will others lose access to my 'shared' folders when I do this?

View 3 Replies View Related

Installed Win7, System Will Not Boot From Proper Drive

Oct 11, 2009

I recently isntalled windows 7 professional and I have three sata drives, one is the system drive where windows 7 is installed (C, my primary partition, the other is a storage drive (F and a drive to replace the partition (Z. My boot priority for the moment is the F: drive then the C:. This is because for some reason my C: drive, even though the system is installed on it, will not boot.

I tried several things like copying the hidden system folder in F:Boot to the C drive but that did not work. I recently did a repair install but that did not restore the boot manager. Is there a way to manually set my C: drive as my primary boot drive, without jumping through hoops, I bought the Z drive to replace the F drive and need to be able to boot without it.

View 3 Replies View Related

Cannot Get A Display On Tv

Jul 31, 2011

I have ATI Radeon HD4350 512MB graphics card, it has D-Sub, DVI & HDMI sockets on rear.I have downloaded all the latest updates.I have HP 2010i LCD monitor at a resolution of 1600x900 this is connected DVI to DVI.I have a Samsung 40" 1080p LCD tv. I have this connected to my computer HDMI to HDMI.I want the computer to work on both displays... but it wont plat ball.I cannot get a display on the tv; it works on startup but when Windows 7 is loaded the display is no signal, the monitor works ok..If I turn off the monitor by the power button the tv still has no display BUT if I unplug the DVI cable from the monitor the display on the TV comes to life, when I plug it back in the tv goes blank.The GPU and Windows 7 both recognise both display units but only the monitor worksHow do I get both monitor and TV display working??

View 8 Replies View Related

Windows 7 Will Not Display?

Feb 5, 2011

my desktop theme will not display correctly. The wallpaper is locked on 1 image instead of a slideshow. When I try to manually advance to the next image, nothing. I did try to save a solid background, which it let me do but when I tried to go back to my wallpaper, it would not let me display. Also, Windows will not let me create or even save my unsaved theme. I have used system restore to get a background image back but I am unable to change or save any settings in regards to desktop themes. My computer IQ is slightly newbish

[code]...

View 12 Replies View Related

Cannot Display Webpage?

Dec 21, 2011

This is driving me mad, for the last 2 weeks I have not been able to sign in to myebay account, I am running windows 7 recently installed to replace vista hoping this would cure the problem. Everything else is working fine is just ebay sign in.Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bitProcessor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13Processor Count: 2RAM: 2039 MbGraphics Card: Mobile Intel(R) 965 Express Chipset Family, 384 MbHard Drives: C: Total - 56999 MB, Free - 23786 MB; D: Total - 1499 MB, Free - 1459 MB; E: Total - 55970 MB, Free - 54703 MB;Motherboard: TOSHIBA, Equium L40Antivirus: Norton AntiVirus, Updated and Enabled

View 13 Replies View Related

Display Down After Lid Closes

Jan 11, 2013

I updated all my drivers using DriverMax and then verified those uploads against Intel's updated driver support scan. Both agreed with each other on the updates and that all was well. It was some week later when I was working and closed the lid on my HP dv7 (Win 7 Home Premium) opened it again within 10 seconds and ever since the screen simply doesn't come back after closing the lid. I have set all power options to Max Performance, turned off Hibernation and Sleep with no change in outcome. Checked the updated BIOS (updated via OM Intel site) and no applicable (or at least identified) power settings found.

View 3 Replies View Related

No Display On Net-book?

Dec 12, 2011

I have an Asus EEE PC 1005HAB Netbook. I has been out of warranty for about a Year and a half now. It shows nothing - nothing - unless connected to an eternal monitor. But the reasons that netbooks are so cool is because they're suppose to be portable , right? This means that if I have to plug it into a big hunka monitor then I might as well use a full desktop because my netbook is no longer portable. It's been going on for about six months. I'm just really good at procrastinating. I've checked display setting, so count that out.

View 2 Replies View Related

No Display Via Hdmi

Mar 25, 2011

I recently purchased a Dell n5010 and i cant seem to connect it onto my 40" Bravia HD LCD.i'm trying to connect it via HDMI.. but somehow the laptop doesn't seem to display on my Bravia.At first i thought it was the cable issue, but the HDMI cable works perfectly fine on the DVD player.

