I tried to start-up the laptop and it got past the manufacturer logo (Compaq) and then showed a blank screen for about 1 minute before saying Windows Is Loading Files and then automatically starting Start-Up Repair which tries to repair disk errors. I leave it for an hour and a bit and it's still completing.
Checked Task Manager (Repair Your Computer> Command Prompt> TASKMGR) and it was just stuck on about 356,761K of memory, so I shut down and got my Hiren Boot CD and tried opening Partition Magic, which had a Partition Table Error #105 and when I went to Format and Create New Partitions, and then Apply All Changes I got Error #4. So finally I tried some other partition manager and I got some partitions made.
I went and got my Build 7077 Windows 7 CD and tried to install, it boots to the DVD, but it detects no hard drives, although when I choose where to boot from in BIOS, it sees my 200GB hard disk fine. I HAVE NO DISK DRIVERS OR ANY CDs!!!!! Same happens with my 64-Bit RTM disk and my Vista disk. Windows XP hangs on "Inspecting 199,920 MB.
Lately I've been receiving "No Disk" errors when I start up my computer. It appears to be "NoBuClient.exe" and "CCC.exe" that result in the "There is no disk in the drive. Please insert a disk into drivedeviceharddisk6dr6" error during startup. "Dropbox.exe" and "Acrobat.exe" have also been noted to give the same "There is no disk in the drive. Please insert a disk into drivedeviceharddisk6dr6" upon launch as well.Is there any way to stop the errors from happening?
After dual booting my drive, it was suddenly changed to an offline dynamic disk. My problem is, I can turn it back online, but it gives me the status of "errors" I checked around for the past 12 hours, and everything says the same thing, turn it back online (it is) Reactivate it (That command is grayed out) Use Dynamic disk converter 2.1 (Says offline even though CMD says it is online)
Now, I am a bit frustrated, after 6 hours or so, my entire PC crashed, I did nothing special to cause this but hey it did. When I would boot up it would give "error loading OS" I checked all my drives, they're working PERFECTLY fine so I have no idea what is causing this. After I inserted my Windows 7 CD it seems to boot up fine now. I have two separate drives, one to handle my main OS being Windows 7 and the other to handle all my media which is the one that I cannot access anymore.
After reading dozens of articles I cannot find any solid answer that work for my case.
I am using the Windows 7 disk manager not a third party program, also, I have read all the 'help' from the microsoft website there is to deal with this problem. But nothing seems to work.
To help literate a bit more this is what my Disk Manager looks like:
Disk 0 Primary partition Basic 38 GB Online
Disk 1 Dynamic
errors
When right clicked on Disk 1 everything is Grayed out except properties, help, and Offline.
I don't know if any of this information will be of any help, I am trying to literate as much as I possibly can and give any evidence that might help.
Anyways, this entire thing has given me a huge headache and I have a huge term paper due x_x...
The other day i started it up but it was stuck on starting windows so i tried restarting it and it put me in startup repair so i left it on for about 8 hours and it was stuck on the sam screen not changing at all so i turned it of and i just turned it back on about 2 hours ago and its doing the same thing. my HD has 1TB and it is a toshiba im not sure what model or whatever but can someone plz help do i wait for it 2 finish or do i get a new HD. and im sorry 4 any spelling mistakes.
When I started my computer today windows was unable to full start. It got the the colorful welcome screen, and froze. I restarted and it went to chkdsk.So i ran chkdsk because it was highly recommended when I started my computer today.After a good 30 minutes it finally ended and told me a few files were unreadable and a few were deleted, scanned, etc. here is an image to help show what I mean:Afterwards, when I attempted to run Google Chrome, and a few other programs, I obtained an error message at the bottom of the screen, and when i clicked on the balloon, to hopefully get a reason or options on how to fix it, I got nothing and it popped up again, and again, and again.It is not stopping anything, it is not ending a program or closing any; it is just annoying and a little uneasing on my part of keeping this computer running.Here is an image to help express exactly what I see: how I could just turn the alert balloon off, but I would like a complete fix, not just 'duct tape'.Also, I have been getting this whenever i try to 1 uninstall a program and when I try to save an image/file:
i keep geting this poping up on scan my speed is dead shoud be at 16Mbs , its at 157kbs it slowing every thing i think . i have a new modem router a netcom nb604n
I have done a clean 32 bit Win 7 install over a previous 64 bit install on the C partition. The D partition was not touched but now is inaccessible as is my external USB hard drive. Both are NTFS and up until yesterday had no errors or problems. It is a 64 to 32 bit problem or access permissions?
As you may see I am connected to the internet but I cannot see the signal bars on the taskbar.my laptop information:Toshiba Satelite M645 S4070Windows 7 Home Premium. 64-bitI also cannot do a system restore of the check disk error i am seeing.below is an image of the results:[CODE]
so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz 2.79ghz,3.48 GB of RAM and windows is 32 bit/
One of the hard disks suddenly failed to initialized. The first problem I found on this disk was unable to open one of the zip files then the machine crashed. After I restarted the machine the HDD drive was missing from the Computer. My computer has 6 hard drives including the missing one. One is Corsair SSD for the OS and the rest are Samsung, Hitachi and WD all of them are 1TB. When I checked on the Device Manager the Drive is there and the device status is properly working. I checked on the Disk Management and I got a message to Initialize the Disk then I followed the instruction. Again I got an error message " Virtual Disk Manager - The system cannot find the file specified." On the Disk Management windows the status of the Disk is "Unknown 931.51GB Not Initialized- Unallocated". I tried to initialize but the same error I got. I did not name this drive but it named automatically RV 01 and the Location is 0.I use Acronis Disk Director to fix the problem but it cannot change the status to online. What I did last week was I installed some programs to the Drive X instead of Drive C.My computer OS is Windows 7 64bits all the drivers and software are updated.
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.
first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.
second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.
third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?
This is my first build so please excuse any greenhorn stuff... My week old ASRock Z68 PROFESSIONAL GEN3 has SM Bus Manager/Controller errors. Just did a fresh build and installed WIN7 64 bit three days ago. Got around to getting other software installed as time allowed at night. Something gave an error alert today and I went checking at device manager to see what it was.
Been having strange connectivity issues as of late, they started about a month ago, and its only now during Easter break that I'm taking the time to tackle them. The problem I'm experiencing is that during online game sessions, I would experience sudden disconnects. Thing is when I only use my browser everything seems fine. The internet connection to my house is pretty stable, nobody else is experiencing the same issues as me when it comes connectivity. I've made sure to run virus checks to see if it was a nasty virus, nothing has been found. Drivers are all up to date as well. So I checked my Event Logs and found this: TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
I have a dell lattitude lap top running windows 7. I had picked up a virus that seemed to shake up norton AV. I think I have it settled, but still can not have anyone webex in. Norton did not think this was the virus and suggest I search the OS or whatnot. Before reinstalling Windows 7, is there a program I can run similar to the old scan disk, to check for errors?
I'm running Windows 7 64bit. I regularly access a work website that has a self-signed certificate. I got tired of the warning message that always pops up regarding the untrusted certificate, so I installed the certificate. When I used to run XP, that solved the issue. However, for Windows 7 64-bit, that did not fix the problem.
I've also tried installing the certificate into the "Trusted Root Certificate Authorities" store for both my user account and for the computer. That didn't fix it either. Finally, I tried changing the security zone for the site to be in the Trusted Sites list. That also didn't fix the problem.
I find it very irritating that a website that has a "trusted" certificate is giving me a warning message about an untrusted certificate. I wonder if this is related to the Windows 7 64bit driver signing nazi-ism (i.e., you can't load device drivers signed with non-Microsoft certificates, even if you install the certificate). Just for grins, I tried disabling driver signing enforcement, but that didn't change anything either.
Problem signature: Problem Event Name: BEX Application Name: iexplore.exe
[Code].....
I haven't downloaded any toolbars, and although this is my wife's computer and she has gotten a couple viruses from visiting hacked blog sites recently ZA Pro caught those immediately so I don't think it's related to this.
i've been having bsod on win 7 for over a week, i have had these problems previously, win 7 32bit to 64bit reinstall worked last time. this time i have tried installing win 8 pro 64bit to separate ssd drive. clean install, also having similar issues. i've started debugging some of the dumps. a few have pointed to avg and the gpu. i uninstalled avg and used driver sweeper to remove video, sound and ethernet drivers. this had only made the bsod take slightly longer to happen. sometimes the are happen under load (utorrent and playing bangbang racing), other time just Internet, and even while idle(just utorrent). i have stress tested the gpu, cpu, and run check on ram and hdd. i am leaning to faulty motherboard but i don't want to fork out for a new one until i cam be 100%.
This is a run time error and the Internet has all kinds of fixes for it but they are all programs which just screw up your computer. I'm supposed to download the file and that takes a program and so forth. I would like to fix things like this without destroying my computer with all the programs out there and most of them are not for windows 7. Can someone kind of guide me on this because I'm sort of confused?