View 2 Replies View Related

Display Drivers

Oct 13, 2009

I've got a VAIO VGN-FE11M and got some "display troubles". Everytime I close my laptop the screen stays turned off for ever. Is there any solution?

View 2 Replies View Related

Display Last User Name?

Oct 12, 2010

I have a machine with "win 7 professional" and appears in the login screen all the login accounts that I have in the workstation.I just want to display last user name?

View 3 Replies View Related

Don't Display Last User Name

May 14, 2011

I have windows 7 Professional 64 bit and I was wondering if there was anyway that I could have the "other" user account enabled (where you have to type in your username and password) and have a standard account enabled to click on and just type in the password. I've been searching everywhere online and in the local group and policy editor.

View 1 Replies View Related

No Display When Powering On

Jan 4, 2012

my Acer Aspire 9302AWSMi laptop can't display anything when I press the power button. hard disk light just keep flashing and nothing else happened. i bought this laptop in Geneva back in late 2007 but it's been like this since 2008 or 9.

View 8 Replies View Related

Display Not Bright Enough

Oct 20, 2012

I have Macular DeGeneration which causes my vision to require a lot of light or a high degree of darkness of the text and a light background to read. Example this text I am using now for this message is ok as long as I have increased the side of this display to about 2.5 times the size of the normal screen which increases the text size a lot. Trying to read email requires the magnifier option provided with Win 7 Pro, In Windows Live Mail I cannot increase the size of the windows as you can do on the Web, In talking about Windows Live Mail if I am looking at new mail which allways comes in bold I can see just infe whitout increasing the size of the font.. High contrast text makes much better reading, windows 7 Pro is much worse than XP.Increased the dots per inch that worked ok except it fouls up Expression Web 4 what I use to keep web sites up to date, It just looks to me like this, example if a person would restrict a light bulb to be lit 100% would be bright, 40% would be very dim, that looks to me like the problem in order to reduce current.

View 2 Replies View Related

Help With 2 Display Adapters

Oct 18, 2009

I have main display adapter from mainboard ( Biostar GF8100 M2 TE GeForce 8100 Socket AM2 ) and I buyed new GeForce 8500GT video card. Can I connect to computer 2 monitors using 2 different graphics card (1 main card and card I buyed ) ?

View 5 Replies View Related

Dual Display In Win 7

Jan 6, 2010

I have a desktop running Windows 7 Ultimate and a laptop running XP Pro. Is there any way to use the laptop as a second monitor? I know how to set it up physically but just don't know if the laptop has to be running the same OS or not.

View 2 Replies View Related

The Display Is Not Taken Up The Whole Screen

Nov 29, 2009

after i installed windows 7 now the display is not taken up the whole screen on my laptop any ideas.

View 9 Replies View Related

Windows 7 Display 2.5 GB Of Ram Instead Of 3.5gb?

May 10, 2012

i am using windows 7 32bit and in my computer properties it said "Installed memory ram: 4.0GB (2.5 gb ram useable)"nd in the resource manageri understand that 32bit OS can only get 3.5GB ram at max but why i only have 2.5GB ram? Does this have anything to do with my VGA 5870 which have 1GB ram?

View 5 Replies View Related

Using Samsung Led Tv As A Pc Display?

Feb 9, 2012

Set up:

OS: Windows 7 ultimate 64-bit
Graphics card: Radeon HD 5450
This graphics card is connected with a samsung syncmaster 2253bw (Main monitor) and a samsung LED TV ue40b6000vpxxn (HDMI to HDMI).
Screen Resolution Syncmaster: 1680x1050
Screen Resolution LED TV: 1920x1080p

Problem Description:

I've connected my graphics card with the hdmi 1 port of the led tv. The tv only shows a crispy image of the first few boot screens whenever i turn my desktop on. The tv shows the error "Mode Not Supported" once it gets to the account login screen. According to the tv manufacturer's manual, the screen resolution and refresh rate of both screens should match in order to get it working.

Actions taken:

I've tried out all possible screen resolution combinations at the control panel of the pc. None of them gets my tv to show what's on my main monitor screen.

Question:

Are there any other steps I can do in order to use my tv as a pc display?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved